Monday, May 20, 2024
HomeFurnitureHow To Stop Patio Umbrella From Spinning

How To Stop Patio Umbrella From Spinning

Materials And Colours For Cantilevers And Parasol Bases:

Materials and colours are important to think about when making your decision to purchase a base for your umbrella. We offer 3 types of materials: granite, metal and concrete. Though you can never go wrong with the polished, durable and very elegant looking black granite parasol base, for some gardens or patios the grey granite parasol base version may be a better fit. The tube is made of stainless steel and powder-coated to ensure it remains rust-free.

#4 Close It When You Are Not Using

If you are not using the patio umbrella, it should be closed, tied, and stored somewhere safe. There is no reason to keep it open when it isnt currently doing its job. For the stand, when the umbrella isnt being used, use the patio umbrella stand cover to protect it from dust, dirt, or moisture if you are using a wooden stand.

For through-table patio umbrellas, you should also protect the hole on the table from dust and dirt using a patio table umbrella hole plug. It is a hard habit to keep up, so if you are not fond of closing the umbrella when you are not using it, at least do it when it’s stormy or raining heavily outside.

How To Stop Your Umbrella From Blowing Away This Summer

Umbrellas are a crucial element for every set of patio furniture. Without shade from the summer sun, patios can be unbearably hot. But umbrellas cover your patio without all of the complications of a permanent structure or rolling shades. They can help regulate your patios temperature, reduce glare, and even help protect your outdoor accessories from sun damage while theyre out in the open. If umbrellas have any flaw at all, its that windy weather can cause problems. An open umbrella catches the wind and can rattle around in its stand. Umbrellas that arent properly secured can even blow away or topple over in a particularly strong gust of wind. If you want to make sure your umbrellas stays firmly in place this summer, find the right umbrella base.

Here Are A Few Techniques That You Can Obtain To Strengthen The Base

DIY Sandbags: This is an easy and inexpensive solution to add weight to your umbrella base. Theyre easy to make and easy to install, and doesnt cost much either, but highly functional to beef up the base. Add a few to your default base to give it additional strength.

Supplemental Weight Bags: If your umbrella is more than 9 inches in diameter, you may try using a supplemental weight bag. Its a better way of adding add-on weight to your base, and they can add up to a hundred pounds of weight.

Use Gravel to Add weight: An easy yet effective way to add weight to your base is to fill a bucket with colorful gravels and insert the pole into that. It will not only add weight to the base but also create an excellent look.

The Cinder Block Method: This is another inexpensive yet effective way to add extra weight to the base. Paint a cinder block, then slide it under the base and afterward insert the pole into the hole of the block.

Lead Bags: Tube-shaped lead boxes are small yet heavy, and they are useful in adding extra weight to the base. Use a few of them to beef-up your base.

Go For a cantilever umbrella base: Cantilever umbrellas need much more weight due to their design, thus their bases are made to compliment that. You can go for a cantilever umbrella base even if you dont have one of those umbrellas. This base gives much better stability. However, theyre a little expensive as well.

Patio Umbrellas With Vents

How to Prevent a Patio Umbrella From Spinning or Falling ...

Where the choice of base is mainly around the stability of your patio umbrella the choice for the actual umbrella depends on its intended use and therefore shape, size, and style. Two of my favorites having considered their reviews are:

The . It gets a good recommendation from The Spruce as well as Amazon and with the vented canopy offers good value. Being Aluminium it is not a forgiving as Fiberglass if it should fall over but shouldnt happen a suitable base!

The 9ft x 12ft. It also gets good reviews but dont forget that you will need weights to hold the base down. Either paving slabs or their that give you at least 160lbs / 70Kg.

Go For A Sturdier Frame

Finally, if you dont want to go through all of the hassle involved in buying a cone wedge or other things, you should just consider opting for a steadier frame.

A steadier frame is going to be more expensive, but its definitely worth the money in the long run. You dont have to worry about the umbrella topping over either.

Ideally, when selecting a frame, look for one that has a painted coat as that will prevent any kind of rusting in the future and also make it easier for you to clean the frame from time to time.

How To Rotate Or Tilt Your Residential Umbrellas For Wind

December 19th, 2019 by Poggesi USA |Posted in Cantilever Umbrella,

A solid, wind-resistant umbrella can provide safety and security from harsh UV rays and rain showers, and is also designed as a sturdier umbrella that can stand up to wind or sudden gusts. There are certain important features that are combined to create the best wind-resistant residential umbrellas.

A strong and solid base is vital to anchor the patio umbrella securely, preventing it from lifting and flying or from falling over. The umbrella also needs to have a sturdy and strong pole structure to withstand all types of weather, such as a commercial grade aluminum pole. The material used for the canopy should be long-lasting and durable, like a double-stitched Sunbrella canvas.

A great choice for wind-resistance is a cantilever umbrella, which is suspended and supported by a support rod placed to one side rather than in the middle of the canopy. The unique design imparts strength, stability, safety and versatility. This arrangement also helps to keep the pole out of the way, and your view unobstructed, while allowing a larger area to be shaded.

Cantilever umbrellas can be raised or lowered and tilted to permit movement from left to right, forward and backward or even a full 360-degree rotation. The angle of the umbrella can be easily changed to provide protection at all times without moving the position of the umbrella base.

Luxury Outdoor Solutions

Ways To Keep Your Patio Umbrella From Falling Over

Theres nothing more frustrating than having your patio umbrella fall over from the wind and get damaged or harm someone nearby.

Spending time outside under your patio umbrella is supposed to be relaxing and enjoyable on a sunny day, but you constantly find yourself worrying about it falling over.

So, how do you keep a patio umbrella from falling over?

In this article, we are going to walk through everything you need to keep your patio umbrella secure so you can stop worrying and start enjoying your relaxation time outside.

Less Is Not Always Better

It is common sense that by reducing the amount of canopy, you will reduce the windage, your umbrella will experience less wind force and therefore be less likely to take off. That is true, unless, the force of the wind is actually helping you!

If you have your umbrella angled into the wind then the force of the wind may actually help push the umbrella down.

Note: This is only really appropriate for beach umbrellas where the whole post can be angled as opposed to patio umbrellas which may only have a tilting top.

Why Tilting your Patio Umbrella Doesnt help in a Breeze

When you tilt the top of your Patio Umbrella towards the wind, the wind force will indeed help to push it down, instead of just horizontally. However, it is still pushing it down to the outside of the base, so it is still inclined to topple. When you then also consider all the extra windage, meaning the wind force is now much greater, it is not a good idea to tilt your Patio umbrella when it is windy.

#4: How To Stop A Spinning Patio Umbrella With Popsicle Stick

With a little strong flow of air, few umbrellas tend to start spinning which is absolutely frustrating and disturbing to keep looking at. But you could fix that for free, with just a popsicle stick and a pair of pliers. Heres how:

  • Where the support pole connects with the base, theres a screw that you can hand-tight or loose. You might have tried to tight it as much as you can to prevent the pole from spinning but no results. This time, loosen it fully.
  • Slide a popsicle stick in from the top end of the base so that it reaches the level of the head of the screw from the inside of the tube. The idea is that you want to keep the stick in between the head of the screw and the surface of the support pole so that things tighten up.
  • Now tighten the screw as far as you can hand tight and then tighten it a little bit more with your pair of pliers and youre done it wont spin anymore even if you apply force manually.
  • Heres the video demonstration:

    #2: How To Replace Umbrella String

    Before you jump into the replacement process, you want to remove the fabric so you can play just with the skeleton which makes the job much more convenient.

    To do that, unscrew the finial at the top and take it out. Then start losing the fabric around the skeleton by removing it one by one from the ribs. There will be pockets on the fabric where ribs are inserted.

    Pull the fabric outwards until the ribs come sliding out of the pocket. Do this for all the ribs until the fabric is totally free from the skeleton, except for the ties. Therell be ties on each of the ribs which you need to untie and the fabric should be separated from the skeleton by now.

    Now lets replace the string:

  • Take off the housing of the crank handle. Simply grab a small screwdriver and loosen all 4 screws and the housing should come off leaving your crank handle exposed and naked.
  • Your crank handle is attached to one side of the bar and at the other side of the bar, youll find bolts and cotter pins that are holding the crank onto the bar. Grab needle nose pliers and straighten the cotter pin so itll come out of the hole.
  • Therell be three more things A bolt, a plastic gear, and a washer. You want to take all of those off and your crank handle should be free to remove. Pull the crank with some force using a back and forth twisting motion and it should come out.
  • It might seem long but its a quite simple process once you catch the core function. Heres a tutorial to help with:

    What Should I Fill My Parasol Base With

    If your parasol comes with an empty plastic base, it can be filled with water or sand, depending on how heavy you want it to be. If you plan to relocate its position, water is recommended. Otherwise, for a better stability, it should be filled with sand, because sand it is heavier than water. Plastic parasol bases have the advantage of different weight possibilities, depending what you fill it with, better mobility and easier storage. Some of their cons ar that they coud be damaged easier and they have shorter life than the solid ones.

    How To Repair A Patio Umbrella Yourself From 4 Common Problems

    How to Stop Your Patio Umbrella from Spinning

    Patricia J. Moore

    Having a patio umbrella is all nice and fun until it starts to turn its back on you and cause problems. A patio umbrella is one of the most loved patio furniture since how well it transforms the look of the patio and creates a nice place to relax.

    However, most of them dont come cheap. So when they start having issues like a broken rib or string, it isnt as easy as telling yourself lets just replace it.

    What if you could fix such little issues here and there by yourself?

    In this article, were going to look at a few common problems of patio umbrellas and learn how to fix them at home by ourselves.

    All the solutions will have a video tutorial attached but the step-by-step text format is for those that know the nuts and bolts of such repair mechanisms and want to save a few minutes by skipping the long videos.

    Navigate Quickly

    • A couple of nuts and bolts


  • Drill a hole in the middle of the copper tube. That means it should be located 3? inside from each end of the 6? copper tube.
  • Take both broken pieces of the rib and mark at a little less than 3 on the ends that are supposed to connect.
  • Slide the tube over the aluminum rib in a way that the end of the rib is just about visible through the hole you just drilled on the copper tube. Youll have to hammer the tube to reach that mark. This way, insert both the broken pieces into the tube.
  • Youre good to go. Its an easy yet solid fix and itll probably last all along the lifetime of the umbrella.
  • Daystar Patio Umbrella Wedge

    The Daystar Patio Umbrella Wedge is a high-quality polyurethane stopper that helps support your patio umbrella and keep it stable. The rubber is flexible and does a good job gripping the table and keeping a snug connection.

    This wedge is available in two colors: black and a dark brown. The dark brown matches pretty well to the antique bronze color so commonly seen on patio umbrella shafts.

    These tend to match the color of the umbrella shaft, as opposed to the color of the table. They cannot realistically be painted.


    • Max Umbrella Shaft Size: 1.5?
    • Max Table Hole Diameter: 2.5?
    • Min Table Hole Diameter: 1.7?
    • Works on glass or metal table tops

    The Bottom Line

    These Daystar umbrella wedges work well and are not terribly expensive.

    Some have found that it can be difficult to extract the umbrella from the table if the wedge has been in place for a while. If this happens, you can use some WD-40 and a little elbow grease to get the shaft out of the table.

    As an added advantage, they are available on Amazon Prime.

    • The Umbrella Wedge works with any table and umbrella combination
    • The Tapered Design keeps the Umbrella properly seated and eliminates any…
    • The Umbrella Wedge keeps the umbrella properly centered over the table
    • The Umbrella Wedge installs in seconds and is easily removed for storage
    • Polyurethane construction will last forever

    What Size Tube Should My Parasol Base Have

    The most common sizes for parasol poles vary from 38mm to 48mm in diameter. Generally, the tubes that attach to the top of the base of the parasol will be 40mm or 58mm. Make sure you  correctly measure the parasols pole and that the base tube is the correct diameter for the pole when purchasing. After installing the parasol into the base tube, dont forget to tighten the screw at the base to make sure that the parasol remains fixed.A parasol base must be easy to assemble and always hold tight around the pole of the umbrella.

    The Patio Umbrella Cone: Keep Your Umbrella Stable

    Patio umbrella poles are usually a good deal smaller than the opening supplied in a patio table. This difference means that it is easy to insert the umbrella into the table, but it also means that there is often a large gap between the shaft and the table. This opening can cause the umbrella to lean awkwardly, to rub against the table edge, to make annoying noises, and can scratch the finish off of the umbrella pole. The easiest fix for this is the patio umbrella cone!

    These clever little devices fit around your patio umbrella shaft and create a solid, snug connection between the patio table and the umbrella.

    This article looks closely at the patio umbrella cone and reviews a few different brands of these clever little devices.


  • 5.3 MYARD Patio Umbrella Wedge
  • Choose The Right Base

    If you dont want to go through the hassle of tightening the nut again and again, you might want to opt for a better, more secure base. The base in which the umbrella is secured is perhaps the single most important component of the entire structure as it offers support for the entire umbrella.

    When looking to buy a base for your umbrella, you need to make sure that you buy one that is heavy and has an appropriately sized hole. This will ensure that the umbrella remains firmly fixed in place despite the heavy winds.

    The sheer force and the pressure applied by the outdoor elements can uproot the whole umbrella if you are not careful. In most cases, manufacturers that make bases also offer complementary umbrella models that will go well with their base.

    If you are looking for an umbrella and dont know which one to go for, just choose the one that the manufacturer recommends. The only downside to this is that it wont come with an additional set of weights.

    Why Do Patio Umbrellas Blow Over

    For most people, sitting outside under a patio umbrella when the wind is blowing hard is not what they are after. There are a number of Patio Umbrellas that have been tested in wind tunnels that show they are capable of withstanding 100Km/hr winds, when still up! For most of us, this is of limited benefit, as I have no intention of sitting outside in such conditions.

    The main reason people are frustrated with there umbrella blowing over is when it happens due to an unexpected gust of wind, not when it is blowing a regular hurricane.

    How To Prevent A Patio Umbrella From Spinning Or Falling

    30¬∑Homemade Tactics To Stop The Incessant Spinning. There are a few other things you can try if you need a solution quickly. The Popsicle Stick Method. Sometimes a thumbscrew on an umbrella stand has a hard time creating enough friction on the smooth umbrella pole to keep it from spinning. There√Ęs an easy fix.

    Get price

    Purchase A Quality Base With A Thumbscrew

    Chances are you already have a base. Or maybe your base is old, or the thumbscrew no longer works to keep the umbrella from spinning. Unfortunately, this does happen. Still, the best way to keep your umbrella from spinning is a solid base designed to fit your umbrella pole with a heavy-duty thumbscrew.

    One I really like is the . Not only does it look great it fits umbrellas with multiple pole sizes including 1 3/8? and 1 1/2?. Plus the heavy duty screw keeps your umbrella secure and free from spinning.

    Add Extra Weight To The Base For Stability And Balance

    How To Keep Patio Umbrella From Falling Over & Spinning

    Its good if you already have a heavyweight base according to the size of the canopy. However, you can provide greater stability to the base for proper balance and protection by adding some extra weight.

    • Stack Wet Sandbags

    Putting some sandbags at the base surrounding the umbrella stand from all sides is a cost-effective idea to provide greater weight and support to the base. If you are using wet sand in heavy-duty bags, it will add even more weight so it is a much better option.

    • Place Lead Boxes Around the Base

    Lead boxes are much smaller than the sandbags and heavy too. You can place some tube-shaped lead boxes around the umbrella base.

    • Use Colorful Gravel to Add Weight and Beauty

    If you are proud of the patio ambiance of your place, this is a convenient way to secure your umbrella without spoiling the look. Place the pole of your umbrella in a bucket filled with vibrant gravels.

    • Use Supplemental Weight Bags for Large Umbrellas

    If your umbrella is 9 inches or more, you can use supplemental weight bags around the base to add up to 100lbs of additional weight.

    • Place Umbrella Pole into Cinder Block

    You can first construct a cinder block. Firmly place it under the base and put the pole of your umbrella into the hole of the block.

    • Put Sand in Hollow Bases

    Some base models have hollow chambers to fill some extra weight for support. Instead of water or other light materials, put wet sand in these chambers to put more weight.

    • Thread the Holes on the Base

    Why Do Patio Umbrellas Spin

    The most common reason that a patio umbrellas spins is because the hole in the table that the pole goes into is too big. This gap between the table and the shaft means that the umbrella will lean at an angle on the patio table, rubbing the table, scratching the finish off, or even making annoying noises.

    Be Particular About The Rib Material

    The cyclonic weather can severely damage your entire umbrella. Hence, having a strong heavy base is not enough. The strength of the wind can still cause hazards to the canopy.

    When buying an umbrella, check the ribs material. Often people get frenzied over the wooden ribs that match their wooden patio furniture. Unfortunately, the wooden ribs are not dense or sturdy enough to bear the pressure exerted by the devastating storms.

    If you are looking for durability, go for flexible fiberglass ribs and frames. Fiberglass is strong yet flexible rib material to ensure greater longevity. They are at least four times stronger compared to other ribs materials. Even aluminum ribs are stronger than wooden ribs.

    Umbrellas As Big As A Sail

    When you consider the size of some of the Patio Umbrellas it really isnt a surprise that they blow over. They are much bigger than most kites and when you compare them to the sail on a boat you can see how much power they can generate.

    The top speed of a laser sailing dinghy with a single sail area of 76ft2 that can take a 130lbs boat with a 170lbs skipper , totaling 300lbs at over 15mph !

    Thats a sail area smaller than a round, 10ft diameter, umbrella!

    Obviously one is finely tuned aerodynamically to catch the wind and the other designed to withstand it but you shouldnt underestimate the task involved.

    Parasol Bases For Small Or Narrow Places:

    The newest invention in portable base design is the Plinthit portable base. The adjustable plastic frame, dark grey in colour, can be fixed with plastic lined, Teflon-coated olefin bags that can be filled with sand to create 2 x 25kg base weights. This great design of base makes it possible to safely secure your parasol in small and narrow places like your balcony, close to your sun chair or perhaps near the table-legs.These design benefits make the Plinthit base an ideal option, reducing shipping costs and providing an eco-friendly solution to securing your parasol. Fully recyclable and free of harmful chemicals, these portable weights even provide a comfortable resting place for your pet cat or dog!Shade Specialists have delivered tens of thousands of high-quality durable parasols and bases for parasols to hundreds of satisfied customers throughout the world.

    The Popsicle Stick Method

    Sometimes a thumbscrew on an umbrella stand has a hard time creating enough friction on the smooth umbrella pole to keep it from spinning. Theres an easy fix. All you have to do is loosen the screw a little bit, get a popsicle stick, and insert the stick between the screw and the pole. Then, tighten the screw again. What this does is creates the friction needed to keep the umbrella from spinning. Dont have a popsicle stick? A similar piece of wood will work.

    How Much Base Weight Do You Need For Your Umbrella

    A good rule of thumb to follow to determine how much weight you need at the base is to add ten pounds for every foot in diameter. So, if your umbrella is 6 feet in diameter, youll want at least 60 pounds to keep it weighed down. If its a 10-foot umbrella, 100 pounds will do the trick.

    If you have a heavy base and the umbrella is in the middle of a table, you can approximate the weight of the base plus the table. Plus, if youre planning on placing the umbrella in a table, it shouldnt fall over anyway.


    Most Popular