Tuesday, November 29, 2022
HomeBuildHow To Measure Pavers For A Patio

How To Measure Pavers For A Patio

What If I Want To Figure Out Paving Patterns

Build With Roman – How To Lay a Paver Patio

While working with square or rectangular pavers and square or rectangular patios is straightforward, we appreciate that patterned designs can appear to be a bit more daunting.

Never fear, as long as you follow these simple rules, then working with patterned pavestones is also quite simple.

  • Assemble one repeating pattern
  • Calculate the area of that repeating pattern: $$Area\,of\,repeating\,pattern = Area\,of\,paver \times Number\,of\,pavers\,used$$
  • Calculate the number of patterns required: $$Number\,of\,patterns\,required=$$
  • Calculate the number of tiles required: $$Number\,of\,tiles\,required = Number\,of\,patterns\,required \times Number\,of\,pavers\,per\,pattern$$
  • For example

    Is It Ok To Build A Retaining Wall In Your Yard

    A well-placed retaining wall can create more usable space in your garden, especially if your garden has a natural slope or hilly character. Retaining wall construction is a simple project that offers many benefits and opportunities for landscaping. This guide shows how to build a retaining wall with concrete blocks.

    Materials To Calculate With Your Pavers

    Basic paver installation materials include:


    • Plastic to keep weeds from growing up through your pavers
    • Base material – avoid recycled base material for a patio it usually won’t stand up to high-traffic areas
    • Sand
    • Sealant to protect the pavers and help seal the joints
    • Compactor to create a smooth, flat surface for the paver installation

    Also Check: How To Clean Oxidized Aluminum Patio Furniture

    Roll Out Landscape Fabric

    • Add a layer of landscape fabric over the tamped soil.
    • Note: The purpose of the landscape fabric is to prevent the sand from mixing in with the soil. But its important to use a non-woven fabric, as woven landscape fabric isnt very permeable and can trap water under your patio. Look for fabric with at least a 20-year life span.

    Calculating How Many Pavers You Need

    brick paver patio calculator brick walkway calculator ...

    Finally, it is time to get your answer. In order find it, you just need to divide the total area of your project by the total area of your single paver, or single repeating paver pattern.

    As a safety factor it is recommended to buy 10% more pavers to account for cuts and broken pieces. If youre using a complex paver pattern, one that wont really be able to follow a straight edge line, that means a lot of cutting, so you might as well buy 20% extra.

    You May Like: Building A Deck On Concrete Patio

    How Long Does It Take To Build A Paver Patio With A Retaining Wall

    It is not easy to plan and build a cobblestone terrace on a steep slope. But along with the professionals, Mr. Outdoor Living it well built and at an affordable price. After spraying paint in the backyard, they are ready to be demolished. When installing the retaining wall, you need to dig out the foundation and place 67 bricks on the base.

    What Is The Best Paving For Patios

    • AZEK GLASS. Perhaps best known for its PVC decking, crown molding and crown molding, AZEK offers a range of VAST composite siding in standard, permeable and sanding options.
    • Place Pierre. This Plaza Stone has a relief surface with slightly curved edges that give it a slightly worn look.
    • Mirada.
    • Bristol.

    You May Like: How To Make A Flagstone Patio With Grass


    How To Square A Corner Using The 3

    Today we’re going to show you how to square a corner using the 3-4-5 method . Knowing how to square a corner using this method is useful in many construction applications, but specifically for laying paving stones.

    If youre reading this article, youre likely laying a square paver patio, driveway, or sidewalkand you want your corners to be just right. Below, weve provided an overview illustration followed by step-by-step instructions. Follow our instructions and youll have a perfectly square corner, every time.

    Find Patio Pavers That Match Your Patios Dimensions

    How to Build a Round Paver Patio

    You will notice when you calculate the area of your patio and then figure out the number of patio pavers you need, that the number of pavers may contain a fraction. You may also have an issue where the pavers you want to use have multiple sizes. Matching your pavers to your patios dimensions will, in most cases, require you to make slight adjustments to your patios size.

    Larger pavers will require more adjustment, especially if your patio is not very big. If you are set on an exact size and a particular paver, you may have to cut some of the paver to fit them in the area. If you are presented with this scenario, you should take some extra time to plan the layout of your pavers and where you will place the cut pavers so the design looks good.

    Recommended Reading: Patio Chair Webbing Vinyl


    Dont Forget To Lay Out Utilities

    Once you have completed this process and are happy with your patios size, location, and layout, STOP. Dont do anything else until you complete this next crucial step.

    Pick up the phone and call your local municipality and ask how you go about getting utilities located. You must do this for several reasons.

  • 1) It is a safety issue. Before you go sinking a shovel or post hole digger into the dirt, you sure do want to know where those underground electrical lines are buried. This one really shouldnt take a lot of explanation.
  • 2) It can lead to very costly mistakes. If you have a septic system with finger drains or anything like it, youll want to make sure you arent breaking it apart. These can be very expensive to repair/replace. Suppose you damage any public utility and you didnt have location services come out and mark your property. In that case, you can also be held liable for the cost to repair the public utility. Dont get in too big of a hurry and make this mistake!
  • Do I Measure My Patio In Feet Or Metres

    All of our paving flags and slabs are sold in metric units. Individual pavers have their dimensions displayed in millimeters , for example, the 600 x 600mm Bradstone Natural Granite Paving in Silver Grey. The area that the paving slabs cover, whether that be individually or in a pack is displayed in square metres – the Bradstone Ashbourne Paving in Weathered Grey is sold as a patio pack which covers 9.72m2. The laying pattern for this product uses a suggested area with the dimensions of 3.6m x 2.7m .

    Therefore, we always recommend that you measure your area in metres rather than feet. Dont worry though, if you are more comfortable working in imperial measurements, then give us a call on 0800 032 6306 and we can convert it for you.

    Read Also: How To Install Flagstones


    Build A Paver Patio On A Sloped Yard

    This post may contain affiliate links. If you click an affiliate link and make a purchase, I may earn a commission. Also, as an Amazon Associate I earn from qualifying purchases.

    Building a paver patio on sloping ground is not as daunting of an undertaking as many people think.

    The trickiest part of the project will be getting access to your yard to begin construction, but if you can get that far theres no need to worry about what lies ahead.

    I cant begin to tell you how many times I have been told by friends and family that they want a patio, but their yard is not flat.

    Sloping yards are an obstacle for most homeowners who considering adding a paver patio or any type of outdoor living space because the slope often creates drainage problems.


    There will be water accumulation on one side of the area versus the other if it slopes downhill.

    The good news is there are solutions!

    Today were going to cover three ways you could build your dream patio even if your lot has some uneven terrain and all those pesky drainage issues too:

    sloped ground , retaining walls, and terraced patios with steps/stairs. Each solution will have its own pros and cons, but you can find one that suits your needs.

    Here are some tips for how to build this type of patio in your backyard:


    But What About Patterns

    How to Install a Paver Patio

    Calculating how many pavers you need seems nice and easy when we’re talking about straightforward, rectangular bricks laid out next to one another. But you may be wondering, what about patterns? How many pavers do you need then? Don’t worry – the solution to this problem is quite simple as well.

    The trick is to assemble one repeating part of the pattern and calculating its area, then multiplying by the times the pattern repeats.

    For example:

    In the case of this particular pattern, to calculate the area, you would have to use the following formula:

    how many sets of the pattern are needed = total project area /


    You May Like: How To Make A Flagstone Patio With Grass

    How Much Does It Cost To Install A Stone Patio

    How much does it cost to install a stone patio? Residents of Western Australia are paying the lowest average cost for paving services at around $25/m2. On the other hand, Victoria has the highest average rate for paving installation at approximately $68.50/m2. In South Australia, the average rate of paving installers is at approximately $35/m2.

    How much does a 20×20 paver patio cost? How Much Does a 20×20 Paver Patio Cost? According to data from HomeGuide, a 20-foot by 20-foot paver patio runs from $1,900 to $6,800, including labor and materials such as clay brick, natural stone or concrete pavers. Obviously, the larger the patio, the more materials required and the greater the labor costs.

    How much does it cost to build a stone patio? Flagstone, also referred to as natural stone, includes materials like slate, travertine, limestone, sandstone, and bluestone. These options will be slightly more expensive and can cost anywhere from $15 to $30 per square foot, depending on the specific stone you choose and the size of your project.

    Is it cheaper to lay concrete or pavers? As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.

    How To Choose Paving Slabs

    This is the fun bit – choosing your patio paving! If youre looking for a traditional style, why not take a look at the Bradstone Natural Sandstone Paving available in six different colour options, exhibiting natural veining and a riven profile, with this Indian sandstone youre sure to find the perfect paving stones for your outdoor area.

    If you prefer a product more uniform in colour, a manufactured concrete paving slab product such as Bradstone Old Town Paving is a great choice. The traditional charm of Old Town recreates the appearance of timeworn flagstones whilst keeping greater colour consistency from slab to slab. This range has been produced from moulds replicating 19th century cotton mill flooring incorporating tooling marks and weathered edging.

    Also Check: How Do You Hang Outdoor Patio Lights

    How To Build A Pergola On A Concrete Patio In Two Days

    Building a pergola is a quick way to add a touch of class to your outdoor space, and its certainly something a homeowner can tackle by him or herself, and can even finish in a couple of days if sufficiently motivated. Additionally, for those who arent very experienced in building things with wood, this is a good starter project to develop skills that will readily transfer to other projects.

    Ill note right away that I was able to build this pergola in two days however, Ive done this sort of thing a few times now, and I have a lot of power tools that make the job easier. If your skills arent high and/or you have a limited tool set, it will take longer. Dont despair though this still makes a great fair-weather weekend project that can be built over a couple weeks.

    In the steps that follow, I link to videos I made for the build. The links go directly to the timestamp in the video pertaining to that particular step, so dont think Im just spamming the same video over and over ? You can also watch the in-depth videos in this playlist. My intent for this Instructable, with the videos to complement, is to be the most comprehensive tutorial online for building a pergola.

    Also, check these links if you are looking for premade pergola plans or a custom pergola for your own yard.

    Patio Under A Grill Or Outdoor Kitchen

    How to estimate a paver patio

    Goal: Make a space for cooking outside and hosting guests

    Approximate size: 8 to 10 feet long and wide or larger, depending on outdoor kitchen arrangement

    When determining the size of a patio for an outdoor kitchen, youll need to consider the size of your outdoor grill or outdoor kitchen, as well as how many people youd like to be able to host. Except for the smaller movable models, most outdoor grills start at about 2½ feet across and go up from there.

    Elizabeth Przygoda-Montgomery of Boxhill Design recommends allowing at least 2 feet , and ideally 3½ feet , around the grill for circulation. At a minimum, a patio with a grill should be roughly 8 feet wide and 10 feet long , with the grill positioned at least 4 feet away from buildings.

    Patio Measurements 5: BOXHILL, original photo on Houzz

    Patio details: Stylish grilling and entertaining patio

    Location: Tucson, Arizona

    Dimensions: About 14 by 20 feet

    Material: Poured concrete, stained and etched

    Cost: Roughly $12 per square foot, including materials and installation

    At 280 square feet , this sleek poured concrete patio provides enough room for a grill station with bar seating and a dining table for six people, separated from the grill by a comfortable walkway thats 3 feet wide.

    Przygoda-Montgomery also suggests adding at least 1½ to 2 feet on each side of the grill to rest pans and other cooking gear. You can also extend the countertop to create bar seating or a buffet area, If space and the budget allow.

    Also Check: How To Fix A Patio Umbrella Pole

    So How To Calculate How Many Pavers I Need

    The first thing that you need to do in order to discover how many pavers you need for your project us to measure its area. So, lets say that you want to build a patio. You will need to ensure that you measure both the length as well as the width. Since you need to determine the square footage of the patio, all you need to do is to multiply the width by the length of the patio.

    Make sure to check out our Paver calculator.

    Then, you need to discover how many pavers you need for your patio. The truth is that pavers dont all have the same size or shape. Below, you will be able to see a table with the most common sizes of pavers. Nevertheless, and to make things as simple as possible, lets just assume for now that the paver size that you want to use id 12 X 12. So, in this case:

    144 / 12 X 12 = 144 / 144 = 1

    This means that you need one paver per square foot.

    As you can see, you already determined the square footage of both the patio as well as of the paver that you want to use. So, in order to discover how many pavers you need, you just need to divide the square footage of the patio by the square footage of the paver.

    Additional Online Patio Paver Calculators

    Online paver calculators help to estimate what you will need for your project. On some websites, the actual cost may also be calculated for you. Many of these websites also offer tips and tricks for creating the perfect patio or walkway.

    • Pro Patio: This site offers a paver calculator as well as step-by-step instructions on how to create a patio, from excavation to applying the sealer.
    • Better Homes and Gardens: BHG offers a very simple calculator for your project. Enter the perimeter length in feet, and then choose the size of the paver. The calculator will do the rest.
    • Monument Masonry: This site offers six different calculators for a variety of paver projects. It also gives specific instructions for the installation of your paver project.
    • Oberfields: This site has a calculator for Belhaven, Lincoln, Monroe, Washington and Washington Circle pavers through their line of products.

    Read Also: How Many 50 Lb Bags Of Concrete In A Yard

    How To Get Square Corners

    Patio corners must be square, and there are a few ways to accomplish this. If your patio is a rectangle, then you can measure from one corner to the opposite diagonal corner, and when the measurements are equal, the patio is square.

    Another method to ensure a patio corner is square is to use the Pythagorean theorem, or the 3, 4, 5 rule. When side a is 3 units and side b is 4 units the measurement that connects the end of those measurements to form a triangle should be exactly 5 units.

    To use the Pythagorean theorem, measure one edge of the patio to 6 and measure the adjacent edge to 8. The measurement between the 6 mark and the 8 mark should be exactly 10 when the corner is square.

    How Long Does It Take To Build A Paver Patio With A Fire Pit

    How to Install a Paver Patio in 6 Easy Steps

    Place broken pavers or grass clippings at the back of the fireplace. These pavers on the floor next to the fireplace serve as a good barrier between the fire and the pavers on the terrace. You can build a paved patio with a fireplace using a ready-made kit from dealers who will assist you if needed.

    Also Check: Sub Base For Paving


    RELATED ARTICLES

    Most Popular