Wednesday, March 13, 2024
HomeBuildDo You Need A Permit For A Patio Enclosure

Do You Need A Permit For A Patio Enclosure



So What Are The Relevant Performance Requirements Of The Building Code When You Enclose An Existing Porch Or Deck

When you enclose an existing porch, the main requirements you need to meet are for structure, weather tightness, energy efficiency, internal moisture and durability.

However, other Building Code requirements, such as those for access routes, electricity and safety from falling, may also be relevant depending on the work being done.

If your design plans include electrical work, you should consult your electrician.


Some of the aspects of the work may be restricted building work. If the building work carried out is to the primary structure or weather tightness aspects of the building, and a building consent is required, then it must be designed and carried out by a licensed building practitioner. 

You should get appropriate design advice before starting your project, for example from an architectural designer or a Licensed Building Practitioner who holds a design license, and that you get a practitioner with appropriate building expertise in carrying on the work (note this person may need to be licensed if restricted building work is involved.

The building code can be viewed at the ABCB website.

This article featured on page 43 of Issue 003 of Renovate Magazine. Renovate Magazine is an easy to use resource providing fresh inspiration and motivation at every turn of the page.


Tripod Aluminum Licensed Professional Builders Of Screen Patio Porches And Pool Enclosures

Tripod Aluminum is located in Melbourne and has been serving the surrounding communities such as Port St. Lucie, Viera, Palm Bay, and the beach towns for over 25 years. And if you are still on the fence, check out our article on how screened enclosures can add value to your home or property. We build screened in porches and pool enclosures properly with permits. We use quality materials that will allow your structure to last and bring you enjoyment for years to come, so give us a call today!

Tip #4: If You Need A More Potent Option For Stubborn Stains On Your Aluminum Enclosure

What happens if soap and vinegar don’t get the job done? Some people opt to use bleach.


Several points need to be covered regarding safety and efficacy when talking about using bleach on your screened porch. First, bleach is a very harsh chemical that you should only handle while wearing gloves and protective eyewear.

It’s important that you avoid contact with your skin or eyes when using bleach.

Additionally, you should not use bleach in any areas where kids or pets will be playing immediately after you clean your enclosure.

You also have to be very cautious about discoloration when using bleach on an aluminum surface. There is the small chance that bleach could actually discolor your aluminum. Do a spot test on a small portion of your enclosure before cleaning it with bleach to test the reaction.

Keep in mind that you should only use a diluted bleach mixture consisting of one part bleach to three parts water. Gentle scrubbing with a soft sponge should be enough to remove most stains.


Can I Hire An Unlicensed Person To Build My Screened In Porch Or Pool Enclosure

This is not recommended.  Even if they instruct you to pull a permit, YOU are then responsible as the “contractor.”  In this case, you would have no recourse if they built it incorrectly, skipped out on the job, etc.

Additionally, always check the Better Business Bureau website for complaints against the contractor that you plan to hire.  Nobody is perfect and there are always picky clients, so if a contractor has had complaints filed against them, it doesn’t necessarily mean they are a bad choice.  If they were quick to rectify the situation with the customer, that is a good sign.  However, no matter how quickly they rectified the complaint, if they have MANY complaints against them, don’t risk it!


What If I Skip The Permit For My Screened In Porch Or Pool Enclosure

Do I Need A Permit To Build A Patio Cover

A licensed, professional contractor will not allow you to skip this step.  However, if you have an unlicensed person build your screened-in porch or pool enclosure, they may be willing to cut corners.  This is not worth it!  Please don’t do it, and we’ll tell you why.  If you get caught, it could result in a possible fine or even having to remove your newly built structure!  Additionally, if you try to sell your home, having an un-permitted structure can cause major delays or even cause the sale to fail.

Tip #3: If You Want To Clean Your Aluminum Enclosure The Natural Way

What happens if you still see stubborn mold or algae after using dish soap or power washing? If you’d like to use all-natural products for cleaning your aluminum enclosure, look no further than vinegar.


Using a 50-50 combination of hot water and vinegar, simply repeat the process of washing your enclosure by hand using a soft brush or sponge. You can also choose to just focus on your problem spots with vinegar if the rest of your surface area looks good.

Once you’ve scrubbed thoroughly, simply rinse the enclosure with your hose. The best part about this option is that you are doing intense cleaning without any worry about the mixture that is running down into your grass because vinegar is totally natural and harmless.

Is A Building Permit Required To Enclose An Existing Covered Patio

Yes, a building permit is required for this type of building alteration. A patio slab is not typically constructed with a foundation and will require some additional support to carry the loads of the new walls and windows. Also, many enclosed patios include extensive use of windows and glass doors, therefore code issues involving tempered glass and lateral bracing requirements should be discussed with a Plans Examiner. The use of metal structural components will require engineered drawings, which are signed and sealed by an engineer licensed in the State of Mississippi.


Permit For Screening Your Porch Or Pool Yes You Will Need It

Advertising ContentDo You Need a Permit to Screen Porch or Pool Enclosure?

Melbourne, United States – April 23, 2021 /Tight Line Productions/

Many people do not think of screened-in porches or pool enclosures as construction.  You may ask yourself “do I need a permit to screen porch?”.  Tripod Aluminum, the premier pool and screen enclosure company located in Melbourne, FL, has been in business for over 25 years, and we are here to answer your questions!

Tip #1: If You Want To Clean Your Aluminum Enclosure By Hand

Anyone with a little dish soap, a hose and some free time can wash a glass patio enclosure by hand. Keep in mind that you may need to get up on a ladder for this if you have a “vaulted” enclosure.

First, whip up a mix of dish soap and warm water until you have a sudsy mixture. Next, use a brush with ultra-soft bristles, a sponge or a microfiber cloth to apply warm, soapy water to gently clean the entire surface area of your enclosure. Lastly, just rinse it all down with your hose.

The good news is that you can just walk away to let it air dry after that.

If your enclosure was covered pretty badly in debris or pollen, you may need to actually repeat this process a second time to get a crystal-clear look.

Legal Requirements For Enclosing An Existing Porch Or Deck

The enclosure of an existing house porch or deck, like all new building work, must meet the relevant performance requirements of the Building Code.

    Back to articles

ARTICLE Dennis Monastra

The enclosure of an existing house porch or deck, like all new building work, must meet the relevant performance requirements of the Building Code.

Also, all new building work must receive a building consent before it is carried out. A consent for your design can be obtained from your local council.

The enclosure of an existing porch does not need a building consent if the enclosed porch has a floor area no larger than 5m2. However, even if it doesn’t need a consent, remember that the building work will still need to meet the relevant Building Code performance requirements.

If you do need a building consent, your building work is considered an alteration to an existing building. This means you may need to upgrade the existing house for means of escape from fire, which includes installing smoke detectors. In all other respects, your must be rendered no worse than before you carried out the alteration.

Attached Or Freestanding: Different Requirements For Each

If your patio cover is attached to a house or structure, in most cases, you can often attach posts to existing concrete footings. However, if you plan to install a freestanding pergola, the code requires you to dig concrete footings to ensure stable support. You won’t be able to attach your posts directly to an existing concrete slab.

Final Thoughts On How To Clean Aluminum Patio Enclosures

These tips allow you to clean every component of your screen porch quickly and efficiently without the need to really pay attention to details. The benefit of using gentle options like dish soap or vinegar is that you can let your enclosure air dry naturally before letting everyone get right back inside for leisure without any worries about air quality or safety.

If you feel overwhelmed by the idea of scrubbing or spraying your outdoor living space from top to bottom, you can hire a company to power wash your enclosure for you.

The bottom line is that giving your enclosure just a little bit of TLC will keep it clear, crisp and beautiful without any worries of mold, mildew, algae or pollen.

Do You Need A Permit To Screen Porch Or Pool Enclosure

Sunrooms & Patio Enclosures Tampa Bay Florida

  • April 14, 2021

Many people do not think of screened in porches or pool enclosures as construction.  You may ask yourself “do I need a permit to screen porch?”.  Tripod Aluminum, the premier pool and screen enclosure company located in Melbourne, FL, has been in business for over 25 years, and we are here to answer your questions!

Start With A Little Deep Cleaning On Doors And Windows

Make sure you’re starting with a clean slate before you moisten things up! Start by vacuuming debris from the door and window tracts in your enclosure using a shop vacuum.

You can also use a hose to “blast” any stubborn, caked-on debris away. Additionally, this is a good time to “detail” the doorway and tracks using a wet cloth.

Can You Recommend A Good Screen Enclosure Contractor

I do work with a network of contractors nationally.  By submitting your quote request here, contractors will contact you to earn your business.   This puts YOU in the drivers seat, as opposed to chasing contractors.  I find they’re typically more responsive, professional and have better prices.   Keep in mind they are independent so you still need to do your own due diligence, but contractors that are eager to earn your business and show professionalism early on typically do a better job then the ones with the “I don’t need your business attitude.

What Kind Of Enclosed Patio Doesnt Require A Permit

When building anything varying from a patio to a small cabinet, you require a permit. A permit is always required whenever you want to build something, and the property is not your own; even if it is your own, you would require a permit to show it to the government. 

Every state has its own rules and regulations for permits. A few of the things which require a permit are attached patio covers accessories for sheds/structures of any size if they are attached to your main house, detached patio covers , or accessories for structure/shed within 120 square feet of area. 

Sometimes an analysis of the structure is also necessary to check your patio’s shape if it is different and the tiles. It is suggested that you should consult your local permit office about the measurements you can include in your patio. 

They can tell you how much length and height you can put up for your patio, how much building coverage you can take, property line setbacks, all before you submit your plans or blueprints. 

Those structures which do not require a building permit are detached patio covers, playhouses, tool, and storage sheds, all build less than 120 square feet and more generous or less than 8 feet in height, extending beyond your main house can be built without the need of a permit. However, every state has its guidelines to be followed, so make sure to check it with your local permit office.

When Permits Are Not Required For Home Construction

Even though a permit may not be required, Oregon lawsrequire contractors that are hired to perform varying kinds of work to beproperly licensed to perform the work. Homeowners that are the primaryresidence of the property do not need to be licensed if they choose to performwork.not required for the following

Sunroom Addition Building Permits & Codes Lesson 3

A sunroom requires a building permit. You can provide the homeowner with all the necessary documentation so they can get the permit themselves, or you can act as their agent. You can hire a local drawing service or your manufacturer may also provide this service. In Ontario, unless the drawings are done by the homeowner, the drawing service must have BCIN accreditation.

Whether the homeowner gets the permit or you do, you must do your best to ensure that the installed sunroom and deck comply with local building codes and manufacturers connections and load tables.

Your building permit package will include:

  • Permit application
  • Job-specific drawings
  • Designer Schedule 1
  • Survey
  • Manufacturer’s standard details including fastener information, connection details, and load tables

You should make a checklist of all the items required in a building permit application for your city. In addition, you may be using other products that require additional documentation such as helical piers or SIP floor panels.

 

 

Do You Need A Permit To Build A Sunroom In Florida

Sunrooms are a fantastic alternative to traditional brick and mortar room additions. Sunrooms are becoming more and more popular with many Florida homeowners looking to add additional living space to their Florida home. A very frequent question we see often is “Do you need a permit to build a sunroom in Florida?” It is often a misconception that sunrooms or Florida rooms don’t require a licensed contractor to pull permits. In fact building, any size or style sunroom addition to your home in the state of Florida will definitely require a licensed contractor to pull the proper permitting that is legally required by the state of Florida in order to build your sunroom to meet certain county and Florida state building codes.

Dangers Of Hiring An Unlicensed Sunroom Contractor

Unlicensed Contractors have not passed a state competency test and do not hold a license by the state of Florida, therefore, they lack the education and knowledge of a licensed contractor. When hiring an unlicensed contractor consumers are taking a huge risk to their property and their pocketbook.

Contractors that are unlicensed may claim they can get the job done the cheapest and the fastest. Unfortunately, many people get stooped into thinking they’re getting a great deal when in fact they could end up losing thousands or more. The Department of Business and Professional Regulation states: “If you pay someone to construct a building or a structure, make structural alterations to load bearing walls, or perform services such as plumbing or air conditioning work, that person has to have a state contractors license.”

Do It Yourself Patio Enclosures: A Planning Guide

Do I Need a Permit to Install a Pergola?

Adding a patio enclosure to your home is like adding an extra room. It can be used for a variety of reasons, as well as providing a relaxing space or an additional family room. It can provide protection from the sun during hot summer months as well as protect against harsh winter winds as well. It may also be able to add value to your home. Though it may sound like a difficult job, it can be done with the proper amount of tools and a little sweat equity. Planning is an essential part of every building project.

Set The Budget

Every major project starts with a budget. Deciding how much it will cost to build your patio enclosure is very important. It will help keep you within a predetermined spending limit. The budget will most likely be an estimate and you may spend a little more or a little less than you have planned for. Allow room in your budget for unexpected expenses as the project goes along. Leaving room for error will allow you enough finances to correct small mistakes. If you are unsure of the general cost to build a patio enclosure you can do an online search to get an idea. However, doing it yourself will be much cheaper than hiring a contractor. Your budget will only include supplies and not labor fees.

Apply For Building Permits

Purchase Supplies

 

Do You Need A Permit To Build A Screened In Porch

4.3/5porchneed a permityouporchdoesbuildsyoudoyouneedpermit

If you do have to build something in order to screen in your porch, such as a roof over the porch that ties into your home, you‘ll almost certainly need a permit.

Similarly, can you build a screened in porch on existing deck? You can achieve all of this by building a screened enclosure over your existing deck. Although it’s impossible to design an screen enclosure that fits every deck or need, you can easily modify our structure to fit almost anywhere, thanks to its few components and simple construction techniques.

Just so, what happens if you build a porch without a permit?

Building a deck without a permit can get you into some serious trouble. Some people find out the hard way by having to pay a hefty fine, tearing down their brand new deck or having someone get hurt because of faulty construction. Contractors can lose their licenses if they build without permits.

Do you need a permit to put in a patio?

Check with the local authority as to whether a permit is required to build a patio. A permit isn’t automatically required to build an on-grade patio, whether it’s concrete, brick or any other material. Requirements vary widely in local governments, ranging from relaxed to stringent.

Interior Alterations And Finishing Your Basement

You need a building permit for interior alterations, including partial and full basement finishing projects.

Use the accordions below to find the requirements to apply for this building permit.

Fees
  • permit fee: $0.37 per square foot or $95
  • rebate fee: $250
Process guide
  • location of stairs, furnace, etc.
  • new wall construction
  • location of existing ducting or overhead beams
  • ceiling height
  • pre-engineered floor joist layout drawings
Designer requirements

All submitted drawings must be prepared by either the owner, or prepared and reviewed by a qualified designer, architect, professional engineer or a combination. Some drawings must be designed by a professional engineer when the design falls outside of the prescriptive requirements of the Building Code.

The Building Code requires qualified, registered designers, who review and take responsibility for design activities, to include the following information on documents submitted to a chief building official or registered code agency:

  • name and building code identification number of the registered firm
  • statement that the qualified person has reviewed and taken responsibility for the design activities
  • name, BCIN and signature of the qualified person

Why You Need A Building Permit For Your Sunroom

Usually, any additions or projects that contain a cover or skylights require a permit. A sunroom is similar to an enclosed porch, except, with skylights. Furthermore, it’s essential to make sure your framing is going to hold those skylights in place.

A variety of problems can come from the inadequate framing of sunrooms:

  • The floor falls through.
  • The wall gives way to wind or lighter forces.
  • Your skylights will fall.
  • Additional structures may fall or tilt, causing the room unsafe to occupy.

The problems that stem from insufficient framing can cause significant injuries and death. The building permit is designed to avoid these potential problems.

What Materials Are Used For Building A Sunroom

Engineered to attach seamlessly to your house, our extensions are built out of materials to make you feel at home. Whether you’re after a glass or screened sunroom, you can rely on the high-quality materials we use. These include:

  • •  Insulated ceilings and composite roofing
  • •  Colorbond steel, ply or gyprock for insulated walls
  • •  Powder-coated aluminium window frames
  • •  Fibreglass mesh screens.

To discover how Altec can extend your home with a sunroom, get in touch with our friendly team today on 1800 503 682, or book your free consultation.

 

Will A Screen Enclosure Withstand A Hurricane

In Florida, screen enclosures are built to withstand hurricane force winds, but there are few things to consider…

#1 as the fasteners degrade the enclosure becomes substantially weaker.  In short you should ensure that a high grade fastener is used and that they are replaced as they fall out of manufacturer strength tolerance.

#2 Wind itself may not cause damage, but the airborne trash can could.  

Here Are Some Of Our Valued Customers’ Faqs

Materials and products:

  • What kinds of materials are available for patio covers and which is best to use?Patio covers are available in: wood, vinyl, aluminum or steel. For those who like the traditional look of wood, and have no problem on giving it some attention every several years, the real wood patio cover will be your best option. For the ones who like the white clean look with minimum maintenance, aluminum is preferable. Vinyl is another alternative, but this material tends to be expensive. Steel patio covers are very impressive, usually installed with welding and if painted correctly, they can last many years.
  • What kinds of posts are available?For wood patio covers There are many options. The basic posts are standard 4″x4″ but can also be made out of 2×6, 6×6 and so on. Posts can also be made out of steel, bricks, cement, standard framing and stucco. Aluminum patio posts are usually 3″x3″, sandwiched between a pair of 2×6’s, and can also be upgraded to the impressive roman columns.
  • No. Our aluminum patio products are guaranteed against fading, chipping and pealing. The wood patio covers usually require some maintenance every few years depending on its location, humidity and the amount of direct sun.

City building permits:

  • Yes, usually 2-3 Inspections: Foundation, framing and Final. All city inspections will be accompanied by a Patios4All inspector.

Free quote, what’s included:

Do You Need A Permit For A Patio Enclosure

Excitement is in the air because you’ve decided that you’re ready to add a patio enclosure at your house!

You’re now ready and eager to move on to the planning phase to get this beautiful feature added to your home. In fact, you can practically feel yourself sitting in a cozy lounge chair inside your picture-perfect enclosure to sip coffee on a cool morning.

There’s just one small problem.

You have no idea if you need to get a permit to add a patio enclosure to your home. Do you need a permit for a patio enclosure?

While the step of getting a permit won’t necessarily slow your project down if you do need one, it’s important to get a permit taken care of at the start of your planning to ensure you’re not held up once you’re ready to go.

It’s also important to know about the implications of skipping the step of inquiring about permits for a project at your house.

Take a look at what you need to know about getting a permit for a patio enclosure!

Step Three: Meet With Local Code Official

What is the Cost of a Sunroom?

After you have your plans drawn up, schedule a meeting with your local code official. In this meeting, you can present the rough draft of your ideas. The official will look over them and explain how you can improve your design to obtain approval.

Your local official will explain what parts of your plan will work as well as what needs improvement. Once you’ve perfected your plans, it is time to apply.

Yes A Permit Is Required For Patio Covers

First and foremost, you do need a permit to install a new pergola in your yard. Like all home improvement projects, the permitting process aims make sure that construction is safe and stable. It might be tempting to try to get away with not obtaining the correct permit, but you should never cut corners. Lack of a permit will come back to haunt you in serious ways when you’re ready to sell your house or, worse, if your pergola’s structure fails.

Tip #2: If You Want To Use A Power Washer

If your enclosure is larger, you may want to consider “speeding up” the process with a power washer. This is actually a great option if you’re trying to spruce up a pool enclosure with complex angles. Pool enclosures can often be too grimy for the usual “elbow grease” method of washing by hand with soapy water and a brush.

Power washing works so effectively with aluminum enclosures because you’re removing stains and buildup with hot water that is also pressurized. It can achieve in seconds what might take several passes with a handheld brush.

Of course, caution is needed with a power washer. You can damage your screens if too much pressure is applied. This is why many people prefer to hire professionals to do power washing.

The simplest tip for not harming your screens when using a power washer is to start off on the lowest setting.

Do I Need A Council Permit For A Sunroom

Yes. In most cases, if you plan on building a roofed patio or home extension, you’ll need a permit from your local council. However, the specific permit required varies between states.

Altec can advise you on the permits you need or we can take care of the whole process for you. Whether you live in Brisbane, the Gold Coast, the Sunshine Coast, or northern New South Wales, we can obtain the necessary council approvals for your new sunroom.

 

 

Sunroom Questions: What You Need To Know

Our staff quite often fields lots of Sunroom questions, so we thought we’d share a few of them here in case you’re considering adding one to your home.

How much do sunrooms cost? This is usually the first, and hardest question to answer because it varies from project to project. Just like buying a car, a house, or that next big screen TV, there are many things that contribute to the pricing. In this case, the square footage, where it’s being built, and the type of sunroom all influence the price. For the sake of simplicity, most sunroom ballpark pricing starts at $30k. We have years of experience estimating jobs and working with budgets, so give us a call for a custom quote.

Do you need a building permit? Yes. Adding a sunroom is really no different than any other addition you’d be planning for your home. You’re essentially increasing the footprint of your home with livable space by adding to the existing structure so a permit is required. No need to worry though, we’re well versed in this process and can help homeowners gather and submit all the necessary paperwork to make this a pain-free process.

Do sunrooms have foundations? More often than not sunrooms do require a foundation. A solid foundation ensures that everything built above it is strong, level, and ready to stand the test of time.

Be sure to check out our Sunrooms Page for more information and our photo gallery of images.

Sunroom Construction Planning Lesson 1

Sunrooms and patio covers are subject to the same loads as the buildings they are attached to, like: wind and snow. A building permit is required.

A reputable manufacturer will have engineered their sunroom to meet these loads.They should be able to furnish:

  • Standardized drawings to show how the product is connected to the existing structure
  • Standardized drawings to show how it’s proprietary components are connected to each other
  • Load Tables for proper product selection

Job specific drawings outline the exact size of the sunroom, exactly where the sunroom will be installed on the building, how the deck will be built and other items unique to that particular project. Job specific drawings are drawn by either:

  • The homeowner
  • A 3rd party drawing service that you hire. This could be a local designer of your choosing, or your manufacturer may offer this service.

 

Together, the standard details and job specific drawings will be used for the building permit application. In Ontario, the person providing the drawings must have BCIN accreditation and will provide his Schedule 1 document to include with the permit package.

All sunroom manufacturers provide installation guides for their products. You must provide all the necessary documents in order for your installers to install the sunroom properly.

Manufacturer documents contain proprietary information and must not shared with any other parties other than what is necessary to obtain the building permit.

 

 

Do I Need A Permit To Install A Pergola

Patio covers are a fantastic way to freshen up the look of your backyard. Not only are they an attractive visual centerpiece, they provide much needed shade to make a back patio more livable. However, before you rush to your local lumber store or dig your first footing, you’ll have to get your permits squared away.

Here’s what you should know to make sure your new patio cover meets code requirements.

Do I Need A Permit To Enclose My Porch

4.4/5porchpermitenclosingporch

Building a deck without a permit can get you into some serious trouble. Some people find out the hard way by having to pay a hefty fine, tearing down their brand new deck or having someone get hurt because of faulty construction. Contractors can lose their licenses if they build without permits.

Also, how much is it to enclose a porch? Enclosed Porch Cost FactorsMost porch enclosures require permits, which run $100 to $300 on average. The price to get a building permit depends on the total for the project. The cost to build a patio enclosure ranges from $8,500 to $25,000, or $22 to $75 per square foot.

In respect to this, do I need permit for sunroom?

We just had a sunroom built. Yes, you’ll need a permit. Each municipality has different rules; it depends on the zoning & building code bylaws within your area. If you application doesn’t comply with the city zoning bylaws, you can apply for a variance to amend the bylaws.

Do you need a permit for a screen enclosure?

Generally, you can expect you a screen enclosure project with a permit to be completed between 3-9 months from date of signed contract. During building booms, or during hurricances, the process can take longer.



RELATED ARTICLES

Most Popular