Other Factors That Affect Cost
Your paver patio project would be easy to plan if size was the only factor affecting costs. But there are many other factors to consider, such as the patios location, shape, and paver material.
For example, a concrete patio with a square shape will cost much less than a curved stone paver patio. Lets take a deep dive into how different facets will affect total cost.
- Material: Brick often comes to mind when we think of paver patios, but there are many different patio materials you can choose from. Note that some paver materials are more expensive than others.
- Labor: Anything that makes a professional patio installers job harder will run up the bill.
- Shape: Right angles make it easy on the pros. Start throwing curves and tight corners around, and the pros will have to work much harder to install the pavers just right.
- Location: Want to install your patio on a site with bumpy terrain? Youll need to pay for some land grading first.
- Paver Design: Most paver patios involve a basic paver installation. But if you want your pavers to resemble a special design, such as a mosaic or spiral, expect labor costs to rise.
- Intended Use: Installing your paver patio around a pool? Want your patio to bear the weight of heavy vehicles? How you plan to use your patio will affect some material choices .
The Issues Of Permits Understanding The Building Codes
In most areas, patios, and decks below 30 inches above grade are considered part of the hardscape and do not require permits. There are several reasons that patios rarely require permits.
- Patios usually sit at or near grade level and dont require handrails or stairs for access
- Patios are not attached to the home structure thus, there is no alteration to the houses structural part.
- There is no danger of collapse that could endanger lives or other peoples property.
Do Any Easements Setbacks Or Hoa Restrictions Exist
You will need to consult your Plot Plan. If you dont know if you have a plot plan, check with your closing documents when you bought your house. Its usually with all those other papers. You will also want to check your HOA bylaws . Some contractors will actually ask for your plot plan at your first meeting, to figure out if there is anything that we need to work around. There is nothing more frustrating than designing something, loving it, then learning you cant do it because it violates an easement. The plot plan is usually pretty cut and dried, and a qualified contractor can help you decipher all the markings to ensure you dont have any problems later. In my experience, occasionally HOAs can be another story. For the most part, as long as its nothing gaudy or crazy, they dont care what you do in your backyard, and as long as you pay a $25-50 fee and submit for approval, they rubber stamp it and you are good to go. However, I have ran into a couple cases where they got pretty picky about what you can build and where, especially if you are going outside of the build lines of your house.
Recommended Reading: How Deep Should A Patio Sub Base Be
How Much Does A Paver Patio Cost
- National Average: $4,537 or $11.34 per square foot
- Typical Range: $3,476 to $8,872 or $8.69 to $22.18 per square foot
The average cost for a 400-square-foot patio is $4,537 . The typical price range for a 400-square-foot patio is $3,476 to $8,872 .
The total cost of a paver patio will vary depending on many factors, including the patios shape, paver pattern, and site location.
Do I Need A Permit To Put A Roof Over My Deck
Do I needpermit to put a roof over my deckrequire a permitroof
Installing a porch roof over an existing is usually not recommended unless the was originally designed to support a future porch. Typical are designed to support 55 PSF . Porch require 25 additional PSF for roof loads for a total of 80 PSF.
Also, how do I put a roof over my deck? Most hand-framed porch rafters are installed at 16″ on center along the ledger board. Toe nail the rafters in place to the ledger board. Install the birdsmouth of the rafter to the header with framing nails. Install the plywood roof sheathing over the rafters to create the subroof.
Also Know, how much does it cost to put a roof over a patio?
The average cost for a patio roof addition using low-maintenance wood-patterned aluminum runs for about $6,000 to $10,000 for an area of 20 by 20 feet, as of 2011. A screen can be added for an additional cost of $3,000 to $4,000.
How much weight will a deck support?
However, one rule of thumb to keep in mind while answering the question is that the answer commonly is that if a deck is properly designed, it’s built to hold 50 lbs. per square foot. It’s possible that it could hold much more weight than 50 lbs.
Don’t Miss: Propane Or Butane Bbq
The International Residential Code The Irc
Most cities and towns recognize or have adopted the IRC as the governing building code. The IRC is rather silent about patios and decks at or near grade level with the home. Specifically, the IRC mentions patios in only two or three places. The one that concerns most homeowners is the regulations on slope and drainage. The IRC states:
All hardscapes within 10 feet of a building must slope away from the building with a minimum slope of 2 percent. That means that the patio must slope away from your house at least 1/4 inch per foot, for at least the first 10 feet from the house exterior.
The IRC also specifies that any opening leading outside to a patio or deck cannot exceed 7 ¾ inches. On most homes built on a slab foundation, this is no problem. However, this code may affect patios on a slope or houses with a pier and beam foundation. Patios under these circumstances may require a permit for the steps to get up or down to the patio.
Installing The Truegrid Root System
For example, TRUEGRID ROOT pavers can be added to any plot of land with grass on it. For a grass lot, the TRUEGRID ROOT system uses interlocking pavers that are quickly and easily laid over the level surface of grass. The grass is mowed short, then the area should be thoroughly wet. The pavers are then laid on the grass and pressed into the surface with a heavy or vibrating roller or vehicle. The pavers are then compacted into the ground by driving over them and the parking lot is complete.
The system allows grass to grow through the paver cells and stabilize the area for vehicle traffic without changing the hydrology, drainage or even the natural grass appearance of the site.
Don’t Miss: Concrete Mold Prevention
Avoid The Zoning Fight: The Benefits Of Permeable Backyard Pavers
If you spend enough time around your local zoning board, theres a phrase youll hear again and again: pervious pavement.
Also known as permeable pavement, this material has become quite popular in the world of municipal planning and housing developments, particularly in communities with older stormwater systems or where flooding is a concern.
Municipal codes often enforce an impervious surface ratio, which sets a limit to the portion of a lot that can be covered by impenetrable materials, such as concrete.
This is a lesson many homeowners learn the hard way, when they apply for a building permit at their local municipality, with the intent of building a new patio or driveway only to find out their plans violate their communitys rules for impervious surfaces. A new patio of pavers can throw the ratio of your property out of proportion.
This is where permeable backyard pavers can come to your rescue. These pavers allow rainwater and snowmelt to soak into the ground, helping reduce stormwater runoff and pollution.
The Two Best Methods Of Permit
In these applications, the process of installing either the TRUEGRID ROOT system or the TRUEGRID PRO PLUS pavers is quick and painless and doesnt require any additional drainage or maintenance once its complete.
This means you wont have to worry about resurfacing your parking lot, resealing it, repainting it, or performing any of the common maintenance that asphalt and concrete lots require. Both the TRUEGRID ROOT system and TRUEGRID PRO PLUS are low-maintenance and eco-friendly.
Recommended Reading: Fixing Patio Chairs
Do Elevation Changes Exist In The Proposed Patio Space
This question is often overlooked especially for someone who has never constructed a patio, concrete slab etc. What we are referring to here is whether or not the grade of the existing lawn area gets higher or lower as you move away from the house. Patio surfaces must remain relatively flat. If the patio is extending 30ft out from the house.. and this section is 3ft lower than the house well we are going to have some more work to do. Some projects this can complicate matters. However we love challenges! One of my favorite things to do is to use these elevation changes and create spaces that are both functional and unique. Many times we are utilizing retaining walls to either build up at least a part of the patio or to hold back the ground around the patio to keep it from collapsing.
Adding walls or creating raised patios will no doubt add an additional cost to your project. The flatter the ground.. the less expensive your project will be.
How To Circumvent The Need For Parking Lot Permits
With almost any type of material you want to use for your parking lot, some kind of permit is going to be required before you can start building it. This includes concrete, asphalt and gravel-only. But, what if there was a way to create a permanent lot with durable, high-quality materials without having to apply for any type of permits, no matter your location? Thankfully, on many sites there is.
If you have existing grass, it can be stabilized with a unique paving product to park on without disturbing the natural hydrology of the site. When the hydrology is changed when the site becomes more impervious that is when the city requires added stormwater detention and drainage. But if you can create a parking lot without changing the sites hydrology, then you can pave without permitting. How is this possible, you might ask? Well, theres a simple workaround you can use, provided you have the right products and the right site conditions.
As it stands, there are only two ways to pave without a permit for commercial purposes. You can either use the TRUEGRID ROOT system to stabilize existing grass on your property or you can use TRUEGRID PRO PLUS to upgrade an already existing gravel lot.
Don’t Miss: How To Put Lights On A Patio Umbrella
Installing Truegrid Pro Plus Pavers
An existing gravel lot consisting of loose gravel is a major headache for a business owner. Ruts, mud and dust come with gravel-only lots. There is a one-time solution that doesnt need permitting as no impervious cover is being added.
The TRUEGRID PRO PLUS pavers would simply be installed over the top of the loose gravel after it has been compacted and leveled, with more gravel filled in the cells of the pavers. This provides a stabilized gravel lot that will not compact further and become impervious. Again, in this application, the hydrology of the site has not been changed and no impervious cover has been added.
Do You Need A Permit To Pour Concrete In Florida
4.8/5Permitsrequired
A permit isn’t automatically required to build an on-grade patio, whether it’s concrete, brick or any other material. Requirements vary widely in local governments, ranging from relaxed to stringent.
One may also ask, does a homeowner need a permit in Florida? One of the exemptions to licensure in the state of Florida is when a residential homeowner elects to serve as his or her own contractor. recognize state law requires construction to be done by a licensed contractor and they have applied for an owner-builder permit under an exemption from the law.
Also Know, what requires a building permit in Florida?
A building permit is required for any person or business to construct, alter, repair, or demolish any building or structure. Except in certain circumstances, a building permit must be obtained by a licensed contractor. In some instances, a home owner can secure a building permit as an owner-builder.
Do I need permit for sidewalk?
Yes, You Probably Need a PermitWhether you need a permit for sidewalk repairs will generally come down to where you live. In fact, local county laws, city laws, and subdivision restrictions may differ on the permitting process.
Also Check: How To Build A Deck On Concrete
How Are You Selecting Your Contractor
Here is a great PDF to print off: WHY YOU CAN TRUST UNILOCK AUTHORIZED CONTRACTORS
A landscape project requires dozens of important decisions. Among those decisions are: choosing the right products, the right color and the right style. However the most important decision of all is choosing the right contractor for the job because even the best designs and materials can be ruined by poor installation and workmanship. This section I am going to talk us up a little only because we are one of less than 4 Authorized contractors in the Toledo Area!
WHY YOU CAN TRUST UNILOCK AUTHORIZED CONTRACTORS
UNILOCK AUTHORIZED CONTRACTORS are true professionals who are experienced in proper site preparation, grading, base materials and compaction so you can rest assured that your project will look great and structurally perform for years to come. A Quality contractor will offer:
- Knowledgeable design advice
- A great looking project that stands the test of time
We were HAND PICKED by Unilock
- Workmanship is inspected in progress, and three years after installation
- Business practices are reviewed and proof of insurance is required
- Unilock checks customer references before a contractor is accepted into the program
Getting To The Good Part
Of course, the final goal is to sit on your finished patio and enjoy your new outdoor living space. This enjoyment may include watching your friends and family as you gather or simply enjoying a sunrise as you sip coffee. In either case, such moments are the goal.
We hope that this article has given you a better understanding of permitting and building an outdoor living area for your home. Adding to your homes beauty and functionality is always a satisfying and rewarding experience. Good luck with your project and enjoy your patio.
Dennis is a retired firefighter with an extensive background in construction, home improvement, and remodeling. He worked in the trades part-time while serving as an active firefighter. On his retirement, he started a remodeling and home repair business, which he ran for several years.
Don’t Miss: Do You Need Rebar For Concrete Patio
Do It Yourself Patio Paver Kits
Paver patio kits cost $300 to $1,000 on average and come with instructions, layout templates, and precut pavers to construct a patio, fire pit area, or bar/kitchen area. Paver kits are more expensive than buying everything individually, and base materials are not included.
Another option is to forego buying pavers altogether and pour concrete into a patterned paver mold. Paver molds cost $15 to $100 each, depending on the size.
Will You Need Shade
We always recommend to our clients to consider some kind of shade structure if the living area is in a very sunny area such as on the Southern and Western sides of your house. The afternoon and late day sun will be very intense and can sometimes keep you from enjoying your patio during the hot summer months. Who wants to invest into an area and then not have it enjoyable during the summer months?
The most popular structure is a pergola or arbor which are typically constructed from cedar lumber which is not only beautiful.. but rot-resistant. Pergolas and arbors can also be constructed from other types of lumber, or vinyl if you are looking for a no maintenance solution. Pergolas can be designed to provide more or less shade based on the size and spacing of the slats on top of the structure.
More options exist other than just pergolas and arbors. Pavilion structures are one of our favorites . These have an actual roof and are designed to be more all weather resistant compared to pergolas, sail-cloths, arbors etc.
Recommended Reading: How To Identify Vintage Woodard Patio Furniture
How To Properly Excavate For Your Paver Project
Whether youre installing a new paver driveway, walkway, patio or retaining wall, proper excavation is a crucial first step. It must be done safely and efficiently so each next step can occur as planned. After all, regardless of what your project is, the ultimate stability of the structure relies on its foundation.
Before excavation can begin, you or your landscape contractor will have the presence of buried utility lines located and obtain any necessary permits. Your contractor will mark the locations of the underground gas and phone lines, and stake out the contours of the projects footprint. Then, its time to dig in!
A bit of a mess but its worth it
No two excavation jobs are exactly alike, but the installation of a paver patio, driveway or long retaining wall invariably involves some upheaval, equipment noise and the moving of dirt or removal of debris. Its wise to speak with your contractor and your neighbors before digging starts to avoid unexpected surprises.
The labor and equipment required for the project will be dictated by the terrain and what is being excavated whether its an old concrete walkway or driveway, thick clay soil or loose topsoil.
How deep to dig depends on your paver project
Load varies dramatically from a walkway to a driveway or from a 2-foot sitting wall to a 12-foot retaining wall. While an excavation depth of 8 inches is required for a walkway or patio, a driveway is likely to require at least 12 inches.
Your vision brought to life