Wednesday, June 15, 2022
HomeBuildHow To Level An Existing Patio

How To Level An Existing Patio

How To Extend A Roof Over A Patio

A-1 Concrete Leveling Pittsburgh – Concrete Patio Repair
  • Get link

How to attach a patio roof an existing house diy pj fitzpatrick.

Invite over friends and family, have a barbecue and enjoy the products of a patio extended with pavers provides plenty of room for table, chairs, and endless possibilities for.

Building permits, city and neighborhood code restrictions, dealing with subcontractors, liability insurance, and other factors can complicate matters for most homeowners.

Design a roof extension over an existing patio.


How to build a kidney shaped patio and sitting wall.

Existing patio is outside the dining room on the west side of the house.

There are many variables that go into replicating your existing roof to extend it over the patio.

Adding a roof or covered area to your patio will give you more protection from the elements, such as pool season might be long over, but you can still enjoy the water even when the air is frigid.

Adding a patio roof to your existing home can create a nice look that effortlessly flows out from your homes roof.


Discusses roof tie in and other renovation considerations. Remodeling and general remodeling services in bozeman 59772, livington 59047, belgrade 59714 , manhattan 59741, clyde park 59018, callatin gateway 59730, emigrant 59027, wilsall how to attach a patio or verandah to a house. Design a roof extension over an existing patio.

Extend the roof over your new patio extension. Build an arbor or pergola and cover with vines. Use interesting details like vases, unique plants, etc.

Are You Ready For A Free Concrete Jacking Estimate

Replace your uneven patio instead of getting mudjacking, and youll be paying a higher price for a less effective solution. If that doesnt make sense to you , contact a reputable local professional concrete repair contractor and request a free mudjacking consultation.

Lift Right Concrete, the leading northern Utah mudjacking and concrete repair company for over a decade, has a reputation for expert workmanship, exceptional customer service and fair, competitive pricing. If you have a sunken slab or cracked concrete anywhere on your property, were the team to call.

The professional contractors at Lift Right Concrete offer free, no-obligation project evaluations and estimates to homeowners and businesses in the greater Salt Lake City area. If you have an uneven patio, contact our West Jordan or Grantsville office and schedule a concrete jacking consultation today.


How To Make A Custom

To get this nice, new, and level spa pad, youre going to build a box frame out of lumber and fill it with gravel to create a level area for your hot tub. Custom-built means just that. For starters, youll need to calculate a few key things:

  • Slope measurement: how out of level is your existing concrete pad?
  • Amount of framing materials needed: 2×4 pressure-treated lumber and screws
  • Amount of sand or gravel needed to fill the frame

Build a Box

Using the 2×4 lumber, build a box frame that is approximately one inch wider than your hot tub base. Each piece of wood should be ripped and tapered on the bottom so that when the entire box is built and placed on the uneven surface, the top boards are level all the way around.

  • Pro Tip # 1: Its critical that you use pressure-treated lumber to ensure that your new pad will stand up to the weather and any moisture around the hot tub.
  • Pro Tip # 2: Drill several holes along the lowest board on the long side this will allow any water that splashes out of the tub or puddles after a rain to make its way down through the gravel or sandand drain out.

Fill the Box with Gravel or Sand

Once youve built the box and fitted it to the sloping concrete, fill it with enough pea gravel or sand to come within an inch of the top this gives you a sturdy base to put the hot tub on.

Paint or Stain the Wood

Also Check: How To Paint Wrought Iron Patio Furniture

Why Does The Patio Crack

The main issue with outdoor concrete patios is that they settle or sink. When the concrete patio sinks or settles, this occurs unevenly in different sections. This results in wobbly, unstable, and uneven concrete surfaces. When the concretes weight is not supported uniformly from below, concrete cracks start to form.


If you leave these issues unattended to and let the cracked concrete patio remain in this condition, your furniture may be unstable and walking on cracked concrete can stub your toes. Overall, you will have an unsightly concrete patio.

How Much Does Mudjacking Cost

To.over Wooden Patio Floor : How To Remove Green Algae ...

If you find your patio is sinking or has become uneven, concrete leveling is probably the solution. From the looks of it, you may think that all that is needed is to mix up some concrete and add it to the spot that is uneven. However, the fix is not as simple as that. The issue may lie underneath the concrete slab, meaning a more complicated fix is necessary.

One way of addressing the issue is by leveling the concrete in a process called mudjacking. According to The Spruce, mudjacking costs between $3 to $6 per square foot. It gets its name because the concrete will be “jacked” up by injecting a mud-like slurry of cement, topsoil and water underneath the concrete that has sunk.

In this process, holes are drilled into the existing concrete, and the slurry is pumped into the holes. The slurry then lifts up the concrete surface from underneath, leveling it to its original height. Mudjacking is best for concrete that is not normally holding large weight loads like patios, outdoor kitchens, driveways, sidewalks, steps and decks. It has a curing time of 24 to 48 hours and lasts for 5 to 10 years.

You May Like: How To Build A Deck Over A Concrete Patio


Why Does The Concrete Patio Settle

In the first place, why does the concrete patio settle or sink? Before the concrete is installed, the ground is prepared and the earth is compacted using heavy machinery. Typically, the compacted surface usually comprises of gravel or it will have at least a layer of gravel. This is usually done to prevent the ground from sinking because of the weight of the concrete patio that is installed above.

Settlement can occur because of weather conditions or the soil below it eroding due to rainwater. It may also occur if the compacting is not done thoroughly or properly.

Purchase A Spa Leveler

A spa leveler can be used for a hot tub out of level by any measurement but is particularly appropriate when the uneven slope is greater than an inch. Several adjustable feet allow you to customize the spa levelers height based on the slope youve got to deal with.

If your hot tub is already in place, move it aside to put the spa leveler in the right place. Youll need to know how far out of level your concrete pad is so that you can adjust the feet accordingly before reinstalling the hot tub on the new leveler.

While a spa leveler is a pricey option, typically costing close to $600 plus shipping, it is constructed to last. The design allows water to drain away from underneath, so you dont get wood rot or mildew under the tub.


An added benefit is its portability. If you ever need to move the hot tub, a spa leveler can be relocated and then releveled to the new spots contour by simply adjusting the feet again.

Recommended Reading: Patio Furniture Webbing Replacement

How To Calculate Patio Slope

There are different ways to calculate the slope for a new patio. The easiest way is to measure the distance from the building to where the outside edge will be and multiply it by 1/4 or 0.25 for a 2% or 1/4 per foot drop.

  • For example, a 20-foot patio run multiplied by 0.25 calculates the patio fall to be 5 from one edge to the other.

To calculate the slope of an existing patio, use a 2 or 4-foot builders level. Place the level on the surface, lift the end furthest from the structure, and measure the distance lifted to make it level. Divide the distance by 4 with a 4-foot level, and 2 with a 2-foot length to determine the fall per foot.

  • For example, using a 4-foot level results in a 1 lift, 1 ÷ 4 = 0.25 or 1/4 or 2% fall per foot. If the lift is 1/2 when using a 2-foot level, 1/2 ÷ 2 = 1/4 or 0.25 or a 2% slope.

Read Also: How To Identify Vintage Wrought Iron Patio Furniture


Stylish Beige Patio Roof

Pouring Concrete For A 2 Level Patio Slab

This patio roof complements the exterior very well. The soft beige color provides a relaxed ambiance to the patio so that it can be a great place to call it a day.

The pergola style allows natural light pass through which makes the patio shaded partially. You will not miss the warm of the sun when sitting in the patio.

Dont Miss: How To Remove Mildew From Patio Furniture Cushions

You May Like: How To Identify Vintage Wrought Iron Patio Furniture

Adding A Retaining Wall

Mix the ideas we have mentioned above with a beautiful retaining wall. Its a great way of adding texture and forms a wonderful place for planting flowers.

There are also other additional design elements that you can implement to make your cracked patio look better and include:

  • Outdoor string lights
  • Garden arbors

Snap A Base Line And 2 Perpendicular Lines

Snapping chalk lines directly in the sand is the best way to keep your bricks running straight. For the running bond pattern, youll only need a baseline and two lines perpendicular to the baseline, offset by half the width of a brick. Mark the rough center and snap a line at right angles using this method:

  • Measure out an equal distance from the center and make two more marks .
  • Cross two tapes at the same measurement .
  • Snap a chalk line from point D through point A.
  • Then snap a second line half the width of a brick from the first line.
  • Recommended Reading: How To Attach String Lights To Patio Umbrella

    Pouring A Primer Coat

  • 1Purchase concrete with a fine aggregate for small repairs. Aggregates are additives that make up most of a concrete mix. Fine aggregates are typically sand or crushed stone. This type of mix is best for pouring a very thin coat of concrete, such as when topping off or leveling out an existing slab.XResearch source
  • The aggregate in a concrete mix is listed on the label. You can also see it when you open the bag. Fine concrete looks smooth or has very small stones.
  • Concrete is generally a mixture of cement, sand, gravel, and water.XExpert Source
  • Hill Country Patio Covers

    Level Concrete Patio for Drainage
    • We work hand-in-hand with our customers to achieve covered patio building excellence for all of our customers.
    • Our covered porches provide a comfortable space to entertain and enjoy the outdoors.
    • We can build a new outdoor shade structure to attach to any home, install a freestanding porch cover, or extend any existing covered porch roof.
    • Custom lighting options are available to customize any project, including ceiling fan installation, recessed lighting and outlet installation.
    • Our metal awnings & deck covers provide shelter from unpredictable weather conditions.
    • Aluminum structures cost less than wood so a metal design will save you money.
    • Our Alumawood covered patios require little to no maintenance.
    • Alumawood covers look and feel like real wood, without the upkeep of genuine wood.
    • Metal and aluminum covers will not mold or mildew, which is important with San Antonios climate.
    • Aluminum porch covers will not crack, deteriorate or require painting.
    • Insulated roof panels will help keep your Austin patio cool.

    Covered Porch Design Ideas

    • We will work with you to build your dream covered patio or carport within your budget.
    • Tell us what you desire and we will build a patio structure for your backyard to accommodate your wants and needs.
    • Our metal covered porches are resistant to damaging weather due to the quality of material used.
    • Each patio & deck cover project that we build comes with a lifetime warranty.
    People also ask

    Read Also: Patio Cover Ceiling Fan

    Level Sand With A Trowel And A Straight Piece Of Wood

    Level the sand using a trowel and the straight end of a piece of wood. We are using a 2×2 scrap wood because it happens to be the exact same thickness as the pavers we are leveling.

    Running the piece of wood back and forth allows you to evenly distribute the sand in the area. Also with this board being the same thickness, it provided a guide for how much sand should be applied. When the height of the board reached the string we had in place we knew we were on target with the right amount of leveling sand.

    This is where using a level is critical. Using the Empire 16 in. True Blue Digital Box Level we were able to gauge how level the ground was and measure the degree of the slope as we extended down the patio. The True Blue Digital Box Level has an audio indicator that would beep as we approached a level surface.

    This tool makes make this task seamless and quick.

    Create Your Own Cliff

    Not everyone gets to have their own personal cliff in their backyard. It looks like this yard had a nasty drop off the owner used to create the look of mountain cliff by using the structured planting of trees in the back and shrubs up front. Using rocks and slabs for the steps keeps the illusion alive.

    You May Like: How To Replace Webbing On Patio Chairs

    Fastening A Patio Roof To The House

    Expert advice on how to attach a patio roof to a house, with step-by-step instructions and construction diagrams.

    A house-attached patio roof takes advantage of the houses structure by supporting one end of the roof on a ledger mounted horizontally to the house. The ledger, typically a 2 by 6, is usually designed to hold one end of the patio-roof rafters. Locating and mounting the ledger is normally a fairly easy process the ledger should be attached before the foundation is built for a deck, patio roof posts, and other structure.

    You May Like: How To Identify Vintage Wrought Iron Patio Furniture

    Can I Pour Cement Over Cement

    Pouring Concrete Over Existing Concrete (New Patio Slab)

    Yes, you may pour a concrete pad overlay over an existing slab. You need to consider the added height and weight of the overlay on the existing structure. Overlays may include polymers, portland cement concrete, or epoxies. You should improve the drainage of the slab by having a good slope on the overlay.

    Recommended Reading: How To Remove Sliding Patio Door Panel

    Plan Ahead To Avoid Construction Headaches

    You can add this screened in porch to almost any house, but attachment details may vary from what we show here.

    • On most two-story houses, you wont have to worry about tying into the roof, but you may have to situate the porch carefully to avoid covering a window.
    • The house roof sloped 5 in. per foot and extended 18 in. at the overhang. Your roof may vary from this, and the details of how the porch ties in will vary as well.

    These illustrations above show the plans for the screened in porch, deck framing, gable framing, ledger, truss block, side walls and the end wall. To print these how to build a porch plan, see Additional Information at the end of this story.

    How To Mark Off Your Patio Area

    Place a stake at the corners of the area for the patio and tie mason string to mark off the area.

    Prep the Area

    Watch video of this step.

    When considering where to build a patio, choose a flat, level area. Then have your local utility company come out and make sure the area is free of underground utilities.

    Next measure the area, so you can order the right amount of materials. Our area is 11 x 11 square.

    Once you have the materials, do a dry layout of your design . Do this in any level part of the yard. Play with the pattern and design, see what works and make sure you have enough materials.

    At your patio location, measure the area and pound four stakes into each corner. We did ours 12 square 11 square plus 6 on each side for edging .

    Tie mason string to mark off the square . Measure diagonally across the stakes from opposite corners to make sure the patio area is square.

    Dont Miss: How To Build A Patio Storage Box

    You May Like: How To Install Ceiling Fan On Insulated Aluminum Patio

    Repairing Concrete Slab Q& a

    Be sure to scroll down… there may be more than one question on this page!

    Dear NH,

    My concrete driveway and patio have sunken slightly and water puddles whenit rains. is there a way to level it off? I was thinking of using a cementproduct which will adhere to the existing surface without having to replace thewhole drive and patio?

    Dear J,

    Adding a layer of cement to your driveway and/or patio is one option. Thereare a number of cement products that can be used from plain old concrete mixto special Portland cement mixtures that can be applied as an almost paper-thincoating over existing work.

    There are a few preparatory steps you should follow to assure the bestadhesion of these products. First, the surface of the old work should be cleanedand roughened slightly. Concrete becomes harder and less porous as it ages.Chemical concrete cleaners containing phosphoric acid will both clean andslightly etch the surface and increase adhesion between the new and old work.The use of muriatic acid, a more powerful acid, is more efficient but much moredangerous to use. There is an article at the website on muriatic acid at.You can decide for yourself if you want to work with this product.


    RELATED ARTICLES

    Most Popular