Build The Gracious Lake Tahoe Gazebo
Extend your home’s living space into the garden with an elegant and easy-to-build eight-sided redwood gazeboa pleasant outdoor retreat for social gatherings or soothing private reflection. This project requires careful planning and measuring during construction of each of its main components: layout, posts and footings, decking, frieze, rafters and roofing, and railings.
If you are a relative newcomer to DIY projects, follow the construction steps presented here and seek help whenever you are unsure of the details. More experienced DIYers will feel comfortable with this basic design and will find several areas to add personal touches. A few ideas for frieze, railing, and roofing options are offered.
Use only corrosion-resistant hardware. Check local building codes before planning construction.
Design Plans For Your Grillscape
- the-grill-outdoors.com
- Summary: The Walleye has an angled roof, to protect you and your outdoor grilling equipment from the elements. It can be built to stand stationary or with casters for
- Matching search results: Be the envy of your neighbors when you build The Walleye grillscape. At approximately 2-7 deep and 6-0 wide, this grillscape is designed to house a 22 kettle grill, but it could easily be altered to house a Kamado Joe, Big Green Egg or
Nail The Roof Decking
- Nail the roof decking to the rafters with 8d nails.
- Be sure to screw the steel strap to the lower roof boards for extra support.
- The strap ties the narrower boards together to prevent sagging.
- Cut your lower fascia from 1×10 cedar. Hold it 7/8-in. above the ends of the rafters so your roof decking will be flush with the fascia.
- Rip 5-1/2-in. decking in half for the first seven courses so theyll be able to bend around the lower curved section.
- Cut each end of the decking at 22-1/2 degrees for the first course and change the angle slightly until you finally reach about 16 degrees for the rest of the full-width courses.
Family Handyman
You May Like: Best Backyard Mosquito Control Systems
How To Build A Gazebo
Building a gazebo is a great project for the new handyman. The correct tools and some tutorials will give you the confidence to start your own project. This instructable will demonstrate the easier way to get started. In the tutorial above, you can see how the creator built a typical gazebo in his backyard. Right, so you’ve seen all those lovely gazebos and you’d like to know how to build your own. Well, we’re going to show you how it’s done. I’m just going to walk you through a simple timber frame design. We chose timber frame as it is a great way of doing this if you want a solid structure but one that is still lightweight.
How To Build A Great Gazebo
Whether custom designed or built from a kit, a backyard pavilion provides a perfect place to unwind.
Say gazebo and what springs to most people’s mind is an octagonal white garden building at the end of a long sweep of lawn. Although many gazebos do fit this traditional gingerbread-trimmed image, today’s versions are just as likely to be square, rectangular, or round have sleek lines and sit close to the house, to encourage outdoor dining. They can even be built right into a porch or onto a deck, patio, or pool surround.
Related
Recommended Reading: Free Standing Pergola On Concrete Patio
Diy Gazebo Plans Free
Build yourself this great gazebo for your backyard for less than $100. Moreover, you will not require any special experience to build it. It’s an easy-to-build structure that you can use to relax during summer afternoons. Most materials necessary for the construction process can be easily found at your local store. All of them come at affordable prices and are sturdy enough to withstand any weather condition.
Tips For Building A Gazebo From A Kit
Perhaps the most popular option for putting up a gazebo these days is buying a prefab kit. Pieces come precut, often with the largest components preassembled in sections, no sawing required. Less expensive kits are made from pressure-treated fir or pine, while higher-end models are made of weather- and rot-resistant cedar. All fasteners should be included. Thanks to precision cutting and fitting, kits can deliver extremely well-engineered structures.
Support columns are typically held by gusset plates bolted directly onto the foundation piers, deck, patio, or concrete floor. Sections bolt together through predrilled holes smaller pieces screw together. Designs range from simple square latticework structures to octagons dripping in decorative millwork and capped by a two-tiered, cupola-topped roof .
Most company literature says that a couple of people can put together a small to midsize model in a day or two with just a cordless drill, a wrench and sockets, and, in some cases, a hammer and a nail set. That time frame may or may not include the groundwork. For most homeowners, the hardest part is the foundation. Typically that requires digging and pouring concrete piers around the perimeter and one in the center for an octagonal structure, nine footings.
Recommended Reading: Christmas Decor For Front Porch
The Pointed Square Gazebo
This gazebo is the mélange of both traditional and modern style. You can add modern touches to this wonderful gazebo style easily and if you have small space in your garden, then this is gazebo design is perfect for you. Moreover, the pointed roof and square gazebo shape of this gazebo make it easy for you to construct even by individuals with little to no knowledge on carpentry by simply following the instructions carefully. You can make this gazebo as your tea/coffee space to enjoy the beverage of choice in the morning, day-dreaming in the cool breeze in your own garden. Needless to say that the construct is also an extraordinary visual treat.
The Shaded Gazebo Design
What a lovely place to relax in! This is anairy gazebo that houses a few chairs and a comfy sofa with soft cushions readyto lull you to sleep. This gazebo was built on a raised wooden deck. The gazebohas an open design but with balusters built around the wall of the structure.The eight narrow posts hold the roof with delicately shaped braces on each sideof the posts.
The triangular roof is made of woodenslats the roof finishes off with a pointed design. This gazebo was stainedusing a natural wood stain. Hanging flowering plants make the gazebo lively,fun and inviting. This may look complicated because of the triangular roof but itactually is an easy build.
Recommended Reading: How To Build A Raised Garden Bed For Patio
Cut The Posts To Length
- Bolt posts to the steel strap anchors. Heres how to do it:
- Make the anchors by cutting 12-in. lengths of 1/8-in. x 1-1/8 in. steel and boring 7/16-in. dia. holes into them as shown in Fig. B.
- Pro tip: You can find steel stock next to the threaded rod at your home center.
Family Handyman
How Much Does It Cost To Build Your Own Gazebo
Most homeowners spend between $5,358 and $9,058 to build a gazebo. The average cost to build a gazebo ranges from $5,358 to $9,058, with most homeowners paying $7,587. Costs can rise to as much as $27,000 or more to build an intricate custom gazebo. Some homeowners may pay as little as $325 to build a gazebo via a kit.
You May Like: Gas Fire Pits At Home Depot
Assembling The Patio Gazebo Frame
The first thing we did was set up the sawhorses and top it with a sheet of plywood to use as our workbench. We needed a large surface to assemble the four fascia boards that connect the posts.
This is where youll first need the bar clamps. The patio gazebo kit comes with all the holes pre-drilled and I am happy to say that they all lined up perfectly. Plus the connectors are two sided so they suck together creating a really tight fit.
Once all the fascia boards were assembled it was time to put of the frame. They recommend four people for this project but we did most of the work with just the two of us. More on that in a bit.
We assembled the back side of the gazebo first while it lay on the patio. After standing it up we used used a little construction trick to hold it up while we worked on the third pole.
Its amazing how well one small board nailed to two surfaces acts as a third worker
We got the third and fourth posts in place and attached the fascia provided bolts and your crescent wrenches. Dont tighten completely until make sure everything is level and square before the final tightening. See their video series for the proper way to ensure square.
Since we were working with just two of us we spent way more time getting everything squared up properly. It can be done, we did it, but it would have been easier with more bodies.
Plus when you arent working on a perfectly level surface to begin with, expect that there will be challenges.
Build The Base Of The Gazebo
Whether you have DIY gazebo plans or are assembling a pre-made kit, study the plans before you begin. Although gazebos vary in style, building one follows the same basic steps.
Consult your plans to check the exact steps for building your gazebo.
Prep the area and build base: The gazebo’s base must be level. Whether you are putting it on a concrete slab or on a deck, you’ll need to prepare a level area for the base.
A gazebo has a concrete or wood base. For a concrete slab foundation, pour the slab to the desired size. For added strength, use metal rebar in the concrete flooring. Let the concrete cure before continuing.
For a wood base, assemble the outside boards together to form the base. Level and secure it with screws then lay the decking.
You May Like: When Is The Best Time To Water Your Lawn
Building Permits For Gazebos
Before you build a gazebo, check local laws and zoning regulations to see if you need a building permit. Building codes and regulations vary from one location to the next. If a permit is required, make sure to get it before construction begins. Remember that homeowners associations may also govern the types of structures you can add to your yard.
Even if a building permit isnt required, check local codes to determine how deep footings should be. In some locations, the footings need to go below the frost line to prevent heaving, which is when the freeze-thaw cycle forces them to move.
Diy We Built A Fire Pit Gazebo Swingset:
Do you have a Fire Pit or Swing Set and wish you could combine the two? Well, we’ve designed and built the perfect set of plans to do just that! This incredible project will transform your backyard into a multi-functional hub. The plans detail our exact design of how to layout and build your fire pit gazebo right in your own backyard. You’ll be grilling steaks or marshmallows while listening to the crackle of the fire as you sit in your favorite chair or lounge on a cedar porch swing.
Also Check: How To Build A Freestanding Patio Roof
Diy Backyard Gazebo For $500
This gazebo will cost you just $500 to improve your backyard this summer, and its easy to build with a minimal amount of tools. The best part is you can easily customize the size and style of this DIY gazebo to your liking. It just depends on how much space you have in your backyard! This gazebo also packs a lot of style for just $500, unlike many other square or rectangular-shaped gazebo online that can cost over $10,000.
Our Gazebo Kits Are Diy Build Friendly
A gazebo project is not as difficult as it looks. Think of it as a series of several shorter projects with an end goal in sight for each. You can assemble all the smaller parts in your garage or shop . A project like this would take two experienced carpenters 5-9 working days from to finish. If you have several friends help you with the foundation and framing, you can spread these tasks over a few days.
Read Also: How To Store Patio Furniture For The Winter
Swinging Bench Seat Gazebo
If you’re looking for a cozy space to spend time outside, you could build a gazebo with a hanging bench meant to swing. Kreg Tool can tell you everything you need to know to build this delightful rest spot. The bench and the gazebo structure are made from wooden planks, and the swing is hung with metal chains. Talk about a great addition to a patio or garden space!
Figuring Out The Slab:
Family Handyman
You dont have to get the slab dimensions perfect, but the closer they come to it the easier things will be later. If you hate doing concrete work, skip this section, photocopy it and give it to your concrete mason. A crew can do the work for about $1,200 while youre out shopping for lumber or cutting parts . Closely follow Fig. B if you decide to pour the concrete slab yourself.
Read Also: Can I Put Solar Panels On My Pergola
Shingles Over Plywood Sheathing
Each two-piece section of sheathing is cut from one 4×8 sheet of plywood. Use 8d nails to install the roof panels, allowing 1/8-inch expansion gaps at the joints. Attach metal drip caps at the eaves.
Lay and staple 36-inch wide roofing paper in layers as shown. Begin installation with the starter course made up of a double row of shingles overhanging the sheathing by half an inch. Snap chalklines to ensure that additional courses are installed in straight lines. Weather exposure should be slightly less than one third the total length of the shingle. Stagger the gaps at least 1 1/2 inches and leave 1/8 to 1/4-inch spaces between shingles.
Nail shingles with two roofing nails approximately 3/4 of an inch from each edge and 1 1/2 inches above the butt line of the next course. Nails must penetrate at least half an inch into the sheathing. Use longer nails on the ridge caps to penetrate the sheathing.
Ridge caps are available ready-made for easier installation or you can make them your own. They should be trimmed to four to five inches wide with a 35-degree bevel on one edge. Install with alternate overlaps and with two nails on each side, six to seven inches above the butt edge. Finish at the peak with shingles trimmed to about eight inches from the tail end.
Diy Wooden Gazebo Plan:
With a DIY wooden gazebo, you can create your own private space in your garden. If you have no previous experience of building stuff like this, it may be easier to construct than you might imagine. You could even make a weekend project out of it and have friends or family come and help you put it together. Your project includes drawings, step-by-step instructions, a shopping list, and a cutting list.
Also Check: How To Build Your Own Pergola
Projects Made From These Plans
- A 4 pieces of 6×6 lumber 96 long POSTS
- B 2 pieces of 2×6 lumber 117 long, 2 pieces 120 long TOP PLATES
- C 8 pieces of 2×6 lumber 36 long BRACES
- D 1 piece of 2×6 lumber 169 3/4 long, 2 pieces 84 long BOTTOMRAFTERS
- 4 pieces of 6×6 lumber 8
- 4 pieces of 2×6 lumber 10
- 2 pieces of 2×6 lumber 12
- 2 pieces of 2×6 lumber 8
- 1 piece of 2×6 lumber 16
- 2 1/2 screws, 3 1/2 screws, 1 5/8 screws
- 4 pieces of post anchors
- wood filler , wood glue, stain/paint
How Our New Gazebo Will Save Us Money
This diy patio gazebo kit cost us $1399. That might seem like a lot but well never have to do anything more than give it a little stain every few years.
Had we kept the old gazebo and kept buying new tops over the following few years it would ultimately cost us as much if not more than the new gazebo kit we bought.
This kit is not light. The three boxes weighed 600 lbs. But it has everything in it you need for assembly, other than the tools.
Read Also: Aluminium Louvre Roof System Pergola
Site Selection And Safety Considerations
Site selection is important when building a gazebo. Choose an area that is level or that you can make level. Youll also need to consider potential obstacles and safety concerns.
- Before building any outdoor structure, contact your local utility company to check for underground utility lines. The number 811 is the federally designated “call before you dig” number. It’s there to help homeowners and professionals identify where underground lines are buried to avoid damage.
- Also be aware of overhead lines. Dont build your gazebo directly underneath any overhead utility lines.
- Consider any trees in the area that might need to be trimmed or removed in the future. It may be better to do that work prior to construction.
- If a septic system is present, check the property diagrams for location of the tank and drain field. Do not build over either of these.
- If power will be run to the gazebo, check the path between it and the power source to ensure that a wire can be buried.