Sunday, March 24, 2024
HomeMust ReadHow To Cover Pergola From Rain

How To Cover Pergola From Rain

Solid Vinyl Pergola Covers

A Covered Pergola Is A MUST Here’s 5 Reasons Why | Cover Your Pergola

If you need your pergola to be waterproof, you will most likely want to go with an 18 oz solid vinyl material. This comes in a wide range of colors to match your garden decor. In addition to being waterproof, solid vinyl covers will block out a considerable amount of light and heat. While this is generally desirable, keep in mind that if your pergola is directly adjacent to your house, any doors or windows that are covered by the pergola will not allow as much light into your home. This does have the benefit that the inside rooms next to the pergola will tend to be cooler and more energy efficient during warm periods.

When using a solid vinyl cover you should ideally have an angled pergola so that it sheds water. If the cover is completely flat you may get some water pooling in the middle during heavy rain.

Stitch The Canopy Fabric

Since the canopy fabric rarely will come in widths that match your pergola’s width, you’ll need to decide whether you want to stitch together separate canopy strips or leave them separate.

For example, a 12-foot wide pergola would require two strips of fabric, each 6 feet wide. You can use a sewing machine to sew the two runs of canopy fabric together. Sailcloth is too thick to sew comfortably by hand, but muslin and linen can be manually sewn. Another option is to run two or more separate canopy strips attached to the support bars, without stitched seams.


What Kind Of Waterproof Covers Can Be Used To Cover Pergolas

Related Articles

Your pergola adds an interesting element to your outdoor space, but unlike a more formal porch, it doesn’t do much to keep you out of the rain. If you’re looking for options to cover your outdoor structure — either permanently or just from season to season — you can choose from any number of materials to do the job. Some options will, of course, cost much more than others.

Recommended Reading: How To Wash Patio Cushions

Why Pergolas Are Usually Not Covered

Pergolas are usually not covered because they are designed to allow air and light to pass through. A pergola with a cover would not provide the same airflow and light exposure, defeating the purpose of the pergola. Additionally, a covered pergola would be more susceptible to moisture damage and rot.

Related articles

Attach The Support Bars To The Canopy

Pergola Rain Covers

To attach the canopy fabric to the support bars:

  • Stretch the canopy out on a clean surface.
  • Using a tape measure and tailor’s chalk or a carpenter’s pencil, lightly mark intended support bar locations along the edges of the canopy fabric. For the canopy to slide properly, the support bars must be parallel to each other and all bars should be perpendicular to the sides of the canopy. Support bars should be located at each end of the canopy, as well.
  • At each pair of marks, slide a support bar under the canopy and staple the canopy to the bar. Repeat for every set of marks.
  • Don’t Miss: How To Remove Green Mildew From Patio Umbrella


    About Our Polycarbonate Sheets

    MAIN PROPERTIES OF MONOLITHIC SHEETS

    Monolithic sheets is a material with an excellent combination of physical and mechanical properties, which are retained under various temperature conditions and humidity levels.

    Polycarbonate sheets are an ideal replacement for traditional glazing materials. They are safe and easy to cut, install and use, almost impossible to break. Due to their low specific weight, polycarbonate sheets can significantly lighten and reduce the cost of the supporting structure in comparison with the structure in which glass is used, contributing to a significant reduction in transportation, handling and installation costs.

    UV protection

    Solar radiation has a detrimental effect on polymeric materials, causing their destruction and causing surface cracking of materials. These small cracks are further enlarged by water, dust and chemicals.


    Polycarbonate monolithic sheets of this have a surface with an applied protective layer against ultraviolet radiation, which provides excellent resistance to weathering.

    Arched glazing

    All monolithic polycarbonate sheets are cold-formed into curved supporting glazing profiles. Provided that the bending radius of the sheet is greater than the minimum recommended value, the mechanical stress resulting from cold forming will not affect the mechanical properties of the sheet.The guaranteed service life of the sheets is 15 years.

    How Do You Slope A Pergola

    Is there such a thing as how do you slope a pergola? Pergolas are, by far, the most popular type of pergola.

    If you are remodeling or building a new home, or even if you are building a new home, then the chances are good that you will need a pergola or perhaps, a patio in some form.


    As with any type of structure, there are always factors that you need to consider before getting the installation of a new pergola. One of those factors is how you slope your pergola. Not only is it a simple task but it is also quite important.

    Firstly, there are some factors to consider when you are looking at the slope of the pergola. These factors will depend upon the size of the pergola and the design of the building. So, these factors will depend upon the building that you are installing a pergola in.

    However, before you are concerned about the slope of your pergola, you need to be aware of what goes into planning the construction of the structure.

    First of all, you should consider your use of the pergola. After all, you will want to make sure that you are making the best use of the structure. This is because it will be used in many different environments.

    Secondly, you should consider the weather of the area that you live in. Also, you should plan for the weather that you expect in the future.


    Therefore, the slope of the pergola needs to be based on the type of weather that you expect to see in the future.

    Recommended Reading: How To Get Mold Stains Out Of Patio Cushions

    What Is The Difference Between Water Resistant Water Repellent And Waterproof

    Water-resistant – This offers the lowest level of water protection. If a retractable awning fabric resists water, its usually because the fabric itself is acting as a barrier between you and a very light shower. Tightly woven fabrics will offer a very small degree of water resistance, as it takes some time for the water to seep through the material. It is not impervious to water penetration but can stand a very limited exposure to precipitation. However, with the addition of a coating or impregnation, you can make a retractable awning fabric water repellent.

    Water repellent – a step up from water resistance and offers a medium level of water protection. This means that water cant easily penetrate the material . It beads on the outside instead. However, as soon as you apply pressure like the skies suddenly opening and releasing a whole load of heavy rain, rainwater starts to seep in through the coating, the fabric, and onto your patio or deck.

    Waterproof – A waterproof material or product is one that is completely impervious to water penetration and offers the highest level of water protection including heavy rain. No water can get in or out of the product or material or around the edges. A waterproof material or product is able to provide sustained protection from water.


    RetractableAwnings.com does not offer water-resistant fabric. We only offer water repellent fabrics on our folding lateral arm awnings and waterproof fabrics on all* of our retractable roof pergolas.

    Modern Sun Shade And Waterproof Pergola Roof

    Clear Pergola Roof Is PERFECT For Inside-Outside Feel | Cover Your Pergola

    A sunshade cover is the most popular option for most homeowners because it provides good protection against both heat and cold. These covers are made from a metal frame that supports a lattice-like fabric attached to it by metal rods. The lattice lets in some light but blocks most UV rays, which helps keep your pergola cool in the summer and warm in the winter.

    The biggest drawback with this type of cover is that it can be expensive to install because it requires custom-made frames and attachments for each individual frame. You may also need to replace these types of covers every few years as they wear out or become damaged from weather conditions such as strong winds or hail storms .

    Also Check: How Much To Power Wash Patio

    How To Waterproof Pergola How To Seal Pergola From Cracks

    It is essential to maintain the pergola not only for its appearance but also to extend its life. Also, it is essential to know the waterproofing methods to protect your pergola from harsh weather conditions.


    When it comes to waterproofing your pergola, you have to understand the material to proceed with waterproofing techniques. Usually, the pergola is made of four materials such as wood, vinyl, fiberglass and metal.

    Among the materials, you need to consider waterproofing wood and metal since vinyl and fiberglass already possess waterproofing characteristics.

    Lets check out the waterproofing methods for your pergola in detail below.

  • 5.2.1 How does it work?
  • How Do I Cover My Pergola For Winter

    One of the best ways to adapt your pergola for winter use is to add a roof. A roof will keep the snow and rain out, and will also help keep any heat from below in. A louvered roof is a great option for a pergola. It allows you to choose the amount of light to let in, or completely seal the area from the elements. via

    Don’t Miss: How To Screen In Your Patio

    Installing The Clear Roof Panels

    Now we were finally ready for the roof! All that prep took way more time that actually adding the roof, but I know proper prep is important .

    We discovered that our house is not square on the property and made our pergola line up with the fence so it didnt look crooked. So our roofing had to be measured carefully to ensure the overhang was the proper distance all the way down.

    So we measured the start and end of every 26 panel and cut each one individually. It ended up being that each panel was 1/4 longer at the back end than the front end. We put the slightly diagonal cut line against the crooked house and left the factory cut line at the overhang.

    To cut the panels, we clamped a level to create our cut line and used a circular saw to run right down the edge of it. It was super quick to measure and cut each one. The sound of the saw hitting each corrugation is a little scary at first, but it cuts so clean that there is no need to worry.

    After cutting we placed the beautiful clear roof panels on top of the pergola. They just sit onto the horizontal and vertical closure strips. Once in place, it is time to start securing it.

    Each screw hole needs to be predrilled with a 1/4 drill bit first to allow for expansion and contraction due to change in temperatures. Without this there might be cracking and that is not desirable! So we used both sets of hands to make quick work of it.

    One person predrilled the holes and the other one came in behind with the special screws.

    • 222.0K

    Have It Installed Or Built Yourself

    Know About Fantastic Pergola Covers of your House

    Of course you can have your new pergola installed. That is easy because you do not have to worry about it. But a do-it-yourself pergola can also easily be realized. Regarding the construction, it is of course a little less complex than you name it a garden house. And of course you can buy packages in which you will find all wooden parts pre-sawn. Including the necessary hardware such as angle irons, screws or bolts. But cutting and machining the wooden parts of your pergola yourself will also not be a huge challenge for many do-it-yourselfers.

    • Very economical: depending on the porosity an average1 liter is sufficient for 88 ft².
    • Available in 1 / 2,5 / 5 / 10 / 25 Liter.

    Recommended Reading: How Much Is It To Build A Patio Cover

    How To Renovate A Studio Apartment

    Pergolas are outside structures constructed of wood, aluminum or vinyl. Slats at the top of the structure provide partial shade. By adding a cover to the pergola, you can increase the amount of shade, protect the area beneath from the elements and make it a more comfortable space to use during most times of the year.

    How Do You Cover A Pergola When It’s Raining

    A fabric cover provides shade, but for rain or snow protection you’ll need something more sturdy. You can purchase a pergola with a metal roof, or you can build your own waterproof cover out of corrugated metal or plastic. As a bonus, the raindrops will sound beautiful as they hit the solid pergola cover. via

    Recommended Reading: How Deep Should A Patio Sub Base Be

    Pergola Or Louvered Roof

    The type of roof that you have will also impact how rain-proof/resistant your pergola is. One of the most popular types of pergola is the louvered roof. This style features, typically aluminum, slanted rafters that can easily be adjusted to account for the angle of the sun.

    With the louvered pergola, you can close off the roof so that no sun gets through, or you can open it up completely for maximum sunshine.

    The same mindset can be applied to the rain. If a storm is just around the corner, you can prepare your space by closing off the roof so that no rain slips through and ruins your experience. Many of these louvered-roof pergolas also feature a drainage system so that the rain doesnt collect and fall when you open the pergola back up. As far as rain protection goes, a louvered pergola is a must.

    Trim The Wire Ropes And Attach Turnbuckles

    Detached Pergola Gets Premium Cover | Cover Your Pergola

    Extend each of the turnbuckles out as far as they will go by turning the two ends counter-clockwise to each other. Attach the three turnbuckles with the hook end to the three remaining eye screws on the pergola. Extend the free end of each wire rope to the eye end of the turnbuckles to get a general sense of where to cut the ends. Add 4 inches to your measurement and cut there, using wire cutters.

    You May Like: How To Clean Concrete Patio Of Mold

    Diy Pergola Cover Ideas For Your Patio

    Everybody loves to have a good time out of their homes, especially when the weather is harsh. Set up a cover for your pergola so you can enjoy the outdoors in your patio during any season without having to suffer extreme weather conditions like rain or scorching heat from the sun.

    If you have a pergola in your home, youll find it an excellent place to hang out in mild seasons when the sun is not so hot, and there is no rainfall. The pergola provides some form of shade in this weather condition and allows you to enjoy the outdoors so you can cook, play or hang out with friends and family. During peak sunny and rainy seasons, the effectiveness of pergolas wanes, and it becomes difficult to enjoy the cool and space the outdoors bring.

    Unlike pavilions, pergolas do not come with top covers and provide very little shade when it gets sunny or when it rains. It is because of this discomfort the need for pergola covers has become highly sought after.

    There are different materials you can use as pergola covers, including straws, plants, wood, bamboo, fabric, and even metal. Whatever that can provide you with the necessary cover and remain attractive. Some of these materials are more expensive than others some may require frequent replacement while others would last you a long time, some are temporary fixes, while others are more permanent options.

    Also Read:

  • Summary
  • How Do You Build Apergola With A Sloped Roof

    How do you build a pergola with a sloped roof? By the help of agood set of plans.

    Now, what if I told you that you could build a pergola by using your backyard and some straight sticks? You can actually create the pergola in a couple of hours with minimal tools. Why donât you try building your own?

    Letâs get started on building your own pergola. First, take apiece of wood and line it up against a wall. Drill a hole in the middle of thewood. You should have about 1â³ left over, this is going to be your ridgepole or the support pole for the top of the pergola.

    Now, cut a 3â³ diameter circle out of your wood and mark theedges of the ridge pole. This will help you line the wood up properly later on.Line the edges of the wood up along the mark.

    Start by cutting your wood about half an inch deeper than themark, so that you can make grooves cuts through the wood and make your pergolathat much easier to build.

    Make sure you donât cut all the way through, just the bareminimum amount that you need to do so you can make the grooves later.

    Once you have the grooves cut, remove the ridge pole. Next, usea pocketknife to remove the wood from the grooves with no problem.

    Read Also: How To Clean Bluestone Patio

    How To Protect The Pergola From Rain

    There are a few ways to protect your pergola from rain. One way is to install gutters on your pergola to divert the water away from the structure. Another way is to use a waterproofing agent on the wood to help protect it from moisture. You can also install a canopy or roof over your pergola to keep the rain from hitting the structure.

    How Can A Pergola Be Covered From The Rain

    Pergola Rain Covers
    • on May 09, 2019

      Hi Patricia,

      Many ways and materials can be used – also grow fast growing climbers over it. I am doing this at this moment myself. We have fitted Netlon plastic wire netting on top between the rafters and planted various climbers at base of every upright. Ours are in the ground, but you could plant up tubs just as well……

    • Emily on May 10, 2019

      We have two pergolas or arbors. If we had wanted rain protection it would have to have been done before the growth of the grape vines, you would also have to allow for some slant to the material. I would choose plexiglass a/c not so expensive and would allow some light.

    • Enjoylife on May 16, 2019

      I have clear fiberglass panel covering the top. Then I put Amazon basic shower curtain rods extending from one corner to the other and hung clear vinyl shower curtains it will take two curtains for each side. Overlapped the curtains when hanging adds extra weight to curtain keeping them from blowing when windy

    Read Also: Who Makes Fortunoff Patio Furniture


    RELATED ARTICLES

    Most Popular