How To Build A Patio On Uneven Ground

It Also Works If You Are Using Stone Or Concrete Pavers Materials

Technically, it is not really difficult to build a brick patio on yourself, as long as you are willing to devote energy and time to it.

You have to haul tons of brick, stone, gravel, and sands in order to get this project done.

it may take you two or three weeks to finish with a small group of helpers and even longer if you do it yourself.

MoreHow to Make a Brick Patio on Uneven Ground for All Country Including USA, Europe, Australia, Asia, Middle East Best Home Furniture.

How To Lay Flag Stone On Uneven Ground

21 September, 2017

Flagstone is a term for any large flat stone, either cut from a quarry or found naturally. Flagstones may be a variety of rock including sandstone, limestone, quartz and granite and come in many colors. Natural stones, created by the fracturing of rock layers, are irregular in size and shape and usually have irregular surfaces. Quarried stones are cut from thick layers of rock and are more uniform in size and shape. Either style can be used for patios, walkways or other paved surfaces around a house. Flagstones can be set in mortar or concrete or laid on sand.

Choose the area for flagstone installation. The ground does not have to be level, although patios and similar surfaces need to be smooth. Decide whether to lay flagstones as a solid surface or as individual stones, with varying gaps between them. Base this decision on the type of stone natural stones are irregular and lend themselves to individual installation. Use either style for walkways or patios and sitting areas quarried stones are easier to fit into formal spaces like squares and rectangles.

• Choose the area for flagstone installation.
• Base this decision on the type of stone natural stones are irregular and lend themselves to individual installation.

• Make a solid stone walkway on uneven ground using stair steps.
• Set 2-by-4-inch boards on edge across the pathway at step intervals, fill the area with sand, smooth it with a board.

Related Articles

Writer Bio

Optional Step : Install Extra Bond Beams

Concrete bond beams are typically installed on the outer perimeter where the pavers abut up against any soft-scape surfaces such as grass, gravel, dirt, etc. and its purpose is to inhibit the pavers from moving laterally. For added assurance, you can include/insert a concrete bond beam every 10-15 feet. What this does is add another layer of support and essentially locks down and/or contains the pavers within each 10-15 foot span which disperses the pressure/load.

Also Check: How To Build A Patio Storage Box

How To Install A Paver Patio On Uneven Grounds

Homeowners enjoy the great look that patio paving provides for their lawn. It creates a narrow path, and people want to see what the result may be. But uneven ground can derail the paving effort right from the start. Use a few simple tactics to lay down the patio paving stones on that uneven ground. That will explain how patio paving can take place on the lawn as well. The patio paving stones can then be laid in to place without any hassle. Uneven ground can be managed in a short amount of time. There are unique advantages people will want to consider.

Preparations For Building A Patio On A Slope

• Written by Laura Bloomfield on Jan 03, 2011To ensure our content is always up-to-date with current information, best practices, and professional advice, articles are routinely reviewed by industry experts with years of hands-on experience.Reviewed by

Building a patio is an easy home improvement project. Building one on a slope is made possible by building a level base. It may seem like a daunting task, however, it can be done in just a few simple steps. Here are the steps you will need to follow in order to level the area.

Step 1 – Preparing for the Construction

Before you begin, be sure to check the weather forecast. You will a need a couple of days of good weather to prepare the area for the patio installation, this is more crucial if you use mortar in the retaining wall installation process. Also, be sure you have all of the necessary tools before you begin. This project will go much faster if you have everything you need before you begin and do not have to stop working to locate needed equipment.

Step 2 – Excavating the Area

Use a spade and shovel to excavate six inches into the soil. Begin digging out the soil at the lowest part of the slope. You will need to dig more soil from the highest part of the slope so that the entire area will be level. Use a level to ensure that the area is flat and even.

Step 3 – Building a Retaining Wall

Step 4 – Laying the Sand

Also Check: How To Clean Bird Poop Off Patio

Additional Details To Avoid Cracked Tile

As with wood floors, the best way to avoid cracks is to install an anti-fracture membrane. Isolation and uncoupling membranes work, as do liquid-applied coatings or synthetic fabrics for use over concrete. Some additional details to consider:

Before using a liquid-applied or peel-and-stick membrane, let relative humidity drop below the required percentage as specified by the manufacturer, typically around 80 to 90 percent. This usually takes about 28 days and can be confirmed by drilling a hole in the slab and inserting a moisture probe per ASTM F2170.

With a liquid-applied membrane, thickness correlates directly to quality, so its a good idea to have quality assurance procedures in place that ensure that the membrane is applied at the recommended thickness.

Dead spots under tile sound hollow when walked on and could signal that moisture coming up from the slab is causing the thinset mortar to release. An under-slab vapor barrier and a membrane between the slab and tile should prevent this.

When installing anti-fracture membrane over a slab, use a continuous membrane instead of just treating control joints in the slab.

Where tile meets a wall or other floor material, leave space for expansion and finish it with a shoe mold or baseboard.

Richard Baker is program manager of the Builder Solutions Team at IBACOS.

How To Fix Cracks In Concrete

Small holes and cracks in a concrete can be repaired by yourself or a professional. Cracks can exist in varied diameters and depth. The type of patch compound to use will depend on the size of the crack.

Wider cracks are best sealed with a concrete patching compound such as mortar mix while smaller ones with a liquid concrete filler.

In your preparation for fixing a cracked concrete, you will need to have tools like hammer, chisel, wire brush, putty knife or trowel and a protective gear. Proceed to repair the crack in concrete as follows:

Don’t Miss: How To Make A Patio On Grass

What Kind Of Diy Projects Are You Contemplating Do You Have A Tip Or Trick You Would Like To Share We Would Love To Hear It

on August 17, 2019:

did I miss somewhere in the article, but what size did this How to Build an Elevated Deck on Uneven Ground end up being?

Scott on June 08, 2019:

Great tutorial. Do you think it would add too much weight to put 2x4s over the ply to get the traditional look? SIDE NOTE: Cat, do you feel so little about women that you think female speak is belittling? Im a man, and my girlfriend tells me all the time that women are better at explaining things. So the way I translate female speak is similar to laymans terms. But you probably dont like laymans because the word man is in it.

Diacrum on June 12, 2018:

Cat, there is nothing wrong with the way this was written. She was not belittling the female gender. Todays society is offended by EVERYTHING! Get over it!

Lisa on April 27, 2018:

Really helpful – thank you

Cat on October 16, 2017:

Sorry, “female speak” ? I’m a woman, and I know a lot more about carpentry and masonry than my boyfriend does. I don’t see the sense in belittling a gender just because you feel the need to make an excuse for not bothering to learn technical terms for the project you’re doing.

Lex on April 11, 2017:

Hello, I was wondering if you knew how much weight your platform could hold? I am looking to build something similar around an oak tree for a wedding where the dancing will be held. Thanks in advance.

Alex on August 29, 2016:

Matthew on April 23, 2015:

Rhonda Lytle from Deep in the heart of Dixie on July 30, 2014:

Concrete Cracks Caused By Overloading The Slab

Although concrete is a very strong building material, it does have its limits. Placing excessive amounts of weight on top of a concrete slab can cause cracking. When you hear a concrete mix has a strength of 2000, 3000, 4000, or 5000+ PSI, it is referring to the pounds per square inch it would take to crush that concrete slab.

When it comes to residential concrete slabs, overload of the actual slab isnt all that common. Instead, what is more likely to occur is excess overload on the ground below the slab.

After a heavy rain or snowmelt when the ground below is soft and wet, excessive weight on the slab can press the concrete down and result in cracks. Residential homeowners who place large recreational vehicles or dumpsters on their driveways are more likely to see this type of cracking.

Dont Miss: How To Replace Webbing On Patio Chairs

Don’t Miss: How To Build A Patio Storage Box

How To Level The Ground For Pavers

This article was co-authored by Scott Johnson. Scott Johnson is the Owner and Lead Design Consultant for Concrete Creations, Inc., an award-winning landscape and design company based in the San Diego, California metro area. He has over 30 years of experience in the pool and landscape construction industry and specializes in large estate outdoor environment construction projects. His work has been featured in San Diego Home & Garden Magazine and on Pool Kings TV Show. He earned a BS degree in Construction Management with an emphasis in Architecture and CAD design from Northern Arizona University.There are 7 references cited in this article, which can be found at the bottom of the page. This article has been viewed 226,436 times.

Available at most home improvement and supply stores, pavers are small, specialty stones that can transform any yard or garden into a work of art. Like all outdoor decor, pavers require some preparation to install properly, especially when it comes to making sure your ground is level. Though it may seem daunting at first, knowing the ins-and-outs of the process will help you tackle your paver project with poise.

How To Build A Deck On Uneven Concrete

How i built my floating deck on uneven ground you stair construction for uneven ground the deck mod building diy floating deck part 1 planning and layout ugly duckling house laying a wood deck on wavy slab fine homebuilding diy floating deck part 1 planning and layout ugly duckling house covering an existing concrete porch with wood part 1 addicted.

How to build a deck over concrete patio building a deck on sloped groundlearning center building a deck on sloped groundlearning center building a deck on sloped groundlearning center how to build a deck on uneven concrete mycoffeepot org decking over uneven and split level patio diynot forums.

Also Check: Webbing For Patio Chairs

How Do You Lay Pavers On Uneven Ground

4.7/5surfaceunevenpaverspaverspaverspaverspaver

First, remove the pavers using the tip of a small, flat-bladed screwdriver. Little by little, pry up the end of each paver. Sometimes employing a pair of screwdriversone at each end of the paverhelps with the wiggling process. If the pavers are wedged in tight, pound them with a rubber mallet to loosen things up.

Also, how do you build a patio on a sloped ground? Construct a stone or brick wall around the edges at the lower part of the slope. Stack the materials one layer at a time. Continue stacking the stones or bricks until your wall is the same height as the highest part of the slope. If necessary, use mortar to secure the wall.

Also, how do you lay pavers on uneven concrete?

Lay the field pavers over concrete as you would on any paver patio. Scrape away the excess sand and cut off the excess landscape fabric with a utility knife. Glue down the last border patio blocks. Let the glue dry for a few hours before you tamp the field pavers and sweep sand across the patio to fill the joints.

How do I keep my patio pavers from moving?

Prevent the pavers from shifting around by adding a solid edge to your patio. You can use a cement lip, plastic or metal edging. When you’re finished, spread fine sand over the patio and sweep it into the cracks to help hold the bricks in place. You might consider using polymeric sand for increased longevity.

Assemble The Front And Back Frames

Most people would set the post and then build onto them. My hubby wanted to be sure about the spacing being perfect so he wouldn’t have to do any extra cuts. So, he built the frames onto the posts before sinking them in the ground with concrete.

To the front and back of the first three 4′ x 4′ posts, is attached an 8′ long 2′ x 6′ pressure treated board. The attachments are done with heavy-duty bolts, washers, and nuts. The last board was cut to 4′ before being attached the same way.

You will need to drill the holes for the bolts. Be sure to use a level before attaching the boards, so everything stays good and straight.

Once the four posts were connected, the two of us picked up the entire assemblage and dropped it in the holes. Yep, it was heavy. But this deck is perfectly square with almost no cuts needed so I would do it this way again.

Tip:

Big, chunky bolts don’t break like little skinny ones.

Bolts connect front and back frame and posts.

You May Like: Decking Over Concrete

Can Cracks Be Stopped

There are a few ways to stop or limit cracks. One is to place rebar into the concrete. Like most builders, we do this. Granted, it doesnt prevent all cracks. We place rebar in several strategic locations to keep the concrete from settling and pulling away from places it needs to be. It also helps lend strength to the slab.

Also, concrete poured in the middle of the summer is going to have more cracks than concrete poured when it is colder. Why? Well, lets think about it. What does the hot Sun usually do to water? It evaporates it quickly. So during the Summer, your concrete dries out faster, producing more cracks. So if concrete is poured in the cooler months, assuming its placed on a good base, it will have fewer and smaller cracks.

There are other ways of avoiding cracks or keeping them to a minimum, but they start getting very pricy. The cheapest of these pricy options is to fill the whole slab with steal mesh. This will still allow cracks to occur, because the concrete is shrinking around all this mesh, and the mesh might not be shrinking with it. The idea though, is that the mesh will keep the concrete from settling or from separating too badly. We do not install mesh, because its a high cost additive that doesnt fully stop cracks from occurring. And since we pour your floor on compacted fill, were not worried about settling issues.

Naturally, this is overkill for most homes.