Sunday, April 14, 2024
HomeFurnitureHow To Touch Up Cast Aluminum Patio Furniture

How To Touch Up Cast Aluminum Patio Furniture

Prevent Stains From Forming In The First Place

If you have children who like playing outside, make sure they dont leave their fingerprints all over your cast aluminum furniture!

A simple way to avoid this problem is by applying a non-toxic anti-bacterial spray before each use.

These sprays contain natural ingredients such as lemon juice which helps protect against bacteria growth without leaving behind harmful chemicals.


Outdoor Furniture Painting Instructions

Before:Outdoor Dining Table and Chairs

This is my 15 year old outdoor dining table and chairs. The set is in great shape, but the green color has faded and no longer coordinates with my other outdoor furnishings. It needed a color makeover.

Armed with a few rolls of ScotchBlue Painters Tape and I set out to make it happen.


After: Outdoor Dining Table and Chairs 

After some DIYing and a few rain delays, I am now the proud owner of what looks like a brand new set of outdoor furniture.

Without the use of  ScotchBlue Painters tape, I would have had to remove the seat slings from the frames way too hard.  I simply protected the slings before I painted with the tape and newspaper.

How Do You Restore Powder Coated Aluminum


Clean an area with soap and water with a sponge or scrub pad. Observe the aluminum while it is clean and still wet. If the color and luster return, then your aluminum can be restored to look great again. An Everbrite Trial Kit will restore about 25 square Feet or up to 100 linear feet of window frames.

How To Paint Outdoor Furniture With Sling Seats

supplies needed:

  • ScotchBlue Painters Tape  I needed 2 rolls of the 2-inch wide tape to mask 6 chairs and used half a roll Advanced Multi-Surface tape with Edge Lock for the glass table top.
  • Newspaper
  • Drop cloths
  • Sanding block with medium grit sandpaper
  • Spray paint I used 4 cans of Rustoleum Hammered Brown for 6 chairs and the table.  Make sure that whatever spray paint that you use is a Primer + Paint formula. 
  • Small-tip paint brush for touch-ups
  • Bucket of soapy water and scrub brush to clean all surfaces before painting
  • Before bringing the chairs to my garage to paint, I ran a sanding block on all the metal surfaces to rough them up a bit. This will help with paint adhesion.  I then scrubbed them down with mold and mildew cleaner. I rinsed well and let them dry.
  • I lined my garage with drop cloths and started the job of masking the slings on each chair and the glass on the table so that no overspray paint would get on them.


    2. I placed the ScotchBlue Painters tape right up to the edge of the metal frame of the chairs.  To make sure the tape is sealed and locked into place run your fingertip over the edge of the tape.   Repeat taping on both sides of the top and underside of the chair.

    3. I then covered the sling with newspaper and taped it on. I ran my fingertip over the edge on all the tape to make sure it was sealed.

    After a few hours I had them all covered and ready for paint.

    7. After I made sure there was no green showing, I removed the tape and the newspaper.


    Ten Benefits Of Cast Aluminum Patio Furniture

    Aluminum patio furniture touch up paint

    1. No Rust – Aluminum doesn’t rust. Steel and iron do.

    2. Long Lasting – No rust, durable finishes, and strongconstruction. Expect 30+ years out of a good set.

    3. Low Maintenance – Besides cleaning occasionally, thereis really no other upkeep.

    4. Nearly Weather Proof – Handles severe environmentswell, including heat, rain, sunlight, salt, etc. Also handles cold better thanmost other types of outdoor furniture.


    5. Easy to Clean – Just hose down every once in awhileand use a mild soap if necessary.

    6. Solid and Strong – Can withstand many years offrequent use. Hard to bend or break. Will feel more stable than some other typesof furniture.

    7. Many Styles and Designs – An abundance of styles tochoose from. From traditional to trendy, you pick.

    8. Many Finishes Available – While usually powder coated,many color options and “textures” can be had.

    9. Works well with Cushions – Use cast aluminum patiofurniture with or without cushions or pillows.


    10. Perfect Weight – Light enough to be easily moved andlifted. Heavy enough to feel firm and stable and not blow around in the wind.

    How Do You Touch Up Cast Aluminum Patio Furniture

    4.5/5cast aluminum patio furnitureTouch Up Small Nicks, Chips and Minor Scratches

  • Spray a small amount of touch up paint into a disposable bowl.
  • Use the small paintbrush to apply the paint in thin coats until the desired coverage is achieved.
  • Frame TouchUpFor aluminum, rough up the surface slightly with 100-grit sandpaper, then smooth with 220-grit paper. There’s no need to prime just apply an exterior-grade acrylic enamel paint. Use a tiny touchup brush on nicks, a spray can on bigger scratches.

    Secondly, how do you touch up powder coated patio furniture? Remove all loose and flaking coatings from the damaged area with a wire brush or putty knife. Scrubbing the surface with sandpaper can remove the more stubborn chipped powder coating. Fine-grit sandpaper is recommended, as coarse-grit paper could leave noticeable scratches on the surface.

    Additionally, how do you restore cast aluminum patio?

    Sand your castaluminum patio furniture with moist, 120-grit sandpaper, or a handheld rotary tool with a 120-grit sanding accessory, until it has a dull, even surface. Spray off any sanding debris with a garden hose. Dry the surface of the furniture with a clean cloth.

    How do I rejuvenate the metal on my outdoor furniture?

    Get The Right Products

    When choosing products for cleaning your cast aluminium garden furniture ready, make sure you choose the right kind.

    Most cleaners contain harsh chemicals which could damage the finish over time.

    Instead, opt for natural alternatives such as baking soda and lemon juice.

    These ingredients work much better than traditional cleaning agents and wont harm the paint adhesion job.

    How To Redo Cast Aluminum Outdoor Furniture

    Related Articles

    Patio furniture has to face four seasons and all sorts of inclement weather. These punishing conditions can quickly degrade the surface and structure of any material. Metal furniture stands up better to harsh conditions, but ferrous metals like iron and steel can rust. Aluminum does not rust, and cast aluminum has a strength comparable to ferrous metals. If your cast-aluminum patio furniture has become weathered with time and use, you can redo it with the right materials and technique.

  • Sand your cast-aluminum patio furniture with moist, 120-grit sandpaper, or a handheld rotary tool with a 120-grit sanding accessory, until it has a dull, even surface.

  • Spray off any sanding debris with a garden hose.

  • Dry the surface of the furniture with a clean cloth.

  • Clean the sanded surface of the furniture with mineral spirits applied with a clean cloth.

  • Move the furniture to a well-ventilated area out of direct sunlight.

  • Put on a respirator.

  • Spray a coat of epoxy primer over the entire surface of the furniture. Allow the primer to dry completely according to the manufacturer’s instructions.

  • Spray a coat of polyurethane topcoat paint to the entire surface of the furniture. Allow the topcoat paint to dry completely according to the manufacturer’s instructions.

  • Things You Will Need

    • 100-grit sandpaper or handheld rotary tool with fine-grit sanding accessory

    • Garden hose

    • Polyurethane paint

    Warning

    References

    How Touch Up Large Scratches And Scrapes

  • Hold the spray paint can about 4 to 6 inches away from the scratch and spray one light coat, keeping your arm in motion to avoid excessive build-up. Use your other hand to hold the cardboard behind the area you’re spraying to catch any overspray.
  • Wait 10 minutes or when the paint is dry to the touch, go back over with another spray, continuing to add thin coats until the scratch disappears.
  • To enhance a slight texture, wait 3 to 5 minutes for the last coat to become tacky and then pat with a damp, lint free cloth.
  • Caution: Tropitone warns against attempting to get full coverage with the first coat of paint. Solvents in the spray paint may cause the surrounding finish to loosen and wrinkle if one heavy coat is applied.

    Why Is It Necessary To Paint Cast Aluminum Alloys

    • Colored aluminum alloy does not refer to the furnitures aesthetic value but the painting does.
    • While aluminum itself is corrosion resistant, the elements of its alloys are not, so aluminum alloys oxidation can still be possible. Therefore, the appropriate coating will prevent oxygen from reaching the metal underneath and help resist corrosion.

    Telescope Casual Has Been Producing Quality Outdoor Patio Furniture For Over A Century

    Telescope patio furniture touch up paint. This telescope casual furniture touch up paint graphic has 20 dominated colors which include white rattan petrified oak snowflake sunny pavement medallion vodka namakabe brown iris eyes purple amethyst swing sage ivory honeydew worn wooden vapour sefid white lovely euphoric delight foundation white kickstart purple bellflower. Slings straps and even frames take a beating from acid rain wind sun and chemicals. When applied properly it may be used by the diy customer as a top coat.

    Each quantity is a pack of 4 cans and each can is 12 oz. 1 16 of 206 results for patio furniture paint rust oleum 7218830 dark bronze 4 7 out of 5 stars 2 272 15 01 15. 89 year old telescope patriarch still walks to work every day.

    Telescope casual has been producing quality outdoor patio furniture for over a century. This telescope casual furniture belle isle graphic has 20 dominated colors which include white sunny pavement ivory snowflake muted berry monastic colossus copper lake camel hide ivory cream steel. This spray paint is used for touch up on our powder and electrostatic coatings at our a redemption restoration facility in pa.

    01 44 15 kg get it as soon as fri oct 16 free shipping on your first order shipped by amazon more buying. 2018 design excellence award winner. Our products feature the highest quality of any porch and patio.

    Replacing A Mesh Sling

    BEFORE YOU START

    · Order a new sling: To find width, measure from the center of one rail to the center of the opposite rail at the bolt locations typically found at the top and bottom of the sling. To find length, lay a cloth tape measure along the top face of one rail so it follows the rail’s curvature.

    1. Slash the old sling down the middle with a utility knife. Remove the end cap on each side rail.

    2. Slide the two halves of the sling out of their tracks in the chair’s rails. Loosen but don’t remove the bolts that attach the rails to the chair frame, then pop out the spreader bar.

    3. Remove one rail entirely. Hold the sling with its hem side to the back and slide its nylon rod into the track of the rail that’s still attached to the chair frame.

    4. Slide the detached rail over the sling’s other nylon rod. Bolt this rail back on the frame. Tighten the loose bolts on the opposite rail to make the sling taut.

    5. Reinsert the spreader bar. Use a pipe clamp to spread the rails slightly; if need be, bend the bar a bit to make it fit, then hit it with a rubber mallet to restore its shape.

    6. With a wire cutter, trim each rod flush with the end of the rail. Push the end caps back on the rails.

    Using Vinegar For Cleansing

    Touch Up Paint For Cast Aluminum Patio Furniture

    If you want to go even further than soaking your pieces in soapy bucket of water, consider pouring vinegar on top of them instead.

    Vinegar works well when used in conjunction with other methods since it will help break down grease and oil left on the surface after cleaning.

    To get started, mix equal parts white vinegar and lukewarm water together in a bowl.

    Then soak a rag in the mixture and apply it to the affected areas.

    Leave the piece under the sun until all traces of the liquid have evaporated.

    How To Paint Aluminum Patio Furniture

    Just like everything else in our home, our outdoor spaces have been a process too! What started as a pile of bricks has transformed into a patio where we love to spend time in the warmer months ! We ALSO love hand-me-downs and updating them to fit our home.

    After 20 years of life and 3 different homes, this aluminum and mesh patio furniture is still going strong! The paint has faded and the fabric doesnt quite fit our style, but I think this falls into the category of they dont make em like this anymore!

    Picking Your Spray Paint

    Yall, spray painting is so simple and inexpensive. This is a project any of you can do. The hardest part will be picking your color. Im convinced youll have great results with multiple types of spray paints and brands, but we decided on for its durability. We found ours at Home Depot for $6.98 a can, but . Id say a downside to choosing brand and type is that it comes in limited colors, but luckily they are all neutrals!

    If we didnt go with the Metallic line, we would have gone with Rust-Oleum Painters Touch 2X Ultracover in Satin, which is $2 less at $4.48.

    Both the Metallic and Painters Touch can spray both the aluminum/metal as well as the plastic mesh fabric of the chairs HUGE WIN! The number of pieces you have in your set will determine how much spray paint you need to purchase.

    Our set:
    TOTAL CANS NEEDED: 10 / TOTAL COST: 10 x $7.98 = $79.80

    Metal Patio Furniture Buying Guide: Steel Iron Or Aluminum

    Whether made of steel, iron or aluminum, metal patio furniture is designed to withstand harsh weather conditions and frequent outdoor use. As you shop, consider the benefits and drawbacks of each type of material and your furniture needs.

    Steel Pros and Cons

    Stainless steel is a wonderful stylish metal that will keep your patio furniture looking nice for many years. It is resistant to wet weather as well as rust.

    Steel furniture can be very heavy, which makes it hard to move or rearrange. It can also be much more expensive than other types of metal furniture. It requires frequent maintenance to stay in good shape and to keep it continually resistant to weather, though it is more resistant than most metals. As with all metals, steel will get hot in hot weather and cold in cold weather, which could add some discomfort if not covered during use.

    Iron Pros and Cons

    Wrought iron furniture is very sturdy furniture that is always in style. You do not have to worry about your furniture being damaged or blown away in severe weather because of its sturdiness and durability.

    You can change or update its appearance and add materials from time to time to give your patio a fresh look, so that you do not have to worry about becoming tired of your current look or about the furniture going out of style.

    Aluminum Pros and Cons

    Whichever kind of metal you decide to invest in, make sure that you upkeep it properly so that you will be able to enjoy your furniture for years.

    Natural Wicker Cleaning Method

  • Prepare your work space in a well ventilated area such as an open garage or backyard patio.
  • Place the wicker piece on a drop cloth to catch cleaning solutions, sanding debris and paint. Use additional drop cloths if needed to protect any nearby walls or objects.
  • Using the duster brush attachment on the vacuum hose, go over the entire surface of the wicker furniture to remove any loose debris, dust or cobwebs.
  • Remove any flaking or peeling paint with a stiff wire brush or sandpaper taking care not to damage the woven material. If the furniture has a glossy lacquer or varnish finish, apply the liquid sander, following the package instructions.
  • Go over the entire surface again using the sponge and soapy water to remove any grease or oily deposits on the wicker surface.
  • If you come across any mildew, apply the bleach solution to the affected areas with a sponge.
  • Rinse the bleach by spraying the area with clean water. Allow the furniture to air dry completely.
  • How Do You Prepare Cast Aluminum For Painting

    How to Paint Cast Aluminum

  • Clean any slimy or greasy areas of the cast aluminum using a chemical degreaser.
  • Clean the aluminum thoroughly using a pressure washer.
  • Apply blue painters tape to all areas you want to protect from primer or paint.
  • Apply the zinc chromate-based primer to the cast aluminum using the 3 to 4-inch oil-based paintbrush.
  • Aluminum Patio Furniture Care

    There is not a lot of work involved in aluminum patio furniture care. This type of outdoor furnishing, particularly cast aluminum, is specifically developed for its ease of care and flexibility. Nonetheless, it is necessary to maintain the furniture to extend its life as far as possible and to preserve any finish on the metal.

    Different Types

    Aluminum furniture is lighter than chairs and tables made from other materials, and it is not as susceptible to rust or mold. There are three types of furniture crafted from this material: cast aluminum , tubular aluminum , and wrought aluminum .

    All three types are sprayed with a powder-coated finish, which is then heated to a high temperature for an excellent protective coating.

    Cleaning Aluminum Furniture

    Dirt and grime are common culprits if there is any kind of corrosion on the surface of your chairs and table, so frequent cleaning to prevent buildup is important. Remove any decorative cushions or furniture accessories before cleaning since they will require a separate process to remove any stains or mildew growth. Use a garden hose with a spray or rain setting to remove the largest pieces of dirt and debris from the metal. Avoid using a pressure washer or a strong setting on a garden hose nozzle since a too strong and focused stream of water could damage the furnitures finish.

    Remove Any Scuffs

    Rinse Thoroughly

    Protection

    Plastic Wrap Or Tarps

    Using plastic shrink wrap is a relatively easy way to protect your outdoor furniture. You can buy the plastic wrap yourself or hire a team to come out and cover it for you. This type of protection is popular in the Northeast where high-wind snowstorms are common.

    However, plastic isnt breathable. If water gets through it wont be able to escape, resulting in mold and mildew. The likelihood of water creeping in rises if you have furniture with pointy edges. Furniture can tear through the plastic if you purchase a cheap plastic or it is wrapped incorrectly.

    This cost for this service typically starts around $200 and goes up from there based on how many pieces you own. While that may seem like an affordable option in comparison to buying several covers, you will have to pay that $200+ year after year.

    A tarp faces the same breathability issue as shrink wrap. Any water that gets in wont be able to evaporate. You will need to secure the tarp with multiple bungee cords or rope to ensure it doesnt fly off during high winds. A tarp that is too large can still catch air and blow off or knock your furniture over.

    How To Paint Aluminum And Mesh Patio Furniture

    Antique Cast Aluminum Patio Furniture

    If you follow me over on , you know I was debating between painting the entire chair the same color and painting the mesh a different color, but we ended up painting everything the same. The benefits for this are a lot less time and simplicity.

    If you are looking for a low budget addition to your patio, these well-loved patio sets can be found on Facebook Marketplace or Craigslist and are just waiting for an update!

    Heres how to paint your set:
  • Purchase your spray paint.
  • Clean off your set !
  • Tape off glass or any areas you dont want painted.
  • Lay down a drop cloth and move furniture to a well-ventilated area .
  • Start painting your first coat! If youre painting your mesh fabric, be sure to paint both the front and the back for the best coverage.
  • Wait 30 minutes and start with your second coat! The mesh definitely needs a second coat, but you could at least touch up the aluminum. The paint dries quickly!
  • Youre done! Wait 24 hours to sit on and enjoy.
  • How To Touch Up Small Nicks Chips And Minor Scratches

  • Use the brush that came with the touch up paint to fill in and cover exposed metal. Apply thin coats to build up and blend the color.
  • If using spray paint, spray a small amount of paint onto a disposable plate. Use a small paintbrush to apply the paint, adding thin coats until the desired coverage is achieved.
  • Cast Aluminum Furniture Care & Maintenance

    With simple, regular maintenance and care, cast aluminum patio furniture will provide years of enjoyment. Although patio furniture is designed specifically for outdoor use, years of exposure to sun and rain will take their tollOver time, aluminum furniture can become weathered, and the shine can fade if not taken care of. Here are the steps you need to follow to clean and maintain your cast aluminum furniture.

    Accessories For Cast Aluminum Patio Furniture

    You might want to get cushions for your patio furniture. Thesecan be found in a variety of shapes, sizes, colors, patterns, and designs. Theymight already be included with your furniture set.

    Cushions will need to be stored when not in use in order toprolong their life and keep them from becoming covered with mildew. Chances are,the cushions will not last as long as the aluminum furniture itself, butreplacement patio chair cushions are available.

    While not absolutely necessary with cast aluminum, you mightconsider covers for your patio furniture. Aluminum is durable on its own, buteven so, patio furniture covers will help prolong the lifespan.

    Final Thoughts About Cast Aluminum Furniture

    Adding cast aluminum patio furniture to your outdoor space can create an inviting and tranquil area for years to come. This beautiful, low-maintenance material is available in the form of benches and chairs for garden areas, bistro table and seating sets that fit comfortably on small patios or balconies as well as club chairs and full-size dining tables for outdoor entertaining when you have plenty of space. The options are almost limitless, and cast aluminum is worth the investment.

    Repairing Scratches & Scrapes In Finish

    Touch-up paint to match your frame color is available at Casual Marketplace or from your manufacturer. Place the frame in an open area with plenty of ventilation preferably outdoors.  Using a very fine grit sand paper lightly sand the damaged area until smooth with the rest of the surface. Using a clean rag lightly dipped in rubbing alcohol or mineral spirits, wipe the sanded area clean of dirt and oil. This primes the affected area and provides the maximum bonding surface for the paint to adhere.  Shake spray can for at least one minute.  Holding the spray can 8 10 inches away from surface to be touched up, spray the damaged area lightly in an even left toright motion.  This action helps to prevent paint runs.  For best results, make two to three light coats allowing paint to dry in between coats.  Read the information affixed to the spray can for additional information.  Touch up applications should be limited to as small an area as necessary to repair the damage.  Be sure to use the left to right motion when touching up to feather the area into the established finish area.  Wait until paint is very dry before determining if an additional coat is needed.

    How Do You Paint Corroded Cast Aluminum

    Put on a dust mask and eye protection to prevent inhaling metal dust and to prevent the dust from getting into your eyes. Spray the metal with a spray paint remover designed to remove paint from metal. Allow the remover to sit on the aluminum for about 10 minutes. Wipe away any remover residue with a soft cloth.


    RELATED ARTICLES

    Most Popular