Wednesday, June 15, 2022
HomeBuildHow To Make Concrete Patio Look Like Marble

How To Make Concrete Patio Look Like Marble

Concrete Stain Concentrate Review

How to paint concrete patio with Behr Granite Grip floor covering
  • The Shortest and Easiest Route…
  • WRC stain is ideal for…
  • Get Marbling Mottling…
  • Offers multiple colors and sizes.
  • Easy to mix and apply.
  • Quick-drying time.
  • Not too dark.

This particular stain is manufactured by Concrete Resurrection that offers several colors to choose from.

Using this stain is a breeze. You need to mix the stain with water, and you can use any pump-sprayer to apply it.

Its quite reasonably priced too.

How Do You Stain Concrete To Look Like Marble

Answer: The best way to bring a marble look on concrete is acid staining. Like every other concrete staining procedure, first, prepare the surface. Mix concrete cleaner and degreaser, scrub the surface, and then dry the surface with a mop or vacuum.


Next, apply the acid stain using a pump-up sprayer or simply pour it from a bucket.

After applying the stain, seal the surface to ensure its longevity.

Concrete Countertops Apple Valley

There is no better material out there today that features unparalleled durability, adaptability and overall cost-effectiveness than concrete. This is the reason why concrete countertops are making waves in just about anything related to interior design. Concrete countertops can transform your kitchen from drab to fab through the application of coloring and staining methods. It is a sure fire way to infuse your home with a rustic but modern look that is not only trendy but clean at the same time.

Concrete countertops can be customized into any shape in order to fit any kitchen configuration. No matter how big or small your space is, we can create a countertop perfect for you. Concrete is also very resistant to scratching and is not affected by heat. It is easy to clean and maintain. All you need to do is ensure that regular sealing is done.

You May Like: Difference Between Porch And Patio


Roll On Accent 1 Warm Gray With Faux Roller

Now it gets really interesting to watch! Once the Base coat is on its time for the first faux finish coat. This color is Warm Gray and will add a lighter faux finish on top of the charcoal base coat. The faux finish roller should be lightly misted and damp when you start. This is when you should watch the video that Daich has out, since this part is a little intimidating. Dip the roller in the paint, roll it a bit to get some off and then lightly put the roller down and roll it towards you and youll see the roller do its thing.

They recommend that you roll back and forth in an X and overlap until the color starts blending together. Its going to look splotchy and scary, but I promise it all comes together in the end. I had some areas that were heavier and some lighter. You could see that the roller was leaving marks which gives it a stone look and thats what you want.

Heres that part all done. It just looks like the light gray tones down the charcoal and gives it more texture and pattern. But you can see some areas are heavier than others.

I took several pics of this so you can see it from different angles.

I was already liking it a lot! I knew the other faux coat would make it look even better.


Can You Stain An Existing Concrete Patio

How to Stain Concrete Patio to Look Like Stone? [Full Guide]

Stains are effective in revitalizing dull, lackluster surfaces with minimal to no damage. An existing concrete slab with major cracks or spalling is usually not a good candidate for staining because any patchwork is likely to show right through the stain.

Like stains for wood, concrete stains are semi-transparent and are intended to enhance rather than disguise the surface. They will not hide cracks, blemishes or other flaws in existing concrete. Nor will they completely mask an underlying color or conceal the texture of the surface.

The Concrete Studio in Dallas, TX.

Recommended Reading: How To Prevent Patio Furniture From Blowing Away

How Do You Paint A Concrete Patio To Look Like A Stone

Answer: First, dry clean the patio and tape off the area you dont want the paint to be touched.


To make things simple, use tape on the entire surface to create segments like a stone.

Buy quality stone color paint of your choice. Apply two coats of paint using a nap roller or a paintbrush between the segments youve just created.

Between each coat, give the surface ample time to dry.

Compact Kitchen With Extra Design

Concrete countertops are ideal in a small kitchen like this. They provide a neutral canvas for the dark wood cabinets and shelves. This kitchen is anchored by vertical concrete accents that give the kitchen more depth and character. This kitchen may only comfortably fit 1 or 2 people, but then when it looks this great, who cares? Heres a collection of small kitchen space-saving tips.

Recommended Reading: How To Identify Vintage Wrought Iron Patio Furniture


Concrete Pool Apple Valley

Very few investments make a statement like a concrete pool. Indoor or outdoor, your Apple Valley pool area should be uniquely your own. Make it happen with Lowell Russells stamped concrete and border designs. Your investment is worth too much to not use the best. We know that your concrete pool project is unique, challenging and important because of that, we would like to offer our help. Please contact a professional from Lowell Russell Concrete, a Apple Valley, MN based business, to find out how our services can to create a pool area that will not only look great but will be durable for years to come.

Concrete pools are highly customizable and puts you in control of whatever design you like based on the topography of your property. It not only allows you the design freedom to think of whatever shape you want it to be but it also gives you the flexibility you need to design a swimming pool that can match the current theme and d├ęcor of your backyard and home. Compare that to a fiberglass pool, which is already pre-made in one piece and only comes with a limited availability of colors. If you have a concrete pool you can get the tiles you want in order to add color and personality for this area of your home. You can also easily match it with the tiles of your patio as well as the surfaces of the swimming deck.

Types Of Floor Coatings

How to Stamp Random Stone Concrete Patio Pattern! DIY

When applying a floor coating, it is important to find a paint or stain formulated for the area and type of surface. Products for outdoor application, like concrete paint, are made to withstand more extreme temperatures and harsher wear. A coating made for basement floors may not serve as the best garage floor coating. It may not offer the protection and have the resilience needed to coat a garage floor.

There are three main types of floor coatings: paint, stain and epoxy. Each type of floor coating has its own benefits, best surface applications and best application techniques.

Tip: When working with any type of floor coating, ensure you have plenty of ventilation. Keep children and pets away from the affected area until the coating has completely dried and any fumes have dissipated.


Don’t Miss: Diy Brick Patio

Gather Materials To Stain Concrete

Use the manufacturer’s color chart as a guide to selecting your color. There are different levels of coverage in the various stain options. For this project, we’ve used a semi-transparent stain that looks like watercolor when applied. For more coverage, go with an opaque stain. Do a small test area on the concrete to make sure you’re going to get the results you want. Always read the manufacturer’s instructions on the container for any special considerations when using their product.

Use the manufacturer’s color chart as a guide to selecting your color. There are different levels of coverage in the various stain options. For this project, we’ve used a semi-transparent stain that looks like watercolor when applied. For more coverage, go with an opaque stain. Do a small test area on the concrete to make sure you’re going to get the results you want. Always read the manufacturer’s instructions on the container for any special considerations when using their product.

How To Paint A Floor To Look Like Marble

1

Prepare the floor for painting. For wood floors, remove any paint or varnish by sanding the floor with a drum sander – available from tool hire companies. Fill any cracks with a wood filler and allow the filler to harden before sanding a second time. Vacuum the floor to remove dust and debris, and wipe down with a damp cloth or mop. To prepare a concrete floor, vacuum thoroughly and clean the floor with a solution of one part water and one part bleach. Mop the floor with clean water and allow to dry. Apply a dedicated concrete and masonry primer and allow to dry thoroughly.

2

Tape along the bottom of the walls or baseboard with masking tape or painter’s tape.


3

Apply a base coat of white satin paint. Ensure you work from the far side of the room toward the door so you don’t have to walk over the freshly painted floor. Allow the base coat to dry thoroughly. Apply a second coat if necessary.

4

Mix the two glazes. Take the first shade of satin paint and combine one part of the paint with one part untinted glaze and one part water. Repeat in a separate bowl with the second shade of satin paint.

5

6

Apply the white satin paint to a small artist’s paintbrush. Paint characteristic marble veins on the floor. Use a clean brush to soften the lines and blend them slightly. Allow to dry.

7

References

  • Always work in a well ventilated area.

Writer Bio

Also Check: How To Level The Ground For Pavers

Seal Over Tape With Primer

A tip I got from Peter Daich was to then go back with a brush and seal down the tape lines with the primer again. This ensures that there will be minimal seepage of the next coats of paint under the tape. The tape stays on until all of the layers are completed and comes up just before the clear coats go on. Marks red rolling stool helped my back a lot on this process! I rolled around the patio painting lines.

Once they are all painted over, the tape disappears, but its going to do its job under there and give me a gorgeous look when finished. This is a layer by layer, step by step process, but I think its totally worth the effort! I would do it again in a minute.

Taped and ready for the next coat.

Roll On Accent Color Mud Gray With Faux Roller

Wood Planks For Outdoor Concrete Patio

So next I used Mud Gray, the 2nd accent color using the same method with the faux roller. It has a muddy brown tone and really smushes all the colors together giving it more of a real stone look. The roller has those little tails on it that move the paint around and gives it that stone look.

I loved it already just from this look and knew that once the tape came up it would look great. The 2nd color really gives it more depth and a little more brown tone which I love because it goes well with our siding color.

You May Like: How To Build A Fire Pit Patio With Pavers

Special Savings Today Only Click For The Deal Of The Day

There is more information here about how to create ‘liquid brick‘ using this concrete dye and

We used inexpensive nylon brushes that lostbristles now and then but are tough enough to be scrubbed into concrete for hours.

We absolutely love these brushes by Plaid because they are both inexpensive and durable!

This porch is about 300 square feet, and took about a 40 hours to clean and marbleize .

Here’s how the project began: For a long-lasting finish, we cleaned with muriatic acid. That’s a tricky process. Once again you can read about that, here.

Testing colors of concrete stain came next:

Concrete Staining Cost By Type

There are two basic types of concrete stains:

  • Acid-based stains contain hydrochloric acid and metallic salts. These elements react with the calcium hydroxide in the concrete to produce coloring. Their color palette consists mainly of earth tones, and they produce a marble or mottled appearance.
  • Water-based stains consist of water with polymers and pigments that are added to create the color. They have a more extended color palette and produce a uniform effect.

You May Like: How To Anchor A Gazebo To Pavers

Apply Two Coats Of Clear Epoxy

Apply the clear mixed epoxy after the color coat has dried. Let it dry.

Then, sand lightly with 220 grit sandpaper. This will create a tooth so you can double coat the clear resin. Wipe off the dust with a paper towel.

Finally, apply another layer of clear epoxy coat. It will take about 3 ounces per square foot. You can use 1/8-inch by 1/8 inch square notch to level the application.

If youre using a marbling kit, like an Italian white marble project kit, it will self-level as it cures, so you wont need to use a trowel. It also comes with a heat gun that you can use to prevent bubbles.

X To View This Video Please Enable Javascript And Consider Upgrading To A Web Browser Thatsupports Html5 Video What’s New At Toolassociatehow To Stain Your Concrete To Look It Like Marble

Faux Flagstone Patio | Hometalk

When the concrete stain is applied over the concrete surface it reacts with the cement and gives a shiny look just like a marble surface. After the application of concrete satin, it lasts for a long time without fading of peeling the color.

There are few steps needs to be followed while staining our concrete to make it look like a marble surface. The main aim is to use the concrete stain but before using that some perpetrations are required. The preparations are mentioned in the steps below,

Recommended Reading: How To Get Rid Of Patio Flies

Applying The Concrete Stain

Applying concrete stain is another plain sailing task here as the stain Im going to recommend needs only water to mix with. It would help if you had a simple sprayer to apply the stain on the surface.

I recommend this cost-efficient stain from Concrete Resurrection. It offers so many colors of stain and multiple sizes to choose from. No matter whether you like darker colors or some lighter colors, this stain covers them all.

After mixing the stain with water, start spraying the entire surface.

For the first coat, give it a light coat. For the second coat, give a little bit harder coat and highlight some of the stone segments to make them stand out from the other stones. It will make it look more like a stone.

For the third coat, you can apply a different color of the same stain to bring some color variation, or you can skip applying the third coat entirely.

Let the stain dry properly. Then move to the next step without making any delay.

Roll On Clear Coat Sealer

This section is the second section I went on to. I remembered to take a pic of putting on the sealer. It goes on milky white and dries clear. Youll want to add 2 coats of clear to finish it off. These 2 coats go on fast!

And heres a shot from above of the first 2 sections done. I am in love with it already and Im so happy I tackled this labor intensive time consuming project. I sweated a lot doing the first section, but it had started to cool off by the time I got to the second section.

And now Im moving on to Section 3! I definitely didnt think Id get it all done this fast, but the weather cooperated and so my energy level was up and I just kept going. Im so glad I got it all finished just in time for Fall and Winter. Some of these pics are better than others but you get the idea.

On to Section #3!

I got out our Ryobi pressure washer and cleaned that section thoroughly. I love this machine, I can start it myself! I let it dry overnight before starting, then did the primer and taped it off.

Base coat time.

Above shot after base coat is applied.

Already primed and taped off under there.

I taped around the faux stone wall we put up last year since I wanted to protect that and the house. You cant see the tape, but its there.

Faux 1: Warm Gray

After Warm Gray application.

Faux 2: Mud Gray

It looks so good with the wall!

As you can imagine, Im over the moon happy with our patio now!

Heres the link to Home Depots 100 s.f. kit and 400 s.f. kit.

Please Pin for later!

You May Like: Black Spot Lichen Remover

Techniques For Concrete Stain Faux Finishes

    Concrete is not a particularly nice looking material but it can be livened up by creating one of several faux finishes on its surface. Concrete is very hard and resists cracking but it is drab and unpleasing to look at. Faux finishes can be applied to the concrete to change its drab appearance. A faux finish is meant to make one material look like another. Applying faux finishes to concrete could make it look like granite or marble. The article below will provide a general walkthrough on how faux finishes are applied to concrete and how you can create certain looks.

    Step 1 Choose the Faux Finish

    When working with concrete the faux finishes are limited because you do not want to make concrete look like wood or bamboo. The safest selection is to change concrete into some other type of stone material. Slate is by far the easiest because the color of slate is close to that of concrete with minor differences in color. To go with slate you will want to use black paint along with dark gray and standard gray. If you would like the appearance of soapstone you would choose white, light gray and dark gray paint. You can even make it look like limestone by using pastel pink, light gray and cream paint colors. Examine several styles of stone and choose paint colors that match the colors of the stone. The process to create faux finishes is the same regardless of the stone you wish to create.

    Step 2 Clean

    Step 3 Base

    Step 4 Layout

    Step 5 Faux Finishes


    RELATED ARTICLES

    Most Popular