Building A Pergola Attached To The House
Installing pergola crossbeams
After these preliminary steps, you have to build the shade elements from 2×6 slats and install them into position. Place the shade elements every 15 or more, according to how much light you want to get through the pergola.
Building a pergolla attached to house
Another way of setting the shade elements into position is to cut several notches, as in the image. Use a jig saw to make the notches, or perform several cuts with a circular saw and remove the excess material.
Afterwards, you should drive pilot holes through the top of the shade elements into the support beams, and insert the appropriate screws. Place the shade elements equally spaced for a neat look.
Attached to house pergola
If you want to add a personal touch to your attached pergola, you could install several 2×2 or 2×4 slats, perpendicularly on the cross breams. On one hand, they will add character to your pergola, but on the other hand, they would also keep the shade elements equally spaced.
Dont forget to use a spirit level every time you install a new element, otherwise the final result might not raise to your expectations.
How to build a pergola attached to house
After you have built the pergola attached to your house, you have to fill the gaps with wood putty and sand the surface with medium grit sandpaper. Work with good judgement, if you want to obtain a professional result.
Most Common Ways To Attach A Patio Roof To An Existing House
Attaching a patio roof entails intermediate carpentry skills and creativity because there are many ways that you can choose from.
All of them have their own advantages and drawbacks. When installed correctly, the patio roof will complement the house and provide an extra entertainment for you and your family for all year round.
Here are 7 different ways of attaching a patio roof to an existing house that you can apply.
Small Raised Pergola With Post And Beam Structure Attached To Roof
This is an example of a small yet trendy house. This tiny house is perfectly painted in dark brown color. No information about the paint used, but it seems that Chocolate Sundae from Benjamin Moore is pretty close.
This all-brown house is also combined with a weathered brick wall and dark-trimmed window as an accent.
The pergola is small and built on top of a raised decking. The pergola is made out of light tonewood, both the flooring and the structure. It looks perfect in contrast with the dark brown siding. Even the furniture pieces were also carefully picked to match the main color of the pergola.
What makes it unique is, the beam structure of the pergola is built to mimic the gable roof of the main house. Both are connected.
This attached pergola, however, doesnt have a cover. But it looks perfectly shade due to the towering trees in the front yard of the house and the vines and foliages around the pergola.
To Attach A Pergola Or Not Pros/cons
Should a pergola be attached to your house? This is a question that many homeowners have asked themselves. There are benefits and drawbacks to attaching the pergola to the house, so its important for you make an informed decision about whether or not this is something you want in your backyard!
A pergola that is anchored close and connected has a greater chance of withstanding strong winds or heavy snowfall due its proximity, which makes it more livable for homeowners who live in areas where these conditions occur often during certain times each year!
Benefits Attaching Pergola To House Fascia Garden Landscap
An attached pergola is great for bridging your indoor and outdoor living spaces. All you have to do is walk outside and enjoy. With a freestanding pergola, you have a lot of creative freedom. You can create a completely separate outdoor space, maximizing your yard. Freestanding pergola walls are also great for growing flowers and vines Rivet all joints, including the connection with the outlet. Install two U-shaped downspout brackets on the corner of the house, one high and one low. Bring the downspout to within 1 ft. of the ground and install the last elbow. Finally trim a notch in one end of a 36-in. length of downspout to make a fold-up extension Evaluate and Plan the Gutter Replacement Project. DIY gutter replacement can save you substantially over professionally installed gutters, but there are a few pitfalls to watch out for. Inspect the fascia and soffit for signs of rotted wood, which must be replaced before you put up the rain gutters.Many houses have a trim board or crown molding nailed to the fascia just under.
Recommended Reading: How To Keep Stray Cats Off Patio Furniture
Mounting The Patio Roof Ledger
Procedures for mounting a ledger depend on the type of siding on the house. Relatively flat siding can remain intact, but clapboard, beveled wood, metal, or vinyl siding should always be cut away.
If you have beveled horizontal siding, then use an inverted piece of siding, as shown in the illustration here, to create a plumb, flat surface for attaching the ledger.
If your siding is not beveled, you can simply screw the ledger tightly to it.
Remove enough of the siding so you can tuck flashing behind the siding above the ledger and allow it to overhang the siding below the ledger.
When cutting wood siding, adjust the blade of the circular saw so it cuts just the siding and not the sheathing underneath. Also, do not let the blade cut beyond the layout lines. If you are cutting vinyl siding, you can use a sharp utility knife instead.
A ledger should be affixed to strong parts of the houses framing, such as second-floor joists or wall studs. The strongest ledger connection relies on bolts that run through the ledger and the house sheathing and rim or band joist and then are fastened with nuts and washers affixed from the other side. When access to the other side is unfeasible, use lag screws with washers instead of bolts, as shown in the illustration.
If it is impossible to attach the ledger to a floor joist, then fasten the ledger to wall studs, which are generally located on 16-inch centers and doubled up around doors, windows, and other openings.
How To Hang A Pergola Ledger Around A Gutter
Verify that the ledges is hanging straight on the brackets by using a level.
Hanging the ledger for a pergola structure on the exterior of a house is typically done by bolting it onto the exterior wall. However, if a gutter is located at the same level as the ledger for the pergola, you will need to use a different method. To hang a pergola ledger around a gutter you need to attach it to a bracket that is mounted on the wall behind the gutter.
Count the number of lag screws that are used to secure the gutter to the exterior wall.
Measure six inches of the 1/2-inch PVC pipe with the tape measure. Make a cut mark with the felt tip marker. Cut the PVC pipe with the hacksaw. Repeat this step for the number of lag screws that you counted in step 1.
Remove one of the lag screws with the power drill. Place a Simpson ABU66 post base in-between the back of the gutter and the fascia board.
Insert the lag screw into the hole in the post base and the front of the gutter. Place a 6-inch length of the PVC pipe over the hole on the backside of the gutter. Slide lag screw into the PVC pipe. Secure the lag screw to the exterior wall with the power drill.
Repeat steps 3 and 4 to install a Simpson ABU66 post base where each lag screw is located.
Set the ledger for the pergola in place on the side of the post base. Mark the bolt hole locations on the ledger with a pencil. Drill a hole for the bolt with the power drill.
You May Like: How To Build A Deck Over A Concrete Patio
Wood Attached Pergola With Polycarbonate Roof
This is an example of a traditional pergola situated in the backyard. This pergola is installed on top of a deck area. Thus, it features some stepping stairs with a wrought iron railing to border the pergola.
This is a covered pergola with polycarbonate on top of the beams to shield the area from any weather. The post and beam structure is a stained cedar that looks nice combined with the red brick wall.
This attached pergola is installed right in front of the house, so it can be used as a front porch too. There is a seating area that can be used by homeowners to enjoy the outdoors without being bothered by the weather, thanks to the cover.
Spacious Pergola Attached To A Shingle Roof
This pergola seems like a covered front porch because it is installed right next to the main property, and it is attached to the roof.
The width of this pergola is similar to the width of the houses side, so it can be considered as a large pergola.
The exterior of this house is in the Craftsman style. The designer decided to blend tile, wood, and stone in a natural color palette.
The pergola itself features an exposed structure made out of what seems like cypress or cedarwood. It is floored with wood-like tile to match the post and beam.
The pergola is situated on top of a steep slope, so it is supported by a retaining wall made out of natural stone.
Sitting in this pergola would be comfortable since it is fully covered. It seems that the beam is covered with polycarbonate.
The structure of this pergola is attached to a shingle roof of the main property. The stained wood of this pergola blends seamlessly with the siding in the shingle roof.
Moreover, it also looks nice combined with the green siding of the house. There is no information about the green paint used, but you can try Hunter Green from Benjamin Moore.
Recommended Reading: Building Decking On Concrete
Designing A Pergola That Attaches To A House
When designing a pergola that is attached to a house
Its critical that you know what youre doing or hire a qualified contractor to help.
Some homes will have the proper structure to support one side of the pergola.
While other homes may need the pergola to support itself.
On its own columns.
Some pergola installations require new footings.
Or pillars to fit the surroundings.
And some pergola designs require accommodation.
For roof lines and gutters.
Heres an example of a pergola built adjacent to a covered patio.
The finished build looks great.
And complements the existing structure of the home.
These are all great reasons
To enlist the services of an experienced pergola builder.
The Purpose Of A Pergola
A pergola is an open structure that can be freestanding or attached to a home. They provide shade and protection from harmful UV rays, while also giving climbing plants something on which to grow.
The word pergola has origins in Late Latin, meaning a projecting eave. It was mentioned in an Italian context by John Evelyn at the cloister of Trinità dei Monti when he used it to describe a hunting pergola built on Salisbury Downs for that purpose.
While they do not provide full shade on their own as stand-alone structures, pergolas versatile design allows many options when it comes to shading in your outdoor area. If you desire total coverage during those hot summer days or want protection from pesky insects that may be around at any time of day than consider adding an optional retractable canopy which can give you partial covering if desired and different levels depending on where the Sun is located throughout certain times of the day!
You May Like: What Is The Width Of A Standard Patio Door
Raise The Roof By 500 Millimeters
You can raise the patio roof up to 500 millimeters by removing the eaves, fascia, and gutter. After that, cut the rafters back to the wall line.
The back channel is connected to the rafter directly and reinforced. By doing this method, you will have a clean finish that is connected to the wall line.
But, you may also need to install transfer flashings on top to complete the look.
Flashing A Patio Roof Ledger
Unless it will be protected from rain by the houses eaves or a solid roof, a roof ledger that is fastened directly to a house with wood siding should be capped with galvanized metal Z-flashing that tucks up under siding to prevent water from seeping in behind it.
Where integral flashing isnt possible, such as on a stucco wall, use Z-flashing and caulk the top edge. This is a job you must do before fastening the overheads roof rafters in place.
You can buy L- or Z-shaped flashing or bend it yourself. To bend sheet-metal flashing, make a form by clamping two 2 by 4s together on each side of the metal, and then hammer the metal to create a sharp edge at each fold.
Fit the flashing in place, caulk the top edge, and nail it with galvanized nails long enough to penetrate at least 1 inch into the structural members. Then caulk the nail heads.
If the house is sided with shingles or lap siding, simply slip the metals top edge up under the bottom edge of the shingles or siding as far as possible.
Don’t Miss: How To Clean Black Mold Off Concrete Patio
Risks With Attaching Verandahs Or Carports To Your House
In recent years, the size of attached roofs has grown substantially and spans of six metres or more are now common. As well as covering double car spaces under carports, they now cover very large outdoor entertaining and living areas. This increase in size can more than double the loads now being placed on fascias and eaves. Coupled with this are changes to the way roofs and eaves are framed for the house itself. Prefabricated timber and steel roof trusses are frequently used for the roof framing of the house and fascias are often made of thin metal with limited ability to act as distributing beams. It should not be assumed that the existing timber or steel structures can support additional loads such as carports or verandahs. The attachment of a carport or verandah to an existing roof structure may void the structural warranty of the existing structure and may compromise the structural integrity of the existing structure.
Where a Class 10 building is to be attached to any part of the roof framing of a building of another Class , the adequacy of the existing structure to support the additional roof load width must be verified.
Absorbing Video Footage Attaching Pergola To House Fascia:
How To Build A Pergola Frame – DIY At Bunnings
This video from Bunnings Warehouse will show you how to put up a sturdy pergola, from digging the holes, to framing the structure and installing the rafters.
How to connect your pergola to your home
Attached Pergola Designs | How To Build Attached Pergola Design
Attached Pergola Designs, Pergola Designs Attached To House, Attached Pergola Plans, Attached Pergola Plans Free Download, Attached Pergola Plans Free, …
Also Check: How To Make A Paver Patio On A Slope
What To Know Before Attaching Pergola To Roof
You’ll most likely have a different situation. Build a pergola over an existing patio saves you a lot of time, money and work. If you’ll be adding a patio later, be sure to pour all the footings at the finished patio height as part of your pergola designs. Keep in mind any slope you’ll include in the patio Because you don’t have an eave on your roof to attach anything to, I recommend for good clearance in the door area building the pergola slightly higher that the mobile home and several inches away for clearance. If you are just putting stringers across the top, then attaching to the roof with a sealant is worthless Gutters vs. No Gutters. Here is what you need to know. First of all, not all homes need a gutter system. If you live in an arid climate and don’t experience periods of heavy rain, then it might not be necessary. But most homes do need a good rain gutter system to collect the storm water that lands on the roof and direct it away from the house. Make sure that you maintain the integrity of the roof as you install your gutters. Do It Yourself suggests that metal strapping is a bad idea, stating: not only does the weight of the gutter on the strapping cause potential damage to the bottom edge of your metal roof, but you also have the issue of different metal types rubbing together
Attach A Pergola Ledger Over A Window
This is where we need to get creative! ;
We’re going to have two shorter ledger boards each side of the window. These are going to support the side rafters, which, in this case, are the main support rafters. ;The raised rafters, running from front to back, are going to sit on these.
Often, the length of the beam span, from one outside post to the other, is too long. ;Many people, who want to build their own attached pergola, contact me to ask if they can have a span of anything between 15ft – 25ft without extra support posts. ;It’s the desire to have the uninterrupted view which is so enticing, and I fully understand. However, it is more than likely that, over time, the main supporting rafter will sag, especially if there is the added weight of a vigorous climber. ;It’s definitely better to err on the side of caution.
If we take a look at the 2D diagram, we can see the two extra inside side rafters running from the ledgerboard to the inside posts. ;These give strength to the structure, making it much more stable and able to take greater weight. ;An added bonus is that the 8ft space in the centre gives an uninterrupted view through the window.;;;;
Recommended Reading: Paint Wrought Iron Furniture