Tuesday, March 26, 2024
HomeBuildHow To Clean Grease Off Concrete Patio

How To Clean Grease Off Concrete Patio

Have Your Driveway Professionally Cleaned

How to clean a stained concrete patio

If commercial degreasers still dont do the trick, or if you are not comfortable working with degreasers, you canhave your driveway professionally cleaned. If you go with this alternative, make sure you choose a contractor familiar with cleaning paving stones. It is particularly important that they know not to use a wire brush and that they know they need to take special care if using a pressure washer.

You might also consider having your pavers sealed after they are professionally cleaned. This can help limit staining in the future.

If all else fails, you can always replace the stained pavers. This is one of the benefits of choosing paving stones over stamped concrete or slab concrete. If concrete driveways or patios are damaged or have stains that cannot be removed, you would have to cut out and replace an entire slab. And, even after making this costly repair, the new section will be clearly visible, since it is nearly impossible to get new concrete to match the color of older concrete. However, with a paver driveway or patio, you can easily have one or more paving stones replaced and no one will even notice. So, if you cannot remove oil from pavers, replacing them is always an option.

How to Clean Paving Stones: Further Reading


  • No Sales Tactics, Just Our Best Price
  • $0Free Design
  • 25+Years of Experience With Dedicated Specialized Crews

Directions For Cleaning A Concrete Patio

Pressure Washer Application

  • AddSimple Green Oxy Solve Concrete and Driveway Cleaner. Pour Simple Green Oxy Solve straight into your pressure washer detergent tank, or drop your siphon tube into the bottle.
  • Rinse with water. Switch equipment to plain water at low pressure and wet the surface.
  • Apply Simple Green. At low-pressure setting, apply Simple Green Oxy Solve to an area that is small enough to be rinsed before it dries.
  • Let sit. Allow the cleaner to dwell on the surface for 3-5 minutes.
  • Rinse with water. Rinse at high pressure, keeping the nozzle at least 2 feet from the surface and the spray perpendicular to the surface.
  • Repeat. Move to a new section and repeat.
  • Manual Application

  • Make Simple Green mixture. Mix 1 measure of Simple Green Oxy Solve with 20 measures of water in a bucket .
  • Scrub. Clean in sections with a soft-bristle brush, paying extra attention to stained areas. Do not allow the cleaner to dry on the surface before rinsing. Do not scrub with a wire brush, as metal pieces can sink into the pores in concrete and eventually form rust stains.
  • Rinse. Rinse with a garden hose at the highest pressure.
  • Repeat. Move to a new section and repeat.
  • TIP: Clean your patio on an overcast day. Your cleaning solution will evaporate more slowly when the sun isn’t beating down on it. It’s also a good idea to start cleaning early in the day before the sun has the chance to warm the surface.

    Time To Scrub Rinse And Dry

    Give the cleaning mixture time to do its thing. Wait around 30 or so minutes so that the mixture can begin to eat away at the grime and dirt sitting on the surface of the patio. From here, it is time to scrub, scrub, scrub.

    If you planned on using a metal brush, toss it. The metal brushes can leave small pieces of the metal embedded in the concrete. These small pieces can rust and create a whole new cleaning issue that you have to deal with.


    Use something such as a brush with nylon bristles. These are gentle enough to not score or break off in the concrete but sturdy enough to get the grime up. You can also go one of two ways with the size of brush that you choose.

    The first is a small, handheld brush. This allows for the greatest leverage but it also means getting on your hands and knees or bending down to do the scrubbing. There are plenty of us out there who have bad backs, making this a less than ideal option.

    There are also brushes with longer handles so that you can operate them while standing. Think of the handles that you would see on a broom or mop.

    This can be beneficial when it comes to saving your knees and back so keep these options in mind while picking out your supplies.

    Give the entire surface of the patio a good scrub. You should see some of the looser grime and dirt begin to come up right away but a good scrub should get all of the dirty areas clean.


    Go over it as much as you need to in order to ensure that your patio is completely clean.

    Read Also: How To Keep Outdoor Rug From Blowing Away On Concrete

    Concrete Cleaner Or Degreaser

    Typically, concrete cleaners and degreasers are made from concentrated alkaline soap. These will loosen up the oil for easy cleanup. They do not, however, break down the oil so they will not work well on concrete that has been stained for a long time. This solution is most effective on porous concrete.

    Will Baking Soda Clean Concrete

    How to Remove Dried Automotive Oil Stains on Driveway ...

    Yes, baking soda can be used to clean concrete. Baking Soda really works wonders in cleaning concrete because it is highly absorbent due to its powdery nature.

    It also helps balance pH levels which makes cleaning surfaces from grime much easier too.


    We all know how difficult grease build-up can be when were cleaning our patios and concrete.

    Baking soda is a great way to cut through that build-up and get rid of the scum without scrubbing too hard!

    Read Also: Deck Over On Concrete

    Preparing Your Concrete For Cleaning

    Before the concrete cleaning process starts, check to see if you have the following items:

    • Broom
    • Gloves
    • Cat litter

    Depending on the size of the stain and how much of your concrete surface needs cleaning, you may not need everything on this list. If there is no excess liquid on the concrete surface and youre just doing a standard cleaning, sweep the area of any loose debris before using the cleaning methods below.


    If there is standing liquid on your concrete pour cat litter over the liquid and allow it to soak up the excess liquid for about 30 minutes. If you dont have cat litter, baking soda will also help to absorb the extra moisture.

    Once the liquid has been soaked up, and the litter or baking soda has been swept up and disposed of, then your concrete is ready to be cleaned.

    All of the methods below will require a scrub brush to remove a stain. Be sure NOT to use a metallic scrub brush because these brushes can leave behind metal bits that will rust and stain your concrete.

    What About Cleaning A Concrete Driveway

    This cleaner can also be used for driveways! The dish soap addition can help clean grease or oil. If you have heavy grease or oil stains on your driveway, increase the amount of dish soap in this solution to about 1/4 or 1/2 cup.

    Another thing I love using to clean driveway areas is Spic and Span. This was a product we talked about earlier in the year in our Old-Fashioned Cleaning Products post. This powdered formula is very effective at cleaning porous concrete with oil or grease stains. So, if you have some on hand or come across it, you can try it on concrete.


    You May Like: How To Make A Paver Patio On A Slope

    An Inexpensive Brand Of Cat Litter

    Cat litter is usually made up of highly absorbent clay and is surprisingly effective as an oil stain remover. But not all cat litter is the same. The more expensive brands tend to be made with perfumes and are prone to clumping up when they come in contact with moisture. Your best bet is to go with one of the less expensive brands.

    To clean oil off driveway, simply pour the cat litter on the stain and let it sit for around a half-hour. Next, use your broom to sweep up the litter. Then, use a bristle brush and detergent to scrub it clean, rinsing with water when youre done. If that doesnt do the trick, repeat the process.

    If you do not have cat litter, you can substitute cornstarch or cornmeal as your absorbent. Talcum and baby powder are also effective.

    How To Remove Cooking Grease From Concrete

    How to Remove Grease From Patio Grill Droppings

    This poultice remedy shows you how to remove cooking grease from concrete using baking soda. By adding another key ingredient, you will be able to remove grease from the concrete with ease. Baking soda also works well as a carpet stain cleaner, too, if you have some grease on the carpet.


    • Tape

    Combine enough acetone and baking soda until it forms a pasty substance. Spread the mixture onto the stain and cover with a sheet of plastic, taping the sides down firmly. Allow it to sit for 24 hours.

    Remove the plastic to allow the poultice to air dry. Once completely dried, sweep the area to clean grease off the concrete garage floor.

    Instead of running out and purchasing a pressure washer detergent, why not try a DIY stain removal method? You have many of the ingredients sitting in your home, after all. All you need is an absorbent such as cat litter or sawdust, a few natural cleaning additives such as baking soda, vinegar, and soap, and a good scrub brush.

    You no longer need to give that grease stain the ugly eye each time you pass it on the way to your car. Removing grease and oil stains doesnt have to be a chore once you know how to do it.

    Now that you know the ins and outs of how to remove grease stains from concrete, why not share them on Facebook with your friends and family?

    Don’t Miss: Diy Deck Boxes

    How Do You Remove Grease Stains From A Patio

    4.3/5greasecleanremovestainsstain

    To get rid of the grease, use baking soda, which naturally draws out the grease residue without harming the concrete.

  • Place a thick coat of baking soda over the entire grease stain.
  • Rinse a nylon scrub brush under water and drizzle the brush with dish soap.
  • Additionally, how do you get grease stains out of a sandstone patio? Sprinkle corn flour, baby powder or kitty litter over the oil to absorb any oil that has already soaked beneath the surface of the sandstone. Leave it for 15 minutes to allow it to absorb any moisture, and wipe it away with a damp towel.

    Also Know, how do you remove old grease stains from concrete?

    Get those unsightly grease, oil, and transmission fluid stains off your concrete driveway or garage floor. Spray them with oven cleaner. Let it settle for 5-10 minutes, then scrub with a stiff brush and rinse it off with your garden hose at its highest pressure.

    How do you get stains out of paving slabs?

    Spray any stained areas with oven cleaner, then let sit for 10 minutes. Rinse off with a hose, and the stains will disappear.

    Remove Oil From Concrete With Baking Soda

    Baking soda is another great cleaner for fresh oil stains. After removing the oil with a bit of cat litter, grab the baking soda and Dawn.

  • Sprinkle the baking soda on the stain. A big stain requires the whole box.

  • Let it sit for about 15 minutes.

  • Add several squirts of Dawn and enough water to make a paste.

  • Scrub with the brush in circular motions for several minutes.

  • Rinse with water.

  • Repeat as needed for deep stains.

  • You May Like: How To Paint Wrought Iron Outdoor Furniture

    How To Clean Concrete Patio In No Time

    By following the steps above, you can learn how to clean concrete patio either by hand or with a pressure washer. This is an essential skill to know so you can keep your outdoor space clean, hygienic, and an enjoyable place to spend time.

    Did you enjoy this tutorial? Let me know your thoughts in the comments and share the article if you found it helpful. As always, if you have any further questions, please feel free to request more information.

    Cleaning Your Patio Without Chemicals

    10 Clever Ways to Clean a Concrete Driveway

    The good news for those looking to clean their concrete patios is that you dont have to use those commercial cleaners to get the job done. All you need is some baking soda, distilled white vinegar, and some common garden tools such as a hose and a broom.

    The first step is to clear off the patio. If there are things in the way, you will never be able to reach all of the areas of the patio effectively. That means taking off any grills, plants, furniture, childrens toys, and what have you.

    Next, youll want to get rid of all the debris. It is common to have grass clippings, leaves, and other debris on your patio, especially on a windy day.

    Use your broom to sweep the entire area thoroughly, ensuring that there is no loose debris around. All thats left is to spray down the concrete with your garden hose to get it nice and wet.

    You May Like: How To Remove Door Frame

    Cleaning Concrete With Vinegar

    Vinegar is renowned for being an excellent natural cleaner. You can use it on your patio as well as the entire parts of your home because it is relatively safe.

    So, how to clean concrete patio without pressure washer, but using vinegar instead?

    To clean your patio, you will need to mix water with equal parts white vinegar. Place the mixture in a spray bottle.

    After that, spray the stain, leave it for a couple of minutes, then scrub it with a hard bristle broom or a special brush for decks and patios.

    If it appears not to work properly, then you may require to try spraying the stain with undiluted vinegar. Leave the solution for 10 minutes or so. Finally, scrub it.

    You can also try making a cleaning solution by mixing one cup of baking soda and two cups of distilled white vinegar to remove the heavy stain on a concrete patio.

    When you concoct them, you will find the mixture foam up. It is perfectly fine. Slowly mix them up until you get a cream-soup-like consistency.

    Once the mixture is ready, remove all furniture, planters, and grills from your patio. Make sure you clean it fastidiously from any loose debris.

    You can utilize a sweeper or a leaves blower to do this. After that, wet down the concrete with a spray nozzle of your garden hose.

    Next, use a sponge mop to spread the mixture over the patio. Let it for at least 30 minutes. Then, rub the stain with a nylon-bristled brush.

    How To Remove Oil Stains From Pavers Without Using Messy Cleaners

    When it comes to removing oil stains from the pavers of a clients home, you have a few options. If the stain is relatively fresh, you might be able to get it out with a simple bucket and brush method. By blotting the stain with paper towels or rags, then scrubbing it with detergent or soap, you can rinse it away without having to resort to a more intensive cleaning method.

    If the stain has settled in, however, you might need something stronger. Some types of oil removers have harmful chemicals in them which could kill nearby plants or otherwise contaminate the area.

    Others oil & grease remover work just as well without the added threat of contamination. Since this product is a;poultice cleaner, all you need to do is spread it out over the stain and wait for a period of anywhere from 5 to 8 hours. After a maximum waiting period of 8 hours, the stain will have been completely pulled out of the pavers, leaving you with a simple sweeping job to complete the cleaning process

    Don’t Miss: How Many Inches Of Base For Paver Patio

    How To Clean Concrete Patio Try These 5 Ways

    To clean concrete patios, you can wash with vinegar and baking soda mix or specialty concrete cleaner. To get out rust stains, youll need oxalic acid and a pressure washer. Mildew stains come out with bleach and pressurized water. Lastly, you can remove grease stains with cornstarch and degreaser.

    Are you looking for how to clean concrete patio? With just a few easy steps, you can transform a dirty space into the shining focal point of your outdoor living space.;

    I know how important it is to keep your outdoor spaces spic and span. More than looking good, a clean concrete patio can give you peace of mind and prevent you from slipping. Therefore, Ive put together this foolproof guide that you can follow.;

    Best Ways To Get Rid Of Oil Stains From Driveway

    How to Get Grease off a Concrete Driveway

    June 16th, 2020 by Fix Auto USA

    Oil, gas, and transmission fluids can leave a stain on your concrete driveway or garage floor that may seem nearly impossible to remove. Oil stains on concrete are not just an eyesore that detracts from the beauty of your home, but chances are they have also caused a squabble or two with your better half.

    If you knew how to remove oil stains from driveway using everyday household products and, in so doing, could bring a smile to your partners face, it would be a win-win, right?

    Getting rid of oil stains on concrete can be a challenge. After all, concrete is porous, retains dirt, and is a tough surface to clean. Sometimes you have to think outside of the box. Here are 10 tried and true ways to remove unsightly oil stains from your concrete driveway:

    Don’t Miss: How To Level Out A Brick Patio

    How To Tackle Large Cooking Oil Spills

    Its very hard to clean large areas of concrete soaked with cooking oil. Still, you want to preserve the;property value;and curb appeal of your home. Different commercial products designed for this type of cleaning include powerful degreasers and;microbial cleaners.

    Bringing in certified technicians is often more cost-effective than taking on the job as a DIY project, and its safer too. Otherwise, you have to rent the equipment, buy industrial-strength products and round up protective gear. In certain situations, you may also need to report the oil spill to the EPA.

    Many homeowners hire a restoration company that specializes in removing cooking grease from concrete parking lots and sidewalks. You want a team experienced with cleaning cooking oil from concrete in;commercial settings.


    RELATED ARTICLES

    Most Popular