Wednesday, October 20, 2021
HomeProtectHow To Remove Stains From Cement Patio

How To Remove Stains From Cement Patio



How To Remove Deep And Old Grease Or Oil Stains On Concrete By Utilizing Cleaning Agents

The sooner you treat a grease stain on concrete, the easier it may be to remove. But nothing is impossible, and there are also methods to get rid of grease stains that have been on a surface for a long period of time.

We will give you an overview of the best products that can be used to remove deep and old grease or oil stains from the concrete surface, as well as how to use them:

For The Most Stubborn Concrete Stains Coit Concrete Cleaning Can Help

In some cases, over-the-counter cement cleaners can make a difference in removing stains from concrete, but this is definitely not a guarantee. The main reason concrete stains are so stubborn is due to how it can be difficult to bring set-in stains to the surface. Our Concrete Floor Care aggressively attacks tough stains by removing stains that are trapped deep within concrete floors. If normal cleaning and maintenance is not effective, we can help you handle the tougher stains.

Remember, whenever you find yourself feeling frustrated with a concrete stain, give your local COIT franchise a call for a free estimate! 1-800-367-2648

How To Clean A Concrete Pathway Without Harming The Surrounding Grass

Related Articles

After a few years, homeowners might notice that their concrete walks, driveway and patio look a bit tired. Nature’s detritus – dirt, decaying leaves, growing moss, decomposing fruit and berry-stained bird droppings – adds up until the average homeowner goes looking for a walkway and patio cleaner that doesn’t kill the grass. Cleaning concrete and patio pavers without damaging adjacent plants begins with preparing your surface and an environmentally friendly approach before you have to apply elbow grease and chemicals.

How To Remove Stains From A Driveway Patio Or Concrete Surface

Does your patio, driveway, garage floor, or other concrete or asphalt area have unsightly stains? Whether they’re from oil, dirt, rust, dog urine, or anything else, we have the easy solution to get rid of them for good. 

If you have stains on paving stones or a concrete patio, sometimes the solution is simple. Try pouring hot water from several feet above the stone onto the stain. Repeat several times, and your stain may just disappear. If this doesn’t work, try rubbing some dishwashing liquid into the spot with a toothbrush, then rinsing off. For really tough stains, first douse with vinegar or ammonia and let sit for several hours before rinsing off. But for even tougher stains, we have the hacks you need to remove them. 

How To Get Rid Of Fresh Grease Or Oil Stains From Concrete

How to remove rust stains from a concrete patio [ Detailed ...

If you plan to stain, seal, or refinish your concrete, you need to remove oil stains if you witness any on the surface. A failure to remove the oil properly will result in your cosmetic treatment getting ruined since the oil will leak back through. Thus, remove the oil stains from your concrete to avoid this problem in the future.

No worries if you don’t know how to remove grease or oil stains from your concrete surfaces, we will guide you on how it can be done and which product would work well in such a scenario:

When you notice an oil stain on your concrete surface, the first thing you need to do is gather some towels or any oil-absorbent granular material. To quickly neutralize fresh oil stains, the granular that we recommend you to use is or . 

Make sure to have all of these supplies collected before you start the procedure. If the stain is still new, use rags or paper towels to absorb the excess oil from the surface, making it dry and ready to get treated. But be careful that you’re not supposed to scrape the stain in. 

Then you will need to spray an oil cleaner or any other cleaning agent, such as laundry detergent or liquid dish soap, to wash away fresh stains. We would suggest by Oil Eater or as an oil cleaner.

Chomp Pull It Out:

If the oil stain is relatively dry when discovered, let the granular material rest over the stain for approximately six hours instead of 20 to 30 minutes. After that, there is a good chance the stain will vanish or at least fade away. 

How To Remove Grease Stains From Concrete With No Hassle

    Concrete is the most common material used for sidewalks, driveways, and patios. As we all park our vehicles in-house, oil or grease stains will inevitably appear on our concrete. 

    However, it depends on the condition of your vehicle or how much time it has been there on standby. Yet apart from cars, there are countless reasons oil or grease could stain your paver. For instance when during the construction process, oil or grease from several tools or pieces of equipment may readily spill onto them. 

    Effectively removing and cleaning grease stains from concrete surfaces is essential, whether they’re on the patio of an outdoor kitchen or barbecue grill, on a driveway, or a sidewalk. As a result, these hard surfaces will be easier to keep clean and functional as long as possible.

    Some oil stains are minor spills or patches, while others are more highly damaged concrete surfaces. The size and age of the oil stain will indicate how tough it will be to remove. However, using the correct chemicals, you can easily remove grease stains on your concrete surfaces, whether they’re minor or severe, topical or entrenched.

    Natural Concrete Cleaning Solution For Pressure Washers

    Power washers are by far the most accessible tool to use when trying to clean the exterior of your home, especially when it comes to concrete. If made right, a homemade concrete cleaning solution for pressure washer can kill off mold, too.

    To start making your solution, pour one gallon of water into a bucket. Try to get the water to a hot temperature. Then, add baking soda little by little and stir while adding the baking soda until it has dissolved into the water. Add in one quart of household bleach and dish detergent, then mix slowly to avoid the suds from overpowering the bucket.

    Once this natural cleaner is mixed together, pour it into the pressure washer and follow the directions for the tool as stated on the packaging for the best DIY cleaning result.

    How To Get Grill Grease Off Concrete: 5 Simple Methods

    • Darren Wayland

    If you have a concrete patio, you’ll want to take special care when using the space as an outdoor kitchen. While concrete is able to withstand severe weather conditions, it can be extremely difficult to get out any grease stains that have been allowed to set in. Here’s how to get grill grease off concrete without damaging the surface.

    2.5Method #5: Acetone

    Does Your Concrete Need More Than Just A Good Cleaning

    A good cleaning can go a long way in improving the appearance of your concrete surface, but it can only do so much. If your concrete is in need of repair, consider calling the experts at Wolf Paving. You can get a free estimate today, or contact us for more information! Call us at 262-965-2121 for the Milwaukee area, or 608-249-7931 for the Madison area.

    Interested in learning more about concrete? Try these other resources:

    How To Clean Concrete Patio Without Pressure Washer

    A pressure washer is a powerful tool that you can use to remove any debris and dirt from the surface of concrete. It will definitely work like a charm.

    Unfortunately, not all people have a pressure washer because it is not something that you usually use daily. Besides, this tool is extremely pricey.

    Therefore, they tend to look for some alternatives on how to clean concrete patio without pressure washer.

    You can find many homemade concrete cleaner recipes that you can try. They are eminently simple and are even available in your kitchen cabinets.

    How To Remove Stains From Concrete & Other Surfaces

    The bad news is that concrete is porous and cleaning concrete stains can be tough. Concrete has many pockets that capture dirt and mold, creating stains. Unsightly grease, oil and rust are some of the toughest stains to remove from concrete floors and how you choose to clean the concrete stains depends on the degree of the stains and type of flooring.Whether you’re cleaning concrete or cement floors, or trying to improve your driveway stains, there are cleaning solutions that can help. The good news is that it’s straightforward to remove stubborn concrete and cement stains from your patio, driveway, garage or other concrete surfaces. We cover the tools and how to clean and remove tough stains from concrete floors with the cleaning directions below.

    Cement Concrete Steps To Clean

    Everyone cleans differently and routine concrete cleaning can ensure your concrete and cement floors remain stain free. Although water can clean concrete surfaces, we recommend using some a quality cleaning product to help maintain cement and keep concrete surfaces clean.

    Scrub down particularly persistent and tough concrete stains with a bit of undiluted Pine-Sol®

    Hose down the clean concrete or cement with a bucket of clean water or a pressure washer and let dry.

    Cement ConcreteTools For Cleaning

    If you’ve got colored concrete or a light colored cement surface — test a small spot before you clean.

    How To Clean A Concrete Patio Using A Power Washer

    In case you’re not familiar with them, a pressure washer is a machine that releases a high-pressure stream of water, while a power washer does the same thing but specifically using hot water. These machines are invaluable for cleaning large surfaces, such as a concrete patio or the facade of a building.

    The good news is that it’s possible to rent a pressure washer if you think you’ll only use it once or twice each year. To make your cleaning solution, pour one gallon of hot water into a bucket and stir in baking soda a little bit at a time, making sure that it dissolves properly.

    Add some dish soap and one quart of bleach, stirring slowly so that the mixture does not overflow. Pour your homemade cleaner into the power washer and follow the instructions on the package.

    Ways To Clean A Concrete Patio Using Oxygen Bleach

    Cleaning Your Concrete Patio

    If you’re looking for a relatively safe and environmentally-friendly chemical for cleaning your concrete patio, try oxygen bleach, such as OxiClean. One option is to sprinkle this versatile powder over the patio. Scrub at stains using a push broom, then let the bleach sit there for about 15 minutes before rinsing it off.

    Alternatively, combine two scoops of the bleach with two tablespoons of water to make a thick paste with the consistency of peanut butter. Leave the paste sitting on stubborn stains for one hour before scrubbing it away with a brush.

    Another option is to dilute oxygen bleach following the instructions on the package, and then to spray the mixture over your patio, remembering to rinse it away after a few minutes. Any of these oxygen bleach uses help you return your patio to a clean state.

    Will Paint Thinner Remove Oil Stains From Concrete

    Paint thinner is normally put together with oil-based paint to make it light and getable to apply. Minera spirits, white spirits, turpentine, toluene, or xylene are the paint thinners normally used.

    Besides diluting paint, it can also be used for removing the stain, ink, glue, grease, or wax from concrete, cement, brick, or stone. So, don’t worry if you accidentally spilled some paint on your driveway or patio, some paint thinner will save the place.

    How to Apply Paint Thinner for Wood Stain Removal:

    It’s a very easy process to go for. Pour some paint thinner on the paint stain and sprinkle some absorbent like baby powder. Let them stay like that for at least a day and clean the surface. Hopefully, you will find no stain onwards. Repeat the process again if needed until the stain has vanished.

    For oil-based paints, paint thinner is alright but what to do if it’s latex paint? Well, you have to use normal soap and hot water for this kind of paint instead of paint thinner. You cannot use the thinner here. Working with this material is risky as it’s highly flammable and hazardous. Working in an open place carefully is needed.

    How To Remove Leaf Stains From A Concrete Walkway

    Bio

    Q: I found your Dec. 3 advice about removing rust stains from concrete pavers to be quite interesting. I have a problem with stains on concrete, though not from rust. We recently put down a concrete walkway in front of our house. As the leaves fell, especially in the rain, they got stuck to the pavement and left unsightly brown stains. We have tried hosing, bleaching and scrubbing, but we can’t remove the stains. Do you have any suggestions?

    Rockville

    A: The leaf stains are caused by tannins, the same type of compounds that are found in grapes and make wine taste “dry.” Tannin stains on outdoor concrete often go away on their own, thanks to the powerful bleaching action of the sun. But if you don’t want to wait, try using OxiClean — the basic product, labeled Versatile Stain Remover. It’s carried by most hardware stores; at Lowe’s, an 80-ounce tub costs $10.98.

    The active ingredient in OxiClean is sodium percarbonate, a powder that, when mixed with water, releases hydrogen peroxide and soda ash. They are the actual cleaners, assisted by the bubbling action of the hydrogen peroxide.

    Although pictures on some OxiClean packages show what appear to be bare hands at work, wear rubber gloves and take care so you don’t get any powder or cleaning solution in your eyes.

    I inherited a marble tabletop with rust-colored stains. How do I remove them?

    Arlington

    If your efforts don’t succeed, you may want to call a pro who installs and repairs marble countertops.

    What To Do If The Stain Is On Pavers Or Driveway

    Using chemicals on your driveway and pavers can be harmful to the grass and plants around the area. So, is there any solution? Of course, there is. Before the stain treating process, soak the plants and the lawn with water for about half an hour. Once they are filled with water, there will be no space for the chemicals to go in.

    Anyway, don’t take any risk as some plants may be very sensitive. Try to wash the whole place after the treatment also.

    For Cleaning Oil From Plain Trowelled Concrete:

    Here are some tips we’ve picked up from elsewhere for cleaning concrete. These methods should not be used on coloured, or imprinted concrete, or on concrete pavers, or tarmacadam.

    • Mix 1 measure of trisodium phosphate with 6 measures of water. Daub this over the stain with a clean, old paintbrush and allow the goo to dry completely before scraping off the dried paste, which should, hopefully, bring most of the oil with it. Rinse the concrete surface and scrub vigorously with a stiff brush and clean water.
    • Prepare a solution of 5% sodium hydroxide . Daub it over the oil stain using an old paintbrush and allow it to dry for at least 24 hours. Rinse and scrub with clean water, then repeat as required.
    • Paint white spirit or turps over the stain. Let the solvent evaporate for at least one hour before rinsing with hot, soapy water. Repeat as required.

    Cleaning Concrete: What Products Should You Use

    Todd Morris

    Wouldn’t it be nice if your concrete driveway could always look as good as it did when it was installed? As careful as you are, stains and spills are bound to happen and ruin the appearance of your concrete surface. Luckily, there are many ways to remove stains and keep your concrete looking good. In fact, many concrete cleaning projects are things most property owners already have on hand.

    Below you’ll find a list of products commonly used to clean up fresh spills and set stains, along with instructions on what you should do prior to the cleaning.

    Use Trisodium Phosphate To Clean Concrete Patio

    If you are looking for a heavy-duty cleaner for your concrete patio, you should take TSP into your consideration.

    TSP, also known as trisodium phosphate, is renowned for being a strong cleaner. It is odorless and colorless. Besides, it does not contain any bleach nor ammonia.

    How to clean concrete patio without pressure washer, but using TSP, instead?

    Trisodium phosphate comes in the form of dry powder. Therefore, you have to mix ½ cup of TSP with 2 gallons of hot water in a few minutes until you get a mostly clear solution. It will be slightly cloudy, though.

    Once you get the cleaning solution, soak a sponge in it and squeeze the excess water from it. Make sure it is rather damp and begin to clean the stain from the bottom upward.

    You need to move it in broad strokes for a better result. Repeat the steps several times. If the stains do not come off, you can try applying TSP with a nylon-bristled scrub brush.

    To avoid any white spots on the surface of your concrete patio, try rinsing the cleaned area using warm water. Use a new sponge and a new bucket to do it.

    Those were the steps on how to clean concrete patio without pressure washer.

    How To Clean A Cement Patio Using Muriatic Acid

    If none of the other cleaning solutions have been successful, consider using muriatic acid powder. However, it’s important to note that contact with this strong chemical can cause skin burns or damage to your eyes, lungs, and nose lining.

    If you do use muriatic acid to remove mineral deposits or mold from your concrete patio, make sure to wear protective gear, including goggles and a face mask. Muriatic acid is readily available at many home improvement and big-box stores.

    To prepare your cleaning solution, carefully pour one part muriatic acid into four parts hot water and stir to combine. Pour the acid over your patio and let it sit there for about ten minutes, making sure to rinse away the acid before it dries. Finish by sprinkling baking soda to neutralize any remaining acid.

    How To Clean Concrete Without A Pressure Washer

    How to Remove Rust Stains from Concrete

    I’ve heard pressure washers are a great way to clean concrete but I don’t have one and didn’t want to go buy one just for this. I did figure out how to clean concrete without a pressure washer though!

    I recommend following the process above of scrubbing the concrete with a cleaner, then rinsing. To create a more pressurized rinse using a hose, you can either use the jet setting on your hose’s nozzle . If you don’t have a nozzle, just use your thumb to direct the spray forcefully. 

    Remove Mold From A Concrete Patio Using Bleach

    If you’re wondering how to remove that icky mold from your concrete patio, bleach diluted in hot water is the way to go. Cleaning concrete is easy using this powerful household disinfectant.

    Be sure to wear rubber gloves when combining one cup of bleach with one gallon of water. Rub away the mold and mildew using a soft scrub brush, and rinse away the cleaning solution with your garden hose.

    As an alternative, combine bleach and water in the same proportion but add 1/8 cup of dish soap. Using a spray bottle, squirt the mixture onto your patio. Let it sit there for a few minutes, and then use a stiff brush to work the cleaner into the concrete.

    Use Carbonated Drinks To Clean Concrete Patio

    Did you know that carbonated drinks could be superb on how to clean concrete patio without pressure washer?

    Although doctors say that soda is bad for your health, apparently it can be an excellent cleaner for your concrete patio. It happens because those beverages contain acidity.

    So, how to clean concrete patio without pressure washer, but you use soda, instead? It is easy.

    All you need to do is just grabbing your favorite soda, preferably the one containing citric acid. Spill that beverage over the stain, and then leave it for half an hour. After that, scrub and wash it.

    Now, you know some effective ways on how to clean concrete patio without pressure washer. They are environmentally friendly and – more importantly – relatively cheap.

    Backyard Paver Patio With Garden Accessories

    Garden Backyard Paver Patio with Chairs Umbrella Plants Pots Trees and Decoration

    Photo by: Jit Lim

    Jit Lim

    Patios take a beating over the years. You keep the floors of you house clean, so keep your patio clean as well. Spring is a good time to clean so you’re ready for peak patio season. Here’s how to clean a cement patio. 

    Move plants, furniture and other accessories off the patio. Sweep the surface to remove dirt and debris. Remove the weeds that may have grown along the edges or between the cracks in the pavers.

    For a lightly soiled patio, you can remove dirt with a cleaner and a stiff brush. You can use bleach mixed with water. Add 1/8 cup of liquid dishwashing detergent to the solution and put into a spray bottle. Spray the solution onto the surface, let sit for a few minutes and then scrub with a stiff nylon-bristled brush. Don’t use a metallic brush because it can leave metal bits on the concrete that rust and stain the patio. If you have flowerbeds surrounding your patio, protect them as well. Bleach will harm the plants. Rinse the bleach off with the hose. Oxygen bleach is a safer option. Dilute with water and spray on the patio, then rinse off. For tough stains, mix oxygen bleach with water to make a paste the consistency of peanut butter. Apply to stained areas and let sit for an hour. Scrub with a nylon-bristle brush.

    You can also make natural, eco-friendly cleaners from ingredients in your kitchen. 

    How To Clean Concrete Patio With Baking Soda

    Like vinegar, baking soda is an environmentally friendly cleaner for your patio. It could be an exceptional option for anyone who wants to evade commercial cleaners.

    Now, the question is about how to clean concrete patio without pressure washer, but you will use baking soda instead.

    First, mix 90 grams of baking soda with 4 liters of water. Put the blend into a small sprayer. Then, you can begin to spray the stains.

    Should you need something stronger, you can try adding a few squirts of liquid dish detergent. Spray the mixture on the stains and let it sit for 20 minutes so that it can break down the grime and dirt.

    After 20 minutes, you can begin to scrub the patio thoroughly. You will soon notice that the grime begins to vanish.

    After that, grab your garden hose to rinse off the area. Let the concrete dry before you put the furniture back in its place.

    How To Clean Concrete Patio Try These 5 Ways

    Nadya Jones

    To clean concrete patios, you can wash with vinegar and baking soda mix or specialty concrete cleaner. To get out rust stains, you’ll need oxalic acid and a pressure washer. Mildew stains come out with bleach and pressurized water. Lastly, you can remove grease stains with cornstarch and degreaser.

    Are you looking for how to clean concrete patio? With just a few easy steps, you can transform a dirty space into the shining focal point of your outdoor living space. 

    I know how important it is to keep your outdoor spaces spic and span. More than looking good, a clean concrete patio can give you peace of mind and prevent you from slipping. Therefore, I’ve put together this foolproof guide that you can follow. 

    Contents

    Easy Recipes For A Homemade Concrete Cleaner

    Before cleaning your concrete or even staining your deck, you need to get rid of dirt and leaves that may be on the surface. Sweep or use a blower to get rid of loose debris first. If you will be sealing your concrete after cleaning or need to clean a deck before staining, look over our recipes for stain removal to bring back the original color of the material.

    Removing Stains From Leaves & Potted Plants

    Scrub a mixture of dish soap and water onto the stain and rinse it off using the high-pressure setting on a garden hose with a nozzle. You can also use hydrogen peroxide-based cleaners instead of dish soap. Let it sit on the wet stain for about 10 minutes or so, then scrub in a circular motion until the stain is removed.

    How To Remove Stains From Patios And Decks

    How to Stain Concrete

      We love our patios and decks in summer. And why not? Great weather, friends, family, and food make for great memories. But, sometimes, our wood decks or brick or stone patios can take a beating with stains from food, trees, dirt, and grime. Then, it’s time to break out the power washer and elbow grease to get it back into shape.?

      In this tutorial, we review some common stains you may encounter on your deck or patio and how you can remove them.

      How To Clean Concrete Driveway With Bleach

      Commercial cleaners are effective in getting rid of stains and dirt on your patio. However, they can cause other serious issues related to your health.

      Fortunately, there are some alternatives related to household cleaners that are safer for you and the environment. One of them is bleach.

      Cleaning concrete with bleach is not a new thing. It is even famous for being an environmentally friendly multipurpose cleaner. So, how to clean concrete patio without pressure washer?

      Since your concrete patio sits in your backyard all the time, it is prone to dampness. Thus, you may find mildew stains in some areas. If you are facing this issue, go grab bleach to remove them.

      You can use oxygen-based bleach to remove the mildew stains. However, this type of bleach will not be able to kill the spores. If you want to eradicate both the spores and stains, you should use chlorine bleach.

      Here is how to clean concrete patio without pressure washer.

      Tools:

      • Garden hose

      Step 1:

      After wearing the eye protective gear, make the cleaning solution by mixing one part chlorine bleach and two parts water. Do not forget to cover the lawn and nearby shrubs because it may be harmful to them.

      Step 2:

      Place the solution in a spray bottle and apply it onto the mildew-stained areas. Leave it that way for approximately 30 minutes.

      Step 3:

      Answers From Mybuilder Landscape Gardeners

      Best Answer

      100712

      Brick acid will remove the mortar stains from sandstone without damaging sandstone paving, I recommend Bostik, you can buy this from screwfix and most building merchants.I would recommend contacting a patio and driveway cleaning company since a pressure cleaner may also be required.

      All the best Sam

      100735

      Well first of all the days of using sand and cement to point as far gone by in my opinion decent pavers will use new products like easyjoint which you just sweep in and it works perfect to answer your question removing cement from sandstone slabs I personally recommend soapy water and bleach it works every time for us

      104822

      Any acid-based cleaner is not a good idea for natural stone and should only be used as a last resort. Firstly try getting rid of the cement/stain with a pressure washer . If it is only a small area use 60grid sandpaper and carefully sand it out. The last resort: Diluted brick acid my stain the stone, and may cause rust stains as natural stone have traces of metals in it. It can also eat away the natural stone. In short, I will never put any acid-based product on a natural stone surface.

      How Can I Remove Rust Stains From Concrete

      It wasn’t particularly easy but it wasn’t difficult either – it just took a little elbow grease.

      I did this while 5 months pregnant on a hot sunny day – so you can definitely do it too!

      The biggest determinate of how hard it is to get rust off of your concrete is going to depend on how long the stain has been there.

      So, as soon as you notice a stain appear, try to treat it! The longer it sits, the harder it is to remove.

      What we are going to do is scrub the rust off as much as possible, and then use lemon juice or vinegar – which are both acidic – to help remove any remaining stains from your concrete floor.

      You can use a pressure washer, too. But I didn’t need one for this tutorial!

      This would also work to remove rust from driveway. Anywhere you have a rust stain on concrete, here’s how to remove it!

      How To Clean A Cement Patio Using Vinegar

      To tackle more stubborn stains, including rust stains and for removing paint from concrete, combine equal parts white vinegar and water. Let the mixture sit for ten minutes on the stains, and then clean the stained areas with a soft bristle brush. If, after rinsing, the stains have not disappeared, try scrubbing your patio with undiluted vinegar.

      While you’ve already got the supplies out, did you know that you can also clean patio furniture with vinegar? For example, plastic furniture benefits from a combination of white vinegar and water.

      Use Hydrogen Peroxide For Cleaning Cement

      Hydrogen peroxide is available at some pharmacies, big-box stores, and home improvement stores. It’s a relatively mild disinfectant and cleaner, although it can still cause skin irritation, so be sure to wear gloves.

      If possible, replace the screw cap on your bottle of hydrogen peroxide with a spray nozzle so that it’s easy to spray the chemical across your patio, focusing mainly on dirtier sections.

      If you like, spray vinegar on top of the hydrogen peroxide to clean even more effectively. In any case, scrub with a nonmetallic brush to get rid of those tough stains that just don’t want to go away.

      How To Remove Grease Stains From Concrete

      Concrete is one of the most stable and preferred forms of flooring in most outdoor locations. Whether it is your driveway, patio or garage space, concrete is an ideal choice due to its unbeatable strength, rigidity and longevity. In addition, sweeping off the dust from concrete is relatively easy. Still, the cleaning process gets a bit complicated in case of an oil leak on the driveway or when you accidentally end up dropping some grease on the patio grill. Just using soap and water won’t be enough to get the concrete back to its original glory. If you wonder how to clean grease stains easily, here are some simple remedies that can help you out.


      RELATED ARTICLES

      Most Popular