Wednesday, June 15, 2022
HomeBuildHow To Build A Tin Roof Patio Cover

How To Build A Tin Roof Patio Cover



Installing A Clear Pergola Roof Was The Best Decision Ever It Has Turned Our Side Yard Is A Three Season Patio That We Can Enjoy In Any Weather

We love our new patio pergola, but the only thing that could make it better was installing a clear pergola roof. Now even if it decides to rain for an entire month , we can still enjoy gatherings on the patio.

Adding a roof to a pergola seems like a big deal, but we partnered with the Home Depot to make it easy! Now we cannot wait for another storm so we can test out our new clear pergola roof.

This post may contain affiliate links. As an Amazon Associate I earn from qualifying purchases.


After installing the on the kids outdoor playhouse, I knew I wanted to use it again. It looks so nice and is absolutely DIY friendly.

But my favorite part is that it lets the light in but blocks out the UV rays. Blocking UV rays on the patio means all our patio furniture will last longer. No more fading and sun bleaching! And we can enjoy the patio even if the weather decides to rain out another of our parties!

The biggest decision we had was whether to use the same Solar Gray color on the patio as we had on the playhouse roof. I love that the playhouse has the extra shading so the kids can play in it all summer long and it stays a bit cooler.

Originally I had planned on using the shading color for the patio pergola too. Then I realized the patio is completely shaded by the house in the late afternoon on and our neighbor’s trees block most of the direct sun in the morning, so we would only have direct sun for a small portion of the day.


Beginning At The Outside Edge Of Your Roof Place Each Panel Directly Onto The Purlins That Are Attached To The Roof Trusses

How to install tin roof on porch. Above the structural trusses or rafters, your roof will be covered in 3/8” or 1/2” tongue and groove plywood. Instead, you can build a porch covering that attaches to the house like the marquee in this article. See more ideas about metal roof, porch, house exterior.

Measure the porch to find the best length and width for a tin porch roof. In this article, we are going to explore both financial and technical aspects when it comes to looking for the best method to insulate the metal roofing. A marquee is a roof or other type of protection built over a door or window, but the principles for building or rebuilding a porch roof are similar.

Installing a tin porch roof on your home would typically cost around $5 to $12 per square foot, or $1,200 to $2,880 for a 16’ x 20’ porch. Corrugated panels need to be fastened about every 6 inches. Click the image for larger image size and more details.

Because the gutter is removed, you will need to install transfer flashing from the roof of the house to the patio. Whether you are looking to install a metal roof on a shed or a house, it’s important to know the difference in the various types of metal roofs available. As it has been mentioned in the prior point, corrugated metal roof has lightweight quality, so naturally it doesn’t need much of material for structural support.


Read How To Cook Parboiled Rice In The OvenRead How To Become A Rapper At 14

Read How To Sell Insurance From Home

Diy Clear Corrugated Covered Pergola Attached To The House And An Existing Deck

Covering our deck has been on the to-do list since last year when we refinished our old deck with new paint and stain. For this project we built a DIY covered pergola attached to the house and attached to our existing deck. We then covered the DIY pergola with clear corrugated plastic roofing sheets to create a dry, sunny, outdoor living space. Here is the complete DIY tutorial for building a clear corrugated covered pergola attached to the house and an existing deck!


Simple Diy Patio Cover Ideas To Make Your Outdoor Spaces Enjoyable

These DIY patio cover ideas will enable you to reasonably quickly and cheaply design and build your own outdoor shade. Check them out.

You need to make several considerations if you want to build a patio cover for your outdoor space. What material to use? What kind of plans to follow? And it all depends on your patio and backyard setup. No case is the same, so it’s up to you to choose the right options. We aim to guide you through.

What’s Inside?

  • Cover with a Kit
  • Some Steps On How To Attach A Patio Roof To An Existing House

    How to Attach A Patio Roof to An Existing House and 10 ...


    Attaching a patio roof to an existing house is not a doddle, but it does not mean that you cannot do it. You just need some assistances of experts if you are not really good at carpentry.

    Before attaching a patio roof to your home, you need to prepare some materials such as:

    • Nail gun
    • Ledger

    Steps:

    • Measure the sightline clearance height from the roof to the house, not the other way around.
    • Measure the size of the beam that you are going to use.
    • You can either remove the eave or just keep it.
    • Using lag bolts and a screwdriver, fasten the base of the posts to the ground. You have to make sure that they sit plumb.
    • Make a cutting on one of the sides of the horizontal roof beam on an angle. You have to do it thoroughly so that the rafters sit flush on it.
    • Attach the horizontal beam by using a nail gun. After that, to make it flush with the roof of the existing house, cut the two outer rafters.
    • Now you can begin assembling the outer rafters and attaching the rafter beam to the edge of the roof of the house.
    • Cut each of the house ends while continuing installing the rafters so that they fit the top of the rafter beam perfectly.
    • When all the rafters are installed correctly, form your patio roof by attaching the planks horizontally across the rafters.
    • If you are going to use shingles to cover the patio roof, do not forget to install black roofing felt along with a single layer of oriented strand board. When they are installed, you can begin attaching roofing shingles.

    General Instructions For Building A Patio Polycarbonate Roof

    Build a cover patio is not an exclusive job for professional people. On this guide, we go through the few steps required to build a beautiful roof for you patio. First of all you want to take the measurement of the roof support. If you’re building it for the first time, consider building the structure with purlins at a proper distance. The purlins which of those ones need to be spaced no more than 800mm between each other. Consider also at least a  slope, This will ensure correct water run-off. Moreover, Ensure the side that has UV protection is facing the sun. This is the side with an adhesive label or ink-jet marking on the edge.


    Most Common Ways To Attach A Patio Roof To An Existing House

    Attaching a patio roof entails intermediate carpentry skills and creativity because there are many ways that you can choose from.

    All of them have their own advantages and drawbacks. When installed correctly, the patio roof will complement the house and provide an extra entertainment for you and your family for all year round.

    Here are 7 different ways of attaching a patio roof to an existing house that you can apply.


    Covered Patio Ideas To Make The Most Of Your Outdoor Space

    Your patio does not have to endure rain and other problems all of the time. It is practical to possess covered patio ideas and utilize them the simplest you are able to. The main priority must be on quality and also you have to adjust and fit with your own ideas. After you let that happen, nothing is going to stand in your way, and so try to consider that. Regardless of the season, covered patios are sure to be beneficial all year round and also are certain to increase the potential resale value of your room. All things considered, they make for the desired semi-living room like area which can quickly function as an extension of your living area while guarding you against weather conditions that are bad, as well as the sunshine overhead.

    Regardless of your design choice or maybe the amount of area you’ve to work with, it is just sensible to have a full charge in developing a luxurious outside location while experiencing the warm weather, as well as the idyllic experience of the exterior and the gardens. From minimalist dining feel to vibrant designs to ultra-modern takes on doing the most effective use of the area you’ve to work with, the possibilities with regards to patio cover ideas are limitless.

    Step 9: Double Check For A Better Freestanding Patio Cover

    Now you have the structure of a freestanding patio cover. You can begin to cover the patio with the materials of your choice such as lattice wood, translucent fiberglass, wood and shingles, metal panels , boards and netting, or canvas shade sails.

    The structure that you have just made is the simplest one. There are various kinds of structures available that suit your patio very well.

    But you have to remember to double-check the level of the whole patio before adding the roof. For more freestanding patio cover ideas, check out these ten fantastic patios.

    Stunning 21 Images How To Build A Lean To Roof On A Porch

    21 Photos

    Do you find how to build a lean to roof on a porch. We have some best ideas of images for your interest, choose one or more of these awesome photos. Hopefully useful. We got information from each image that we get, including set size and resolution.

    We added information from each image that we get, including set of size and resolution. Navigate your pointer, and click the picture to see the large or full size photo. If you think this is a useful collection you can hit like/share button, so more people can get these collection too. Right here, you can see one of our how to build a lean to roof on a porch gallery, there are many picture that you can surf, we hope you like them too.

    In that case, the body not be properly aligned, which includes the power of the automotive seat and the safety of your little one. Read and observe the manufacturer’s instructions to insure the correct set up of the seat. A portable automotive seat helps stop critical injuries in case of a automotive accident, so you want to search out out if the seat has even been in an accident. This way child can continue to sleep when being moved from the car to the home, as a substitute of you having to wake them up. Rear going through seats present one of the best protection if there is an impact, particularly since your baby won’t be able to support the load of their very own head but. The web site gives a preview of some of the company’s best work.

    Related Tags:

    How To Connect A Shed Roof Over A Deck On A Pitched Roof

    A shed roof is a simple slanted type that carries water off one end. Although it’s called a shed roof, it commonly is built over a deck, patio or porch and tied into the house, carrying water away from the house. Shed roofs are simple to build. Many use basic post and beam construction with rafters to hold roofing.

    How To Build A Patio Cover With A Corrugated Metal Roof

    Learn the basics of building a patio cover with a corrugated metal roof. 

    One of the simplest and most affordable ways to add some shade and cover to your outdoor space.

    One of the most basic and cost effective ways to create a great shady covered area for your patio space is a patio cover made with a corrugated metal roof.

    The corrugated metal is inexpensive to purchase, lightweight to install, and provides a sturdy way to keep both the rain and hot sun off your patio.

    The corrugations naturally channel the water downward along the slope of the roof either into a gutter or into the landscaping, much in the same way a sloped patio channels water away from your foundation.

     

    Tiege Hanley Level 1: Covering Skin Care For Men Basics

    How to Build a Patio Cover With a Corrugated Metal Roof ...

    This provides a complete system for you to get started. The Level 1 version of the Tiege Hanley Skin Care System gets you going without feeling like you’ve left something out.

    It’s got the daily cleanser we talked about to help clean and prep your skin, an exfoliating scrub to get rid of bacteria, and AM/PM moisturizers to keep your skin healthy and smooth.

    Fabulous Small Patio Ideas To Make Most Of Small Space

    March 24, 2015

    These DIY patio cover plans will show you how to cover an existing patio so you can enjoy the outdoor space more during the summer. Construct a covering so the area will be shaded and provide you with an increased outdoor living space for you and your family.

    Building a patio cover will improve the appearance of your home, increase the value of your home, and increase the amount of time you can use the outdoor space every year.

    One of these 21 DIY patio cover plans will be just right to meet your roofing needs so check them out today.

    You may also like to check out my other interesting and relevant articles such as: small patio ideas, patio decorating ideas, diy pergolas and diy gazebo plans.

    Tiege Hanley Level 3: Reducing Fine Lines And Wrinkles

    “Aged and rugged” certainly is a look anybody can sport with pride, but that phase of a man’s life shouldn’t arrive early. 

    The Tiege Hanley Skin Care System Level 3 includes the Facial Firming Serum as well as the items listed in Level 1 and Level 2 , offering a well-rounded approach for a simplified men’s skin care routine.

    The Men’s Skin Care System has been developed by Tiege Hanley with the intent to help men look and feel great by providing a no-hassle and affordable option.

    A Freestanding Patio Tends To Be Easier To Install

    Attaching the cover of your patio on the roof of your house can be arduous and harmful. If the structure of the roof is not strong enough, it cannot support the cover.

    Unlike the ones that rely on the roof of a house, a freestanding patio is stronger and safer because it is supported by four posts that do not rely on any other buildings.

    Apply The Solid/vented Tape And Fasten The Sheets

    As soon as you apply the first sheet, you can start fastening it with our specifically designed screws. Start from one corner and work your way along screwing only into the purlins. Not into the rafters. Once fastened the first sheet, you can apply the H profile. In this case we are using a polycarbonate profile that can be easily cut at the proper length of the sheet. Just apply it on the length side of the first sheet and proceed fastening the second polycarbonate multiwall sheet after have added it inside the H profile.

    How Much Does It Cost To Build A Roof Over A Deck

    The cost to cover a deck will depend on a number of factors. These factors include the type of material, the size of the roof, and how complicated it will be to build. Currently, the cost to add a roof over your patio will start at $2,000 and increase from there. Contact a local roofing company to get started and schedule an estimate for your project.

    Freestanding Patio Cover With Traditional Accent

    This patio provides a bit traditional accent to your backyard. It is like the ones that you can encounter in Bali.

    The stained wooden posts give a more natural and impressive look to the patio. The exposed beam ceiling makes the patio look more attractive although it does not feature sophisticated patterns.

    The black roof shingle plays an important role in creating the traditional ambiance. It suits the chairs perfectly.

    Since the roof slopes down from the center, it does not accumulate water, snow, and leaves which makes it easier to clean.

    Prevent The Splash Of The Rain Let The Air Flow

    The ultimate goal of installing a patio roof is to protect you from the rain and the glare of the sunlight. Unfortunately, it requires you to block the air flow sometimes.

    To prevent the splash of the rain, but let the air flow, you need to place the patio sheeting over the top of the roof about 300 millimeters so that it can perform shield from the rain without blocking the airflow.

    It is your best bet especially if you have a fully-covered patio which do not have much airflow.

    Getting A Building Permit For Your Patio Cover

    How to Build a Patio Cover With a Corrugated Metal Roof ...

    “It’s just a simple patio cover with a corrugated metal roof…I don’t need a permit right?”

    Wrong.

    A building permit is legally required if you want to put together a patio cover, or any permanent outdoor structure on your property for that matter.

    It is another step to make sure everything is done safely and it gives your town a record of the work you’re doing.

    A permit doesn’t raise your taxes nor does it require a licensed contractor to apply for.

    Take your drawings and plans to your local permit and licensing office. They’ll have some papers for you to fill out and a small fee to pay .

    Many times you can find these online at your county or city’s website and fill them out ahead of time.

    A building inspector and structural expert will review the plans and your current structure.

    They’ll make recommendations and finally stamp your drawings. Only with a stamp can you start building.

    If you start building without a permit and an inspector drives by or a neighbor calls it in, the county can come make you tear the whole thing down and charge you a hefty fine on top of it.

    So better to get your paperwork in order beforehand.

     

    Tiege Hanley Level 2: Combatting Trouble Spots

    Tiege Hanley Skin Care System Level 2 has everything from Level 1, plus an eye cream to help address those extra concerns you might have there.

    It’s important to use products that are specifically made for the skin around your eyes because it’s generally more sensitive.

    If your eyes have been looking more tired lately, start with level 2 from Tiege Hanley.

    How To Build A Shed Roof Over My Existing Deck

    Unless you’re experienced in residential roofing construction, you probably don’t want to build the roof yourself. However, you might want to know the process of how it’s done. Take a look at our step-by-step guide for building a shed roof over your existing deck:

  • Step 1: Before you begin, make sure you’re matching the house roof pitch angle and overhang for your roof.
  • Step 2: Install post base connectors. These are used to attach the support posts to the frame of the deck. For a solid connection, you’ll have to make sure the frame has the appropriate blocking.
  • Step 3: Install the support posts to the post base connectors.
  • Step 4: Keep the support posts in place by installing temporary bracing. The tops of the support posts should be notched to hold the header beam.
  • Step 5: Install the header beams to the support posts. We recommend using thru bolts for a strong connection.
  • Step 6: Install the ledger board, which will support the rafters. You can install it by flashing and bolting in place to the house wall.
  • Step 7: Mark and cut your rafter angle to the roof pitch and then lay out your rafters. Nail the rafters in place to the ledger board.
  • Step 8: Attach the rafters to the header using framing nails.
  • Step 9: Create the subroof by installing the roof sheathing over the rafters.
  • Moisturize: Morning And Evening Moisturizers

    A moisturizer is sure to help things along in the skin health and appearances department. The right moisturizers help to soften skin, reduce wrinkles and crow’s feet, reduce inflammation and redness, and firm up your skin.

    A solid skin care routine will have daily AM and PM moisturizers. Morning ones, like the one Tiege Hanley offers, contain sunblock to protect against the damage the sun causes to skin. If your morning moisturizer doesn’t contain SPF, it might be time for a switch.

    Protecting your skin against sun damage is another men’s skin care basic step that you need to be aware of! This will help your skin stay younger-looking for much longer.

    The general rule of thumb on wearing a morning moisturizer with SPF is that you should wear it every day no matter what. Apply it when it’s cold or cloudy. Just use it!

    Evening creams, also known as PM creams and night creams, are designed to sooth, comfort and hydrate all night long. They keep your skin from drying out overnight and fresher in the morning. 

    Try not to make it a one or the other situation. Find time for both creams to appreciate the full benefits that come with a well-established men’s skin care routine.

    Getting A Building Permit For A Patio Cover

    Some people said a building permit was unnecessary, while others said it was impossible to get without a contractor’s license, or that it would raise my property tax, etc. So I called the permit and licensing office and got the correct answers.

    • Yes, a permit was required.
    • No, it wouldn’t raise my taxes,
    • As long as the property owner didn’t care if I wasn’t a licensed contractor, they didn’t either.

    Getting the building permit was actually much easier than I thought. I took the plans to the town’s permit and licensing office, filled out some paperwork, and the next morning I got a call and went back to the permit office to pick up and pay for the permit, which came to $85. They made a couple of alterations to the plan that not only were easy to accommodate but also made the project easier and cheaper! To prepare for the final inspection, I took pictures of each critical step to show the building inspector, which made the final inspection a snap.

    Building Permit

    Method 1 Of 2:installing Corrugated Roofing

  • 1Cut the panels to the desired length. Most panels come up to 32 feet in length. Allow for a minimum of 18 inches if you need to lap to complete the run.

    Cutting tools:Angle grinder:XResearch source The fastest option. Wear hearing and eye protection. Paint or prime cut edges to prevent rust.Circular saw:XResearch source Slower than angle grinder, but follow same instructions. Use a metal blade and expect it to wear quickly.Nibbler: Effective if rated for the right metal and gauge.Tin snips:XResearch source Slow but safe. Wear work gloves and find the longest pair you can.

  • 2Pre-drill holes on the ridges. Some panels have pre-drilled holes. If yours do not, then you will need to drill holes in them. Use a 3?16 in drill bit.XResearch source
  • Spacing for the holes on the ends and sides of the panels should be 6 to 8 inches .
  • 3Install the panels. Place them directly onto purlins that are attached to the roof trusses, beginning on the outside edge.XResearch source
  • Close or seal off the ends with a wood or plastic strip under the panel at each end. These will stop the entry of rain, wind, and pests.
  • 4Screw down the panels. Pre-drill the holes, and use 10 by 2 in screws with polycarbonate washers.XResearch source
  • Continue across the roof until it is completely covered, lapping over the previous panel by at least 2.5 inches minimum.
  • Adjust the lap so that the last panel completes the coverage without making a cut lengthwise.
  • Install Some Riser Brackets For More Height

    If you wish to reach a specific height, you can lift the roof of the patio with some riser brackets. The patio roof which is raised with some brackets requires a custom barge cap.

    It will not only allow you to raise the ceiling up to 2 feet, but also give various splendid options for the finishing look and relaxed ambiance.

    You can go with opaque twin wall sheeting if you want to get some natural light for your patio.

    Opaque twin wall sheeting that is installed between the roof of the patio and the barge cap allows natural light to pass through.

    If you are not really into natural light and want to block it, you can infill the gap between the patio roof and barge cap, and seal the rear opening.

    To get a cleaner and nicer look, you can add some extra flashing wall covering. After that, you can seal the brackets from the front.

    Selecting Materials To Build A Patio Cover

    While looks are important, you want to make sure that the materials fit the structure. Since my patio cover was going to have a slight slope, shingles were out. A tar roof would work, but it would be a heavy smell like a BP oil spill. I decided on corrugated metal roofing because it’s resistant to high winds, is lightweight, and is structurally sound.

    Using corrugated metal also allows me to reduce the degree of slope, or roof pitch needed to a mere 10 percent, or a 1-to-10 pitch. This meant the patio cover could start at the edge of the house’s roof at a height of eight feet and slope down to seven feet, leaving a clearance of more than six and a half feet between the lowest part of the frame’s headers and the ground at its outer edge.

    Where The Patio Cover Attaches To The Roof

    How to Build a Patio Cover With a Corrugated Metal Roof ...

    More detail about joining the patio cover to the existing roof.

    Jed Fisher

    This article is accurate and true to the best of the author’s knowledge. Content is for informational or entertainment purposes only and does not substitute for personal counsel or professional advice in business, financial, legal, or technical matters.

    Tongue And Groove Freestanding Patio Cover

    This patio is such a great place to spend your afternoon. It can also make a great living room in which you can invite your friends and colleagues to come over for some tea or coffee.

    Each post features natural stones that complement the fireplace as well as accentuating the patio.

    The tongue-and-groove ceiling creates an epic finish look. Each of the roof sides has a glass window that allows natural light to pass through.

    Pros:

    • Natural stones around each post are the icing on the cake.
    • The tongue-and-groove ceiling makes the patio look more attractive.

    Con:

    • Installing tongue-and-groove ceiling can be arduous and take a lot of time.

    Pictures Of Metal Roof Patio Cover Designs

    1,336 metal roof patio cover products are offered for sale by suppliers on alibaba.com, of which arches, arbours, pergolas & bridge accounts for 13%, awnings you can also choose from easily assembled metal roof patio cover, as well as from pvc, polycarbonate, and pc metal roof patio. Hi, i am trying to add a low slope metal roof cover to my rear patio of my u shaped home. Metal roof porch covers style outdoor patio heater propane inside cover designs plandsg com.

    Full Protection From The Sun Snow And Rain

    If you are looking for something that can give you the ultimate protection from the heat of the sun, rain, and snow, you need to take metal roofing to your consideration.

    This metal roofing suits the style of the house very much. Besides accentuating the house, it gives you the protection that you need as it is attached directly to the wall.

    Beginning Construction On The Patio Cover

    Early the next morning the materials arrived at my house. Once the materials were unloaded, I began carrying the ten-foot-long boards and corrugated metal sheets to the backyard, laying them out in a pattern to roughly match how they would be assembled.

    I also separated the corrugated metal sheets, wiped each one down with a light coat of vegetable oil, and then re-stacked them. This was something I had seen a neighbor do a long time ago when I was a child. I don’t know if it served any purpose other than making me feel better. It’s a step I probably could have skipped, but who was I to doubt the wisdom of the ancients?

    Ledger Board Installation

    A Full Skin Care Solution In Tiege Hanley

    We’ve already been sharing it throughout the basic steps, but if you haven’t caught it yet, Tiege Hanley offers a full skin care routine in three easy-to-follow steps that cover the basics. This complete routine sets the stage for clearer, healthier skin.

    Tiege Hanley built their system around the basic skin care steps every guy needs: WASH, SCRUB , and MOISTURIZE. From there, they add the optional System 2 and 3 upgrades.

    Tiege Hanley’s system is not complicated and cuts back on the men’s skin care confusion and time lost in the bathroom. When it comes to skin care, self-care, and the daily routine, every minute counts. 

    While it’s great that many more guys are getting into skin care routines, they might not be getting the best advice or solutions from their network of friends and family. 

    What one person uses might be right for them, but may not be right for you. That’s why it’s important to seek out brands that know what they’re doing and even consult with a dermatologist.

    The Tiege Hanley Skin Care System gives you a simplified starting point to cover your skin care basics. The customizable options ensure everybody gets what they need.

    All that’s left to do is to choose a level and put the routine in place. Let’s review one last time:



    RELATED ARTICLES

    Most Popular