Monday, May 27, 2024
HomeBuildHow To Build A Patio Cover Out Of Wood

How To Build A Patio Cover Out Of Wood

Adorn Your Sheltered Zone With Colorful Accessories

How do they do that: Build a patio roof/cover with Douglas wood (part 1)

Add vibrant textiles and mix and match your furniture for a laid-back, summery look

For the ultimate outdoor chill-out zone, treat your covered patio space like you would a room in your house. Were talking comfy garden furniture, outdoor rugs, tactile textures, and bold patterns for a dose of summery fun.

This set-up provides a lovely indoor-outdoor feel, complete with lamps to bathe the scene in a cozy glow once night falls. Training the best climbing plants up your patio cover structure will soften the look and add a soothing touch of green.;

Meanwhile, a hammock strung up beneath the canopy offers a laid-back spot to while away an afternoon. Want to recreate the look? Our best hammock buying guide has lots of great styles.

The 7 Best Patio Heater Covers Reviews And Buying Guide

  • May 5, 2021

Patio heaters can be quite handy to use during winters as they can easily warm up open areas in your backyard or any other open place. But since these get used only during winters, storing them safely during summers is highly important. This can be done using patio heater cover because of the following characteristics of such a cover:

  • Dimensions: Since a heater cover is supposed to completely cover your patio heater, it needs to have the right dimensions that can support your heater. Thus, most of the options out there offer a diameter of 34 inches and a height of 95 inches to easily work with most patio heaters out there.
  • Fabric: Other than properly covering your heater, the fabric of the heater that you are using also needs to be strong and durable. This strength of the cover fabric is given as 200D or 600D fabric, where a higher rating is better in terms of the strength.
  • Warranty: You can also check the warranty offered by a given patio heater cover to get an idea of its durability and warranty. While most options out there come with a 1-year long warranty, other better options might even offer a longer warranty period.

Dont Miss: Build Steps With Pavers

Garden Furniture Centre Picnic Table Cover

  • Picnic table cover, £39.99, Garden Furniture Centre buy here

If you have a picnic table with bench seats, this picnic table cover would provide a better fit than rectangular covers.

It measures L182cm x W160cm x H72cm and is tapered to give it a better fit.

The polyester cover is also UPVC-lined, seam taped and comes with a pull cord to tighten it around the base.

You May Like: How To Keep Birds From Pooping On Patio Furniture

Finishing The Diy Veranda

This takes us up to the finished DIY veranda project. ;Now all we need is some nice decking and furniture to enjoy our new outdoor space and maybe an electric patio heater for cooler afternoons to comfortably enjoy a cup of tea!; But thats for another time. ;Please feel free to comment below and share your experiences.

. ;Ive recently added some decking and guttering which cost an additional £450. ;Its also had a lick of paint. .

If youre not up for the challenge then why not consider one of these alternatives:

Before and after pictures for this DIY veranda. Read about the DIY decking here.

As you can see weve recently renewed the patio.; Read all about this DIY porcelain patio here. The DIY veranda, decking and patio make the perfect combination.

Update August 2020.; Ive recently added a reclaimed wood boardwalk and another decking area to the garden to tidy things up.

Sandwich Framing And 26 Tongue

How to build a patio cover out of wood

The design of this roof resembles traditional post-and-beam construction, but without the headaches of working with heavy, expensive timber and the tricky joinery that goes with it. The posts, beams, rafters and ceiling ties are built-in-place sandwiches of common 2×4, 2×6, 2×8 and 2×10 smooth cedar lumber. The center board of each sandwich is 2 in. narrower than the outer ones, which lends attractive shadow lines and architectural heft to the building.

This triple-thick assembly method makes the framing members very strong, which allows for longer spans and wider spacing between members. This technique allows you to overlap and lock all the pieces together for a very strong framework, easier nailing and tighter joints. And, by assembling beams in layers, theyre lighter to lift. Since the rafters are so beefy, you can space them 32 in. apart. But those wide spans call for a roof decking that can handle those spans. Tongue-and-groove 2×6 decking fills the bill nicely because its very strong, reasonably priced and easy to install. It also looks great on the inside. You can let butt ends of the roof decking fall randomly throughout the roof; its not important that they splice over framing members. But the seams will look more polished if you use a block plane to carve a little chamfer on decking ends where two boards meet.

Also Check: How To Build A Deck Over A Concrete Patio

Plastic Freestanding Patio Cover Idea

Having breakfast outdoor is just a terrific idea to spend your weekend. You do not need to take a road trip to make it true.

You can do it right in your covered patio in your backyard. This freestanding patio features a plastic cover that sits perfectly on the beamed ceiling.

It helps you keep the glare and heat at bay. You can still enjoy your breakfast outdoor even though it is raining because the cover is water resistant.

The good thing about plastic materials is they are usually less expensive than wooden materials.

Therefore, this freestanding patio cover will just make a perfect shade without burning a hole in your pocket.

How To Install An Aluminum Patio Cover

For example, click on this free handy patio cover cost calculator to see what the going rate is for a complete patio cover installed. What about permits when installing the aluminum lattice patio cover. When constructing patio covers building permits are required. That is, in addition to minimum engineering requirements.

You May Like: How To Remove Mold From Fabric Cushions

Fiberglass Freestanding Patio Cover

This all-white patio perches on four stone posts. The rounded white posts look elegant and suit the window trims very well.

The beams feature curvy edges that make the patio look more attractive. And the fiberglass roof is just nice. It protects you from the rain, but it does not hinder you from getting the sunlight.

Expand Your Home Into The Canadian Outdoors

How to Demo and Build a Insulated Elitewood Patio Cover in One Day

Lumon patio covers are a great way to extend the patio season by weeks and months. Most homeowners look forward to using their patio during the summer months. But in reality, patio season is pretty short, especially in Canada.

With Lumon patio covers, you dont have to retreat back inside if it starts to rain or if the sun is too hot. You can transform your patio space into the perfect place to host barbeques or relax with a book.

For even greater protection from the elements, get creative and;combine a patio cover with our retractable glass wall system to create a gorgeous and functional custom sunroom.

You May Like: Porch Vs Deck Vs Patio

Patio Cover Ideas To Spruce Up Your Outdoor Space

Emily Bihl has been writing about fashion, lifestyle, and home décor for more than six years. She received her bachelors degree with honors in English and creative writing from Johns Hopkins University in 2015 and has been creating editorial and branded content ever since. Previously, she has written for Hunker, Brit + Co, Martha Stewart Living, CoolHunting, Fashionista, and Racked, in addition to developing copy for brands like Giorgio Armani, Opening Ceremony, and Steve Madden.

Design: Mindy Gayer, Photo: Vanessa Lentine

Were always looking for any excuse we can find to spend more time outsidebut when springtime gives way to the sweltering sun of high summer, were at the mercy of the shade wherever we can find it. For those who love gathering in the backyard but hate turning lobster red, a patio cover of some sort is a must.

Adding a year-round structure to your patio is a nice option, of coursebut if youre a renter, someone who relocates often, or just not that handy with a hammer, there are other ways to seek out some shade, too. From oversized umbrellas to DIY cabanas, anyone can add a bit of cooling coverage to their home patioand extend the life of their outdoor living room, to boot.

Read on for some of our favorite patio cover ideas, from elegant architectural suggestions to temporary DIY ones.

Design: Maestri Studio, Photo: Aaron Doherty

Aluminum Patio Covers Cost

Price isnt the only advantage Aluminum patio covers do not rot, crack, rust or get eaten by termites. You also get options to customize Alumawood covers to fit your needs and preferences. One can opt for the always popular lattice covers, un-insulated roof or even their 3 thick high-density foam insulated roofing system. The total costs vary between styles, systems and kits.

The installation of these covers is fairly simple even for the DIYer. When purchased as a kit, the covers include the necessary parts for a full installation minus the tools of course. Altogether, the installation time for an aluminum lattice cover say 10×10 for a DIYer is probably 8 hours with a little help.

Lattice patio covers
  • Some HOAs will not allow aluminum to be installed
  • Looks like a kit patio cover
  • Be careful when cutting this material. One wrong cut and you need a new piece.
  • Paint has a gloss to it

A 10 x 10 lattice cover with professional installation goes for around $1800 to $2200.

If you want a 10 x 10 non-insulated Newport cover professionally installed, expect to pay around $3609 to $5020.

The Alumawood 3 thick insulated cover with no add-ons, 10 x 10 installed by a professional will run you between $4608 and $5907

You May Like: Installing A Flagstone Patio

Solid Wood Free Standing Patio Cover Ideas

Ideas for Free Standing Patio Covers. If youâve been browsing different patio cover kits to create a cover for your patio seating area, you may have found that your favorite is a solid wood patio cover thatâs freestanding or one that attaches to your house. Our free standing patio cover kits are the perfect choice if youâre looking to create a little more shade in your backyard, or a …

Visit Our Photo Gallery To View More Patio Covers Designs

Patio Cover with Stone & Cedar

Who wouldn’t want to have a stunning patio that will turn into the entertainment centre for your family and close friends season after season? Make your patio come to life and;create memories on your backyard rain or shine! Browse through our gallery of our patio covers to gather some inspiration to get the ball rolling for your home.;

The project has exceeded our expectations, and we have enjoyed many hours of sitting outside next to a warm fire-table and heater under cover during rainstorms, and now snow. The quality of the workmanship and the great job your installers have done has earned our praise, and the praise of friends that have come over to experience it. And thanks for getting the project done on time for our birthday party, it was the highlight of the evening!

Recommended Reading: Emsco Raised Garden Bed Instructions

Louvered Patio Cover Cost

The cost of a louvered patio cover is between $4,320 and $20,700. This makes the total cost of a patio with a louvered roof between $6,048 and $26,100. Louvered roofs come in many configurations and materials. A roll-formed roof is the least expensive. This is a thinner type of slat material. An extruded roof is the most expensive. This is a more durable and longer-lasting roof option, but costs can approach $100 a square foot if you choose to include all the options.

Selecting Materials To Build A Patio Cover

While looks are important, you want to make sure that the materials fit the structure. Since my patio cover was going to have a slight slope, shingles were out. A tar roof would work, but it would be a heavy smell like a BP oil spill. I decided on corrugated metal roofing because its resistant to high winds, is lightweight, and is structurally sound.

Using corrugated metal also allows me to reduce the degree of slope, or roof pitch needed to a mere 10 percent, or a 1-to-10 pitch. This meant the patio cover could start at the edge of the houses roof at a height of eight feet and slope down to seven feet, leaving a clearance of more than six and a half feet between the lowest part of the frame’s headers and the ground at its outer edge.

Read Also: Cracked Concrete Patio

Crushed Stone Patio Among The Trees

Crushed stone is laid down and tamped into a perfect square within the grass. You can create little corner areas by just adding a few patio stones for a hard surface. This is a very easy design to create with the straight edges. To keep the stones in place you could incorporation a simple brick edging or even flexible rubber edging used in gardens.

Perfectly squared crushed stone patio

Superior Finishes Just Look Better:

How to Build a Grey Freestanding Elitewood Patio Cover

Powder coating is the strongest color finish possible. It is a process that applies a dry powder to raw aluminum, then bakes it at high temperature, which bonds the color to the metal. This ensures even coloring, a perfect finish, and long life. Sure, it costs a little more than standard spray paint, like most patio covers use When it comes to looks, we do not cut corners.

Recommended Reading: How To Remove Sliding Patio Door Frame

Recommended Reading: Paint For Outdoor Wrought Iron Furniture

Rather Watch Us Build Our New Patio Check It Out On Youtube

So lets start from the beginning with the design. My husband wanted the biggest deepest patio we could get with unobstructed views. Our current patio was 30 long and that length was good so that we didnt cover the windows to two of our bedrooms. Our house is already on the darker side and we wanted to keep as much natural light inside as possible. So we knew 30 long, but how were we going to that big of a span without posts in the middle? I didnt think it was possible, but my husband wouldnt give up on it. So I went and talked to an architect friend and he said it would be possible with an 18 glulam. He also suggested adding another set of posts close to the outside that wouldnt block any views but would help balance the look. I totally agreed and is one of our favorite features. He also said we could get away with smaller joists, but because we were leaving them exposed, I went with 3x8s to again balance the look. As far as the depth, we settled on 14 so that we could use standard 16 joists rather than having to up the joist size to 20 and then cut them down to size.

Next up was #DemoDay! It was sure nice to see the old patio go down and that meant things were getting real! I did salvage the wood and made a dining table for the new patio. If you havent seen that build, you can check it out here. It is a real conversation piece when I tell people what I made it from.

Then lastly some paint, lighting fixtures and the patio was ready to be enjoyed.

Where The Patio Cover Attaches To The Roof

More detail about joining the patio cover to the existing roof.

Jed Fisher

This article is accurate and true to the best of the authors knowledge. Content is for informational or entertainment purposes only and does not substitute for personal counsel or professional advice in business, financial, legal, or technical matters.

Don’t Miss: How To Level Ground For Patio Pavers

Installing The Ledger Board

First I removed the 1/4 plywood dressing right below the drip edge and saw a very solid framing 2×4 underneath, perfect for attaching the ledger board, which attaches the cover to the roof frame. The local building code required a 2×6 ledger board, which meant I had to saw off two inches of wood from the top of the bay windows box. Next, I pre-drilled 1/8 holes, 6 inches apart, in the ledger board, because it was treated lumber and the deck screws would need a little help getting started. After attaching the ledger board with 4 decking screws, I used a large staple gun to staple the phone, internet, and cable lines to it, on the inside toward the house, to better protect them from the weather.

Post hole position and completed post hole

Tongue And Groove Freestanding Patio Cover

Patio Cover with Stone & Cedar

This patio is such a great place to spend your afternoon. It can also make a great living room in which you can invite your friends and colleagues to come over for some tea or coffee.

Each post features natural stones that complement the fireplace as well as accentuating the patio.

The tongue-and-groove ceiling creates an epic finish look. Each of the roof sides has a glass window that allows natural light to pass through.


  • Natural stones around each post are the icing on the cake.
  • The tongue-and-groove ceiling makes the patio look more attractive.


  • Installing tongue-and-groove ceiling can be arduous and take a lot of time.

Don’t Miss: How To Keep Outdoor Rug From Blowing Away

Mounting The Patio Roof Ledger

Procedures for mounting a ledger depend on the type of siding on the house. Relatively flat siding can remain intact, but clapboard, beveled wood, metal, or vinyl siding should always be cut away.

If you have beveled horizontal siding, then use an inverted piece of siding, as shown in the illustration here, to create a plumb, flat surface for attaching the ledger.

If your siding is not beveled, you can simply screw the ledger tightly to it.

Remove enough of the siding so you can tuck flashing behind the siding above the ledger and allow it to overhang the siding below the ledger.

When cutting wood siding, adjust the blade of the circular saw so it cuts just the siding and not the sheathing underneath. Also, do not let the blade cut beyond the layout lines. If you are cutting vinyl siding, you can use a sharp utility knife instead.

A ledger should be affixed to strong parts of the houses framing, such as second-floor joists or wall studs. The strongest ledger connection relies on bolts that run through the ledger and the house sheathing and rim or band joist and then are fastened with nuts and washers affixed from the other side. When access to the other side is unfeasible, use lag screws with washers instead of bolts, as shown in the illustration.

If it is impossible to attach the ledger to a floor joist, then fasten the ledger to wall studs, which are generally located on 16-inch centers and doubled up around doors, windows, and other openings.


Most Popular