Wednesday, August 3, 2022
HomePatioPost And Beam Patio Cover Plans

Post And Beam Patio Cover Plans

Tips For Purchasing Materials

How to Make a Two Post Patio Cover – Cantilevered Design
  • Be flexible. I had originally planned on using 4×4 beams and joists, but local codes wouldnt allow for them, so I used 10×2″ headers and 6×2″ joists, which worked out just fine. Also, be prepared to modify your plan at the store when youre getting your materials, as doing so can save you money. For instance, I chose drywall screws instead of nails because, for some reason, they were less expensive, and they wont try to work themselves back out after a few years. Another substitution I made was choosing 3- and 4-inch deck screws instead of framing nails. Although more costly, they hold much better than framing nails outdoors.
  • Shop around. Shopping around for the best prices for materials was absolutely necessary. In the same town, in an area of fewer than 10 miles, the difference in prices was enormous. Total material costs ranged from $2,200 down to $800.
  • Beware the store associates. Some are aggressive and want to push customers into an insane buying frenzy, bringing up a storm of confusing nonsense that somehow equates spending more to saving more. The lumber store I bought from had an associate who simply made sure I bought the correct materials for the job by looking over my plan and suggesting shorter screws for the joist hangars and a lower grade of lumber for the areas of the patio cover that would not be exposed to the weather. The associate also arranged for delivery, which cost $25.
  • Architectural Posts & Columns

    Many millworks produce classical and decorative columns, available through dealers. Those that need to function as structural members are usually made from solid wood, aluminum, or fiberglass composites.

    Columns that do not need to support the structure usually have a post made of wood or steel covered by a decorative shell that may be made from wood, aluminum, fiberglass composites, or polyurethane. You can also purchase columns in kit form and customize them with caps and bases to create the decorative look you want.

    How To Easily Build A Diy Patio Cover

    A DIY Patio Cover can be easier than you imagine.

    There are many possibilities to plan and build a patio cover every area is uniquely different. In spite of the differences from project to project, in most cases, in less time than the average turkey takes to bake, you could build a gazebo, pavilion or pergola to cover your patio. We have had families enjoying lunch or dinner beneath their newly erected ShadeScape kit the same day it was built.


    Covering a patio can extend your home and provide shade while reducing cooling costs. It also is perfect for multi-level homes/buildings, great for apartments and condos, entryways, existing patios, balconies, etc. to give more livable space. Best of all, it does not have to be a stressful or strenuous task. A patio cover can be quick and easy, built to last and stand against strong winds.

    It looks awesome!! Only took about 3 1/2 hrs. My brother said this is a GREAT kit!!! Said if you ever needed anyone to install in our area that hed be more than happy to do it. Just wanted to let you know how excited we are!Karen Reynolds Enterprise, AL

    You may be wondering how building a massive, oversized timber frame structure can be as fun as our ShadeScape families tell us.

    For many reasons, but firstly,

    there is an essential element that makes a Western Timber Frame architectural ShadeScape timber kit far superior to conventional and ancient time-proven architectural timber frame structures.


    Secondly,we do all the hard work for you.

    Read Also: How To Block Wind On Patio

    Consider Reed Grass For Coverage

    Architect Mark Buchanan of Newmann Lewis Buchanan Architects designed a simple shade structure at this farm using a metal arching framework to support a reed-grass cover. As mentioned previously, natural materials make a great choice for fully embracing nature in an outdoor space.

  • 32 of 50 Don Bloom / Tropical Light Photography

    A modern hardwood flat-roof overhead was built by Rick Ryniak Architects to allow the homeowners to relax and enjoy the surrounding view. When you add in a full covering like this, there’s more of a chance to play with the type of furniture and accents used outside because there’s less exposure to damage-causing elements.

    Continue to 33 of 50 below.

  • Installing The Patio Pavers

    Exposed Beam Cedar Structure

    The next day youll find the concrete hard enough to lay the patio pavers. You can buy these at most home centers or patio supply stores. Check the thickness of your pavers before you buy. Our pavers were a bit under 2 in. thick so we needed to level about 3/8 in. of sand over the concrete as a bed for them. Make another screed like the one shown in Photo 3 with a notch cut the same thickness as your pavers. Pour in the sand and pull the screed board across the timbers to even the sand over the concrete. Next, lay the pavers in place as shown in the Figs. A and B. We selected two colors to complement the pavilion, but you can design your own pattern.

    You may need to further level some of the corners of the patio stones. Just lift the paver and add or remove sand as needed . If your patio ended up a bit out of square, you may have to cut the edges of some pavers to make them fit. If so, but a masonry blade for your circular saw, put on some goggles and gloves, and trim the edges.


    After spreading a thin layer of sand over the concrete, lay the patio stones in place. Sprinkle handfuls of sand to level the stones with the tops of the timbers.

    Outline the post locations by tracing around the end cuts of the posts. Be sure you place the outer edges of the inner post 78 in. apart to get the right locations to conform with the beams above. This is crucial for the roof framing to align. Allow a 3-in. space between the inner and outer columns.

    Read Also: How Do You Measure The Size Of A Patio Umbrella

    Design An Outdoor Living Room

    Dena Brody Interiors transformed this outdoor space into a true living room complete with Gloster patio furniture, ceiling fans, and a custom kitchen. One portion of the space is fully covered while the other gets more light due to some thoughtfully-built beams. An area like this gives you every reason to spend more time outdoors when the weather is nice .

    Go For A Thatched Shade

    Higgins Architects opted for this unique shade structure with a metal framework and a thatch-style roof instead of a more classic option. It feels ultra fitting for an outdoor spaceespecially for people looking to make their exteriors feel more natural. The addition of plants, stonework, and tile adds to that aesthetic.


    Also Check: Does A Patio Need To Be Level

    Getting A Building Permit For A Patio Cover

    Some people said a building permit was unnecessary, while others said it was impossible to get without a contractor’s license, or that it would raise my property tax, etc. So I called the permit and licensing office and got the correct answers.

    • Yes, a permit was required.
    • No, it wouldn’t raise my taxes,
    • As long as the property owner didn’t care if I wasn’t a licensed contractor, they didn’t either.

    Getting the building permit was actually much easier than I thought. I took the plans to the towns permit and licensing office, filled out some paperwork, and the next morning I got a call and went back to the permit office to pick up and pay for the permit, which came to $85. They made a couple of alterations to the plan that not only were easy to accommodate but also made the project easier and cheaper!

    To prepare for the final inspection, I took pictures of each critical step to show the building inspector, which made the final inspection a snap.

    Building Permit


    Add A Dash Of Vibrancy

    Timber Frame Style Pavilion Gazebo for Backyard or Patio – post and beam

    A Mexican-inspired patio for a home in Metairie, Louisiana, was designed by Mullin Landscape Associates. There is a blend of fantastic colors happening in this space. Hanging from the painted wood-frame shade structure is a gold and white pendant light that adds a playful touch of metallic. But the most powerful splash of color comes from the neon green and aqua blue chairs and pillows.

    Don’t Miss: Can You Build A Patio On Top Of Grass

    Beginning Construction On The Patio Cover

    Early the next morning, the materials arrived at my house. Once the materials were unloaded, I began carrying the 10-foot-long boards and corrugated metal sheets to the backyard, laying them out in a pattern to roughly match how they would be assembled.

    I also separated the corrugated metal sheets, wiped each one down with a light coat of vegetable oil, and then re-stacked them. This was something I had seen a neighbor do a long time ago when I was a child. I dont know if it served any purpose other than making me feel better. Its a step I probably could have skipped, but who was I to doubt the wisdom of the ancients?

    Ledger Board Installation


    Rather Watch Us Build Our New Patio Check It Out On Youtube

    So lets start from the beginning with the design. My husband wanted the biggest deepest patio we could get with unobstructed views. Our current patio was 30 long and that length was good so that we didnt cover the windows to two of our bedrooms. Our house is already on the darker side and we wanted to keep as much natural light inside as possible. So we knew 30 long, but how were we going to that big of a span without posts in the middle? I didnt think it was possible, but my husband wouldnt give up on it. So I went and talked to an architect friend and he said it would be possible with an 18 glulam. He also suggested adding another set of posts close to the outside that wouldnt block any views but would help balance the look. I totally agreed and is one of our favorite features. He also said we could get away with smaller joists, but because we were leaving them exposed, I went with 3x8s to again balance the look. As far as the depth, we settled on 14 so that we could use standard 16 joists rather than having to up the joist size to 20 and then cut them down to size.

    Next up was #DemoDay! It was sure nice to see the old patio go down and that meant things were getting real! I did salvage the wood and made a dining table for the new patio. If you havent seen that build, you can check it out here. It is a real conversation piece when I tell people what I made it from.

    Then lastly some paint, lighting fixtures and the patio was ready to be enjoyed.

    You May Like: How To Build A Concrete Patio Slab

    Build Out A Narrow Covered Patio Path

    Birdseye Design created a rustic and elegant path of pavers that also serves as a narrow patio for this home. It’s ideal for staying out of the sun while still enjoying the warmth of summer. Lining a space like this with different seating options is the best way to take advantage of the shape, as seen here.


    Freestanding Metal Roofing Patio Cover

    The Riverside Timber Frame Porch

    The aim of building a freestanding patio cover is to protect you from the rain and the glare of the sun. Therefore, you can use any materials for the roof including the tin roof.

    Tin roof, just like any other metal roofs, has many benefits. Tin roofs are more durable than wooden and plastic roofs. They are also lighter which makes them easier to install. They are also resistant to fire.

    This patio features a very simple structure and there is nothing wrong with that. The simple structure tends to be practical rather than aesthetical.

    The black metal posts and beams are sturdy enough to support the tin roof. To get a cooler breeze, a fan hangs over the table.

    Read Also: How To Hang Pergola Curtains

    Best 3d Final Fantasy

    breaking news erath county tx

    new punk bands

    5600x 6800 xt benchmarks

    vet tech practice test free

    Finishing with Roof and Trim. See also: Shed Style Garden Pavilion Related Posts Timber Frame Style Pavilion Gazebo for Backyard or Patiopost and beam. Watch this video on YouTube. The Sketchup Model. The posts will sit on formed concrete piers. Theres two beams running North to South. And two beams running East to West.

    port washington houseboat for sale

    luxury tall ship for sale

    longan wholesale

    skyblock ah flipper

    eth test faucet

    Exposed Beam Cedar Roof Patio Remodel Concrete Patio Cedar Roof Cedar Patio Cover Outdoor Covered Patio Patio Design Patio Makeover … Gabled Cedar Patio Cover With Travertine Paver Patio And Chopped Stone Post Wraps Spring Tx By Www Primooutdoorliving Com Patio Paver Patio Backyard Patio.

    power bi previous year not working

    eso launcher stuck on loading linux

    RANGE. We specialise in supplying a wide range of roofing products including Laserlite Polycarbonate Patio Roofing, Ausdeck Insulated Patio Roofing, the complete range of Metroll Colorbond roofing gutttering and flashing, Solarspan Patio Roofing, Bluescope, Stramit, Stratco, EGR, Galaxy Patio Rooflite and Buildex.

    the medium thai movie ending explained reddit

    where can i buy pct for sarms

    Step : Building The Roof For The Patio Cover

    Rafterspatio-cover

    Use 2×8 lumber for the rafters. Make the 5 degree cut to one end of the rafters. In addition, mark the cut lines over the boards and make the birdsmouth cuts.

    Fitting-the-rafters

    Fit the rafters to the top of the patio cover structure. Place the rafters every 16 on center. Use rafter hangers to lock the rafters to the ledger boards and rafter ties to secure it to the to plates. Insert 1 1/2 structural screws to secure the rafters into place tightly.

    Fitting-the-purlinslean-to-patio-cover

    Use 1×4 lumber for the roof purlins. Lay the purlins to the top of the roof, staring from the bottom to the top. Align the edges flush and place the purlins every 16 on center. /insert 2 1/2 screws to lock the purlins into place tightly.

    10×24-patio-cover-plans

    Fit the metal roof sheets to the top of the patio cover. Align the edges and then insert screws to lock the sheets to the purlins.

    Recommended Reading: How To Restore Patio Furniture

    Turn The Space Into A Plant Oasis

    Plants always add to the charm of a space, especially when they become the main focus. This beautiful and eclectic eco-conscious outdoor space was created by Carson Douglas Landscape Architecture for a Santa Ynez, California, ranch. Many features are custom-designed, like the redwood pergola, which supports healthy, lush vines, the redwood vegetable boxes, cold-season A-frames, and metal-frame fire pit, infilled with stone to resemble a gabion.

    Inspiration And Tips For Your Pre

    How To Build Patio Cover pt. 2 framing

      The Spruce / Christopher Lee Foto

      A well-designed patio cover can enhance your outdoor living experience and increase the amount of time you spend outside. For any major outdoor structure, you’ll want to work with a professional, like an architect or landscape architect, to make sure your building complies with city codes and is engineered correctly. Other considerations before planning, designing, and building a patio cover include:

      • Budget
      • Architectural style of your house
      • Materials you desire and what is available in your region
      • Location
      • Size and scale of patio and overhead
      • Orientation of the patio to the sun, like a hot west-oriented or cold northern location.

      Take a look at 50 very different patio cover ideas that will certainly spark some ideas for your own project.

      Don’t Miss: How To Install A Concrete Patio

      Pick Out A Polished Wood Focal Point

      Many good patio cover ideas blend together interior and exterior components. An intricately detailed, polished wood ceiling is the focal point of this outdoor structure designed by Texas Custom Patios. On top of this, interior elements like accent rugs and multiple seating areas make it feel even more elevated.

      Freestanding Patio Cover With Traditional Accent

      This patio provides a bit traditional accent to your backyard. It is like the ones that you can encounter in Bali.

      The stained wooden posts give a more natural and impressive look to the patio. The exposed beam ceiling makes the patio look more attractive although it does not feature sophisticated patterns.

      The black roof shingle plays an important role in creating the traditional ambiance. It suits the chairs perfectly.

      Since the roof slopes down from the center, it does not accumulate water, snow, and leaves which makes it easier to clean.

      Also Check: What Kind Of Tile For Outdoor Patio

      Extend Indoor Space Outwards

      Alise OâBrien Photography

      A young family’s passion for the Colorado lifestyle is reflected in the outdoor space created by Mitchell Wall Architecture and Design. Built from local woods, the covered room attaches to the home and flows from the living room and kitchen to the yard and swimming and spa areas.

      Fastening To Masonry Walls

      Hours: Bethel, CT Store: Sheds, Garages, Post &  Beam Barns ...

      Anchor a ledger to a masonry wall with expanding anchor bolts. Begin by marking a line across the wall for the ledgers top edge. Drill holes for the expanding anchors every 16 inches or as specified by local codes, insert the anchors, hold the ledger in place, and tap it with a hammer to indent the anchor locations on its back face.

      Remove the ledger, and drill bolt holes where the bolt tips have left marks. Push or hammer the ledger back onto the bolts, recheck for level , add washers and nuts, and then tighten the bolts.

      Don’t Miss: How To Build Patio Cover Not Attached To House


      RELATED ARTICLES

      Most Popular