Thursday, December 8, 2022
HomeBuildHow To Clean Concrete Patio Of Mold

How To Clean Concrete Patio Of Mold

Apply An Acrylic Sealer

HOW TO CLEAN CONCRETE WITH NO PRESSURE WASHER (Back Patio Soft Wash W/ Chemical Mix)

Applying an acrylic sealer on concrete is an excellent way to protect driveways and patios for years to come. It sticks to the surface as a protective layer that prevents mold spores and water from penetrating the pores, thereby keeping it free from mold, mildew, algae, and moss.

KILZ L390201 Interior/Exterior Concrete, Brick, and Tile Liquid Masonry Sealer

A high-quality concrete, brick, and tile masonry sealer brought to you by the leading mold-resistant paint company KILZ.

Just one coat on your patio or driveway will protect it from mold, mildew, and stains for years without fading the colors.


The product can be applied on clean surfaces that are free of dust and mold through a pump sprayer, brush or roller, and dries within an hour. Also, one gallon of this concrete acrylic sealer can cover up to 400 square feet.

Get the latest price from .

Tips To Keep Your Patio Clean Longer

For those who followed the instructions, scrubbed hard, and used the solution a few times without much luck, know that sometimes tougher measures are called for. A product like Wet & Forget should do the job. While the label says it is;bleach-free, phosphate-free, non-acidic, and safe near plants and on all outdoor surfaces , do take caution when using this product. Wear rubber gloves and avoid unnecessary dripping into your garden or grass.

Follow the directions on the container of the cleaning product, making sure that the previous cleaning solvents have been thoroughly rinsed off with a strong blast from the hose. While the product used may claim that scrubbing isn’t necessary, it will probably be necessary to have those sleeves rolled up; continue to scrub the moldy/mossy area until it’s free of all the green stuff.

Try revisiting the area in a week or two to keep on top of the mold and mildew. Persistence will pay offif you regularly do a light cleaning of the space, more thorough cleanings every few months won’t be necessary.


Black Mold On Concrete In Basement

For black mold on concrete in a basement, start by ventilating the area well. Because youll be using bleach indoors, open a window and escape the fumes when possible. Create a cleaning solution thats one part bleach to four parts water and apply it to the concrete. Allow this solution to sit for fifteen minutes before using a wire scrub brush to clean the mold off the surface. Make sure you leave the area while the bleach is soaking to prevent breathing in fumes. Its important to wear protective gear during this process, including rubber gloves and a respirator. After youve scrubbed the area, soak up the cleaning solution and apply clean water. Scrub once more and remove all surface water. Allow the area to dry completely. If your basement area is relatively damp, use a fan to dry the floor quickly.

You May Like: Build Grill Surround

Pressure Washing Your Patio

  • 1Equip a high-powered pressure washer. The majority of common concrete stains can be coaxed out with enough force. For more noticeable stains like rust, mold and compacted dirt, a pressure washer may be just the thing you need.XResearch source
  • Pressure washers unleash a concentrated stream of water, chiseling difficult messes from smooth, hard surfaces.
  • You can typically rent pressure washers from home improvement stores and gardening centers for just a few dollars a day.XResearch source
  • 2Spray off the surface of the patio. Aim the nozzle of the pressure washer downward and away from your body. Use slow vertical sweeping motions to push the dislodge dirt off of the patioXResearch source
  • Concrete is not easily damaged, so dont be reluctant to use the pressure washer on a higher setting.XResearch source
  • Make sure the surrounding area is set up for proper drainage. Otherwise, you could be left with standing water to deal with.
  • 3Wait for the concrete to dry. Keep the patio clear until all remaining water has been drained and evaporated. It may be possible to speed the process along by wiping off excess water with a squeegee or dabbing it with a clean, dry towel. Once its dry, you can put all furniture and other items back into place.
  • Concrete patios need to be pressure washed an average of once or twice a year to keep them free from buildup that may eventually cause structural damage.
  • Hydrogen Peroxide For Bleaching Concrete Surfaces

    How to Clean a Concrete Patio

    You will notice many homemade concrete patio cleaners contain bleach. I do not like to use bleach for a few reasons! First, it can get onto the grass when you rinse and kill grass. Second, if you have pets or children coming through the area, it is not a good idea. Although bleach is great at the whitening effect, you can use peroxide to achieve this. Hydrogen peroxide is an oxygenated bleach. It is safe for plants, so when you rinse this solution, it wont harm anything. It works together with the dish soap and baking soda to remove dirt and whiten dirty concrete.

    Read Also: How To Replace Fabric On Patio Chairs

    How To Clean Mildew From A Concrete Patio

    Related Articles

    • Stiff-bristled broom

    • Garden hose

    Mildew is a type of fungus that thrives in damp or dark conditions. When mildew grows on your concrete patio, it can appear as green or black, foul-smelling patches. It can ruin the appearance of the patio, and even cause or irritate respiratory problems, according to the U.S. EPA. Clean your concrete patio with a homemade solution to kill the mildew, and keep it clean and as dry as possible to prevent future growth.


  • Fill a bucket with 3 qts. of warm water, 1 qt. of bleach and 1/3 cup of powdered laundry detergent. Put on rubber gloves, and stir the solution with a wooden spoon until the detergent dissolves completely.

  • Move any furniture, plants or items from the patio before cleaning.

  • Pour the solution onto the concrete patio, concentrating on areas with mildew. Allow the solution to sit for up to 15 minutes.

  • Scrub the patio with a stiff-bristled broom to remove any remaining mildew.

  • Rinse the patio thoroughly with a garden hose to remove any bleach solution. Allow the concrete patio to air dry.

  • References

    Clearing Off The Patio

  • 1Remove all furniture and other objects. Before getting started, youll want to make sure your patio is completely clear. Find a place away from your work area to stash patio furniture, dining sets, planters, grills, toys and anything else that may be damaged by free-flowing water or cleaning solutions. Your work area should ideally be as empty as you can get it.XResearch source
  • Bring lightweight furniture inside, and move heavier pieces to the yard, sidewalk or a covered porch.
  • Prolonged exposure to moisture can cause metal furniture and appliances to rust.XResearch source
  • 2Sweep away excess dirt. Use a broom to dislodge as much loose debris from the patio as you can. This will make it easier to reach the more stubborn stains underneath, as well as give you an idea how extensive the cleaning methods you employ will need to be.XResearch source
  • Substances like compact dirt, dried mulch or sidewalk chalk may need to be scrubbed by hand using an abrasive sponge.
  • 3Spray the patio with a garden hose. Once youve swept the concrete, hose it down with a heavy stream of water. Push the dirt off to an adjoining section of the yard to drain. The concrete will then need time to dry before you can move on to other, more involved methods.XResearch source
  • If its been awhile since you last cleaned your patio, add some mild liquid dish detergent to a bucket of warm water to make a soapy rinse. The surfactants in the soap will help break up dirt and oil more effectively.XResearch source
  • Also Check: How To Get Dog Hair Off Patio Cushions

    Is Black Mold On Concrete Dangerous

    Yes, mold on your concrete surfaces can be dangerous. When exposed to large amounts of black mold, some people develop allergic reactions or asthma. People who are not allergic to mold can also experience irritation in their eyes, nose, skin, lungs, throat, or skin. People who are allergic to mold experience symptoms such as a running nose, prolonged sneezing, skin rashes, and red eyes when exposed to it. If one has a severe allergy to mold, he or she might experience severe reactions such as a shortness of breath, and this can be fatal. In some instances, people who have asthma and have developed mold allergy are likely to experience asthma attacks when exposed to mold.

    Act Now and Remove Mold from your HomeCall a Professional Mold Remediation Specialist or Get Up to 4 Quotes Now.

    How Do You Remove Moss And Mildew From Concrete

    How to Clean Cement Patio Slabs

    The best solution is to scrub and clean the affected areas with a mold-killing detergent or a simple solution of household bleach and water. Be sure to scrub aggressively to get down into the pores of the concrete. Let the detergent or bleach solution soak in for a while to ensure that all the mold is killed.


    Read Also: How To Keep Chipmunks Off Patio Furniture

    We Have A Problem With A Room In Our Basement It Is Uninsulated And Has A Moldy Smell The Odor Is Worse In The Winter Months My Son Likes To Sleep In The Room

    Youll want to focus on two items increasing the temperature and the air flow.; Addressing these issues will lower the humidity and the mold growth/musty odor.

    Purchase a relative humidity gauge and install it in the basement.; Your goal is to keep the RH below 50%.; Increase the heat as necessary to lower the RH until youve reached 50%.

    The easiest way to increase the ventilation is to run a bathroom exhaust fan.; If theres an existing fan in the basement, run it at least 12 hours per day in the winter months.

    Its also important to verify whether the basement is suffering from vapor emissions through the concrete slab.; This occurs when water vapor moves up through the slab and into the room above.; If the basement is carpeted, the moisture can become trapped and lead to mold growth.; ;See our page on basement mold for more info.


    There Has Been A Wet Smell In Our Newly Purchased Home Since We Got Here The Previous Owners Did Not Heat The Home In The Winter Months And There Is Very Poor Ventilation In The Basement We Removed Some Gyproc Todaydoes It Look Like We Will Have To Remove It All

    Yes, the sheet rock should be removed.; This is necessary not only to clean up the existing mold, but to implement the prevention measures.

    First, you need to identify the source of the moisture.; Three possibilities exist.; 1.) Condensation from the warm interior air hitting the cold concrete wall.; This typically does not happen behind a well sealed wall , but its possible.

    2.); Vapor emissions through the concrete.; This occurs when moisture moves through the concrete in vapor form, creating high humidity and saturation on the surface.; In an uncovered wall, the water would simply evaporate into the air without causing an issue.; The installation of the sheet rock traps the moisture, leading to mold growth.; There are two solutions either keep the concrete exposed or install dimple board with a interior footing drain.

    3.) Liquid water intrusion.; Its possible youre having liquid water enter through the cold joint at the bottom of the wall.; If this is the case, youll see more damage at the bottom plate/framing than higher up the studs.; In most cases, the solution is an interior footing drain.

    Recommended Reading: How To Install Ceiling Fan On Insulated Aluminum Patio


    Prepare Your Cleaning Solution

    You can use either bleach or vinegar. If using bleach, take a bucket and mix one part bleach and three parts water. Keep in mind that bleach is incredibly toxic, so use a mask and gloves. Also, dont add anything else to the mixture as some other ingredients can create extremely toxic fumes when coming into contact with bleach.

    Vinegar is a far safer option as there is nothing toxic about it. To use a vinegar solution, mix one-half water and one-half white distilled vinegar into a bucket. To make it even more effective, add a scoop of baking soda and mix it well.

    How To Remove Mold From Concrete Floors: An Easy

    How to clean a stained concrete patio
    • After the mold and mildew has been removed you will want to use a penetrating concrete sealer to prevent it from growing back. By using a penetrating concrete sealer like the Siloxa-Tek 8500 mold, mildew and organic growth will be reduced and made easier to clean. The Siloxa-Tek 8500 is our favorite product to treat nearly any application
    • Cleaning concrete steps is an essential routine maintenance task for every homeowner it helps keep up appearances and make your home’s exterior look as beautiful as the interior.. Your concrete staircase has to face the extreme Utah elements, and it takes a toll. Since concrete is a porous material, moisture penetrates and contributes to mold growth when the surface can’t dry out quickly
    • Cleaning a Concrete Patio. First let’s jump in and tackle cleaning a concrete patio itself. Over time concrete and concrete pavers get dirty. There is often a general dinginess over time and potentially areas that have been stained. The surface of concrete is prone to moss, mold and mildew growth in damp areas and even in full sun debris and spills can stain the surface

    Don’t Miss: How To Identify Vintage Wrought Iron Patio Furniture

    What Kills Black Mold On Concrete

  • Place a hose on its most powerful setting to clean off the concrete.
  • Scrape off any remaining black mold with a spatula.
  • Mix a solution of chlorine bleach, detergent and water.
  • Apply the solution to the concrete with sponge or brush.
  • Rinse off the concrete.
  • My House Was Flooded From A Broken Water Pipe Resulting From A Freeze Is The White Snow Like Substance On Concrete Mold Or The Beginning Of Mold And I’ve Been Putting Rubber Mats On The Floor So That I Don’t Have To Walk On The Huge Amounts Of Dust From Replacing Drywall Please Tell Me How I Should Be Handling This Situation Ive Also Been Rnning Fans Thinking I Was Drying Out The Surface Of Concrete But I Turned Off The Fans After Reading The Fema Pamphlet

    White growth on concrete is nearly always efflorescence, not mold growth.; You can verify this by spraying a bit of water on the suspected growth.; If its efflorescence, it will disappear as the crystals are dissolved by the water.; If its mold, it will flatten, but remain visible.

    I recommend removing the rubber mats for now.; The impervious nature of the mats will prevent the concrete from releasing the moisture.; After a week or so, put a couple of mats back down.; Peel them back a few days later and look for signs of moisture on the underside of the rubber.; If you see moisture, pull them off and allow the concrete more time to dry.


    Don’t Miss: How To Remove Mildew From Patio Furniture Cushions

    Part 1 Of 2: Removing The Mold

  • 1Choose a cleaning agent to treat the mold. You can use a mold-killing detergent, diluted bleach, or a commercial cleaner made specifically for killing mold.XResearch source Dont mix anything other than water with bleach, as certain cleaning agents can produce highly toxic fumes when mixed with bleach.XResearch source
  • For a diluted bleach solution, mix three parts water with one part bleach in a bucket.XResearch source
  • You can also use white vinegar to kill mold.XExpert SourceCertified Mold Assessor & Home Inspector, Sonic Home InspectionsExpert Interview. 19 August 2020.
  • Dont forget to test a small, discreet area first. Bleach and other chemicals can discolor concrete thats been colored or stained.XResearch source
  • 2Remove affected items. Any organic material adjacent to the moldy area can be infected. Throw away any disposables like cardboard boxes. Set aside other removable items like furniture or area rugs.
  • 3Apply the solution. Use a heavy duty sponge or scrub brush to apply your chosen cleaning solution to all visible moldy areas on the concrete. Scrub the areas vigorously. If youre using mold-killing detergent, apply it directly to the spots and scrub it with a bristle brush.XResearch source
  • Dont use a wire brush, which can scratch concrete.XResearch source
  • Wear old clothes, rubber gloves, safety goggles and a respirator or dust mask.
  • Video: Removing Black Mold From Concrete Patio Basement Floor

    How to clean paver stepping stones also works for patio brick concrete rock

    Keep Your Outdoor Tile Patio Beautiful, Clean and Free of Mold Outdoor tile patios are common in warmer climates of the United States like Arizona, Florida, New Mexico, and California. It is easy to keep an outdoor tile patio clean if you do regular maintenance If you have greenish-black stuff on your concrete patio, it’s probably mold, mildew, or moss. Damp or moist conditions from rain or humidity can encourage mold and mildew to grow in those nooks and cracks of concrete pavers or bricks Luckily, cleaning it is easy and only requires a few tools. Here, our asphalt paving experts explain how to deep clean your asphalt and concrete: Removing Dirt/Debris. Before you deep clean your asphalt or concrete, you’ll want to remove the dirt and debris from the surface After the mold has been scrubbed off your concrete walls, allow your mold remover to sit for 15 to 20 minutes before proceeding to dry your walls. Step 3 – Apply Your Finishing Touches. Having rid your basement walls of mold, you’re almost finished. You’ll now need to fully dry the freshly cleaned walls with the aid of a clean cloth Concrete driveways are prone to dirt, residue, mold or mildew. Yes, you can clean them with bleach. In fact, bleach not only removes many stains, but it also deodorizes and kills mold and mildew when used properly

    Also Check: How To Stop A Patio Umbrella From Spinning


    RELATED ARTICLES

    Most Popular