Friday, June 21, 2024
HomeBuildHow To Build A Wood Patio Cover

How To Build A Wood Patio Cover

Freestanding Metal Roofing Patio Cover

How to Demo and Build a Insulated Elitewood Patio Cover in One Day

The aim of building a freestanding patio cover is to protect you from the rain and the glare of the sun. Therefore, you can use any materials for the roof including the tin roof.

Tin roof, just like any other metal roofs, has many benefits. Tin roofs are more durable than wooden and plastic roofs. They are also lighter which makes them easier to install. They are also resistant to fire.

This patio features a very simple structure and there is nothing wrong with that. The simple structure tends to be practical rather than aesthetical.

The black metal posts and beams are sturdy enough to support the tin roof. To get a cooler breeze, a fan hangs over the table.

Grow A Living Shade Canopy

Vines such as grape and climbing roses growing on a simple structure can make a lush and beautiful living shade canopy.

20+ favorite easy to grow flowering vines for the garden!

You can support vines with trellises made from wood or metal, or simple pergola kits.

12 DIY living structures you can create!

Buy A Shade Sail Or Shade Cloth

A shade cloth is a stretched piece of fabric that hangs above a patio, any type of patio.

A shade sail is the same thing, except shaped like a sail rather than a square. This might sound like the retractable covers youve seen, but they are, in fact, completely different.

Since shade cloths are stretched across, they look more sophisticated and design-oriented. You can place them almost anywhere.

All you have to do is create three or four spots to mount the cloth from, depending on the shape of the cloth. You can do this by embedding poles into the ground or by attaching hooks to an already existing cover.

Shade cloths are very inexpensive; they go for $30 to $40 on Amazon and are just as cheap at some hardware stores, like Lowes.

You May Like: How To Clean Outdoor Cushions With Mold

Louvered Patio Cover Cost

The cost of a louvered patio cover is between $4,320 and $20,700. This makes the total cost of a patio with a louvered roof between $6,048 and $26,100. Louvered roofs come in many configurations and materials. A roll-formed roof is the least expensive. This is a thinner type of slat material. An extruded roof is the most expensive. This is a more durable and longer-lasting roof option, but costs can approach $100 a square foot if you choose to include all the options.

Attractive Shade Structures With Natural And Free Materials

How to Build a DIY Covered Patio

Indigenous people all around the world have created shade structures from local native plant materials such as twigs, branches, bamboo, palm leaves, etc.

This woven twig or bamboo panel supported by cables looks so charming on an old farmhouse in Spain.

In traditional buildings of the American southwest like this example above, a layer of smaller branches or saplings known as latillas or Latias covers the top of the Vigas .;

This timeless design looks beautiful in both modern and traditional gardens. Here is a modern patio with shade pergola.

Another beautiful patio shade cover idea in a traditional Mediterranean farmhouse style via Lanacion.

You May Like: How To Build A Rectangular Gazebo

Classic Freestanding Patio Cover

The classic look is timeless. The wooden posts denote the classic touch to the patio. And the shingle roof sits perfectly on the exposed beam ceiling. A fan hangs above the black ottoman that has the same color as the roof.

Although this patio is not too spacious, it is still cozy enough to spend your spare time while slurping some tea in the afternoon and enjoying the spectacular landscape.

The Main Factors That Influence Patio Cover Costs

The main factors that influence the cost of a patio cover are the materials cost, the cost of labor, and any unique design features.

According to HomeAdvisor, as of 2021 the cost range of patio covers was between $2,900 and $40,000, with $16,567 being the national average cost of a new patio cover. The total average cost per square footwas between $22 to $75.; The cost of labor typically accounts for the majority of that price, with materials making up most of the remainder.

Its important to note, however, that prices here in the Puget Sound area can vary quite a bit from the national average.; Depending on your specific neighborhood, property landscape, and local permitting costs the cost can vary even more.; In the Greater Seattle area the average cost per square foot for a patio cover was closer to $40 to $200 per square foot.

Thats why its best to get a consultation from a local, professional patio builder builder like Timberline, in order to get a more accurate estimate of your costs.; We offer free in-home estimates on our projects so you can be clear about how much your patio cover will cost, without any hidden or unexpected costs.

Don’t Miss: How To Keep Patio Cushions From Blowing Away

Cost To Build An Awning Over A Patio

The cost to install an awning over a patio ranges from $100 to $25,000. This makes the total average cost for a 12 x 18 patio between $1,828 and $27,400. In this case, the awning and patio material and style create the wide range of costs. Awnings come in many different styles and materials. They can be simple sailcloths or motorized, retractable covers. This, combined with the many different patio material types, creates a wide range of associated costs.

How To Build Patio Cover

How to build a patio cover

The south wall of my workshop is about 31 long and borders the pool patio. Unfortunately, getting out of the sun can be a real challenge if we are hosting a lot of people since there is not a lot of covered patio space. Today Im going to do something about that. I am going to build a 6 x 31 covered sitting area and basically walk you through the steps so that you too can be empowered with the information needed to get out there and build one of your own.

Ill start by clearing up some lingo real quick. Im not sure if its a southern thing or what but I have been calling this thing an awning when talking to some of my friends on line; most of which are not from the south. Come to find out, the correct jargon is verandah..which to me, sounds a lot like a brand of womens eye shadow or something : ) Nonetheless, this thing is getting built, and as the builder, Im gonna call it an awning. : )

Things I Used In This Video:

Initially I took the time to understand exactly how I wanted the awning to attach to the building. As I saw it, I had the choice of either butting up directly to the existing building eave, going directly underneath the building eave, or tearing into the building eave and attaching to the main structure directly.

Setting the Posts

Attaching the Rafters

Roofing Yuck : )

Note: If you are repeating this project, be sure to stagger or offset the joints of the plywood on each row of plywood as seen below.

Also Check: Cleaning Bird Poop Off Wood

Step : Building The Roof For The Patio Cover


Use 2×8 lumber for the rafters. Make the 5 degree cut to one end of the rafters. In addition, mark the cut lines over the boards and make the birdsmouth cuts.


Fit the rafters to the top of the patio cover structure. Place the rafters every 16 on center. Use rafter hangers to lock the rafters to the ledger boards and rafter ties to secure it to the to plates. Insert 1 1/2 structural screws to secure the rafters into place tightly.


Use 1×4 lumber for the roof purlins. Lay the purlins to the top of the roof, staring from the bottom to the top. Align the edges flush and place the purlins every 16 on center. /insert 2 1/2 screws to lock the purlins into place tightly.


Fit the metal roof sheets to the top of the patio cover. Align the edges and then insert screws to lock the sheets to the purlins.

Veranda Planning Permission Requirements:

  • Must not be wider than the existing building.
  • The maximum depth for a single storey building must not exceed 3000mm for an attached building and 4000mm for a detached building.
  • The maximum height must not exceed 4000mm.
  • The maximum height of the eaves within 2000mm of a boundary shall not be greater than 3000mm.
  • Raised platforms must not exceed 300mm.
  • No extension in front of the main elevation or side elevation fronting ;a public highway.
  • The total area of ground covered by the veranda must not exceed 50% of the land around the original house.
  • Hopefully you now have a good idea of the size and shape of your veranda but if you want to try this yourself then youre going to need a few basic tools. Essentials will including a good drill with a mix of different size wood and masonry bits, circular saw, handsaw, jigsaw, hammer, chisel, tape measure, protractor, set square and pencil.

    Also Check: How To Build A Barbecue Grill Surround For Your Patio

    Building A Wooden Patio Cover

  • 1Measure your patio and determine how high the patio cover will be. Use a tape measure to check the length and width of the patio you want to cover. Decide if you will create a free-standing cover or if you will attach it to your home at one side. Measure the height of the edge of the roof of your home if you will attach it there.XResearch source
  • The patio cover can be any height you want if you are going to make a free-standing structure, but at least 7 ft is a good standard height. If you are going to attach it to the edge of the roof of your home, then it will need to be lower than the gutters of the homeâs roof.
  • 2Install post mounts in each corner of the patio. Get 1 post mount for each corner, such as 6×6 post mounts, from a home improvement center or hardware store. Bolt them squarely into each corner of the patio where you will install a post.XResearch source
  • Depending how big your patio cover will be, you can use smaller or larger posts. Ask at your local lumber yard what size of posts you should be using based on your patio dimensions to support the load of the cover.
  • 3Cut the corner posts to the height of the patio cover that you want. Use a saw to cut the ends of the posts off to make them the height that you determined for your patio cover. Get the posts pre-cut to the size you need at a lumber yard or home improvement center if you donât want to cut them yourself.XResearch source
  • Building A Patio Cover

    Main Matchup: Wood Patio Covers versus Aluminum Patio ...

    Overview: The new patio cover will be built using Western Red Cedar 4×6 posts, 4×6 beams, and 2×6 rafters . The roof will be constructed using Multi-Core Galvalume metal roofing. The posts will be attached to the slab using galvanized post anchors; and the rafters will be attached to the beams using various straps, ties, and joist hangers.

    Free-Standing Patio Cover Plans

    Assumptions: A concrete patio slab is already in place with footings capable of supporting the load of the new patio cover .; The footings are not shown in this example, since they vary considerably depending on your location and soil composition.

    The dimensions indicated in these drawings of the existing structure are for example only. Your existing structure will enfluence your patio cover design and make it distinctive and unique.

    Front Elevation

    Since this patio cover design has supporting posts located close to the existing structure, I tried to position the patio cover and slab, so that the posts were not located directly in front of windows and doors.

    Side Elevation

    This patio cover plan example uses galvanized metal as the roofing material. You can alternatively use shingles as roofing material, providing the roof pitch on your patio cover falls within the shingle manufacturer’s specifications. This patio cover on provides an example of a shingle roof design.

    Roof Framing PlanRoof Plan – Top RightRoof Plan – Front RightBuilding a Patio Cover – Brace Detail

    What next?

    Also Check: Decking Over Concrete

    Wooden Freestanding Patio Cover On Budget

    Lounging by the pool is really nice. But it is not that nice if the sun is too hot or the rain comes. Thus, you need a freestanding patio cover to sit back and enjoy the view of your backyard despite the weather.

    This wooden patio cover is such a great idea for those who want to salt away some money. It does not feature any sophisticated pattern, even the posts are just simple.

    The only curvy edges are found in the joist beams which are not too complicated yet accentuate the cover very well.

    The patio features two wire chairs and a swinging bed. It will be nice to lounge on the swinging bed while reading your favorite book.

    And the most important thing is you can get all these wonderful things at an affordable price. Being comfy does not have to be expensive, does it?

    Shipping Is Free Across The Contiguous United States

    Even though these are tough, durable, solid timbers, every effort is made to protect the kit through every step, from beginning to completion.

    A great semi truck driver pulling out with a new timber frame ShadeScape kit to another do-it-yourself person helping to build a more beautiful America!

    With a ShadeScape Timber Kit You Can Easily Build Your Own Patio Cover!

    Before I found them, I was going to have one self built. But when I found them it was kind of a no brainer to have them manufacture it. Because I wanted something heavy. Rather than the light little you know 2×4 or 2×6 construction. I wanted something that was heavy and sturdy and looked proportional.;Lindsay Andrus UT

    Read Also: How To Build A Hip Roof Patio Cover

    Freestanding Patio Cover With Traditional Accent

    This patio provides a bit traditional accent to your backyard. It is like the ones that you can encounter in Bali.

    The stained wooden posts give a more natural and impressive look to the patio. The exposed beam ceiling makes the patio look more attractive although it does not feature sophisticated patterns.

    The black roof shingle plays an important role in creating the traditional ambiance. It suits the chairs perfectly.

    Since the roof slopes down from the center, it does not accumulate water, snow, and leaves which makes it easier to clean.

    Building The Base Of The Pergola

    Build Update: Installing A Wood Patio Cover || Dr Decks


    Use 6×8 lumber for the top plates. Use temporarily braces to lock the posts into place tightly, while you assemble the frame for the patio cover. Set the beams into place and use post to beam connectors to lock everything tightly.


    We need to add 6×6 braces to the frame of the patio cover. These braces will also help you against lateral movements. Make 45 degree cuts to both ends of the braces and then secure them into place tightly. Drill pilot holes through the braces and insert 5 1/2 screws to lock them into place tightly. Use at least 2 screws for each joint.

    Read Also: Cleaning Mildew From Outdoor Cushions

    Glass Patio Cover Cost

    The average cost of a glass patio cover is between $25 and $45 a square foot installed. Glass patio covers give your patio a very contemporary appearance. They offer a solid cover, which keeps off the rain. However, unless the glass is tinted or shaded somehow, it does not offer much protection from the sun. Glass roofs also heat up the patio below very quickly, so they work better in cooler climates. Several different glass types can be used this way, but using panels is the most common method.

    Fastening To Masonry Walls

    Anchor a ledger to a masonry wall with expanding anchor bolts. Begin by marking a line across the wall for the ledgers top edge. Drill holes for the expanding anchors every 16 inches or as specified by local codes, insert the anchors, hold the ledger in place, and tap it with a hammer to indent the anchor locations on its back face.

    Remove the ledger, and drill bolt holes where the bolt tips have left marks. Push or hammer the ledger back onto the bolts, recheck for level , add washers and nuts, and then tighten the bolts.

    You May Like: How To Remove Mildew From Patio Furniture Cushions

    Finishing The Diy Veranda

    This takes us up to the finished DIY veranda project. ;Now all we need is some nice decking and furniture to enjoy our new outdoor space and maybe an electric patio heater for cooler afternoons to comfortably enjoy a cup of tea!; But thats for another time. ;Please feel free to comment below and share your experiences.

    . ;Ive recently added some decking and guttering which cost an additional £450. ;Its also had a lick of paint. .

    If youre not up for the challenge then why not consider one of these alternatives:

    Before and after pictures for this DIY veranda. Read about the DIY decking here.

    As you can see weve recently renewed the patio.; Read all about this DIY porcelain patio here. The DIY veranda, decking and patio make the perfect combination.

    Update August 2020.; Ive recently added a reclaimed wood boardwalk and another decking area to the garden to tidy things up.

    Patio Cover Materials List

    Wooden Patio Covers Design  HomesFeed

    Once you have a plan for your patio cover that has been approved and that you are happy with, the next step is making a comprehensive list of all the materials youll need. Many of the design software options will do a list automatically, but assuming that you did the drawing by hand, lets make the list longhand. As with the design phase, it makes sense to work in a logical pattern to make the list. For consistency lets start with the supports and work up.


    Don’t Miss: How To Install Sliding Screen Door Bug Seal


    Most Popular