Tuesday, March 19, 2024
HomeFurnitureHow To Replace Webbing On Patio Chairs

How To Replace Webbing On Patio Chairs



What Is A Double Wrap Vinyl Strap

The double wrap is the process of wrapping a vinyl strap over the top of the frame and around it once to hide the rivet of the frame. Its a bit tricky to get used to but once you get the flow of it youll be fixing all your broken outdoor furniture with ease.

Tools & materials you will need: tape measure, vinyl to cut, or pre-cut replacement strapsrivetsfor a double-wrap chaise, a pot with a lid full of boiling water, tongs & heat-proof gloves or similar, a block of wood, a drill, cutters or tin snips.

Time it will take: This is no more than a 10 minute job if you get that water boiling and ready to cook those straps right from the start.


Step 1: Remove the old strap

Pull off the old, broken strap until you have the frame with the empty holes underneath. If your lounger frame is a little dirty, nows your chance to give it a quick clean.

Step 2: Measure strap size

Hold your tape measure around the edge of one hole. Wrap your tape twice around the frame until it meets the edge of the second hole. Image. Then loop the tape measure around the other side of the lounger and wrap in a similar way. Pull it tight and measure the length.

Now deduct 10%. We do this because the vinyl is stretchy and you want your straps to be tight around the chair. If we didnt deduct 10% and installed it, it would be sloppy and loose when you sat on it.

In Jeffs example the tape was 33 inches. Minus 10% will mean 33-3 =30.

Step 3: Make the straps

Step 4: Install the straps

Step 3: The Secret Tool


Note how 10 minutes at 270 F causes the plastic to lose its nice loopy integrity… sticking to your cookie sheet and eventually coalescing into a useless, hot puddle. When that happens, it means the oven is TOO HOT and/or you left it in the oven TOO LONG.

I found 5 minutes at 240 F was hot enough so the straps could be stretched.

Beware that the plastic is quite soft and can easily be nicked by rough handling with the pliers, screwdriver, or abrasion on the metal chair frame.

Remove Existing Screws And Webbing


To swap out the old webbing, you need to remove the screws. Go ahead and do this. Since you won’t be using them anymore, you can throw them in the trash can . 

For webbings secured with pop rivets, use the tiniest drill bit to drill and take out the rivets. We will be attaching the new webbings with the screws you bought.

Types Of Patio Chair Repair For Your Outdoor Furniture

At this time of year, most of us are busy preparing for the frenzy of the holidays and doing our best to stay warm and out of the frigid temperatures outside. Patio chair repair is typically not at the top of your list of things to think about! However, this is actually a fantastic time to have your outdoor furniture repaired and refurbished.


So, what can you do in the way or refinishing your patio furniture? Here are some options for sprucing up your set that will make your transition into spring and summer both easy and beautiful.

Choosing The Best Webbing

Outdoor Furniture Restoration and Repair

Knowing the correct size and color before purchasing a webbing makes it easier for you to shop for it without hesitation. There are three common materials used for lawn chair webbings: nylon, vinyl, and polyester. All of them are strong and can be used in any chair, and are also waterproof.

Although these are very retro to look at, they are pretty hard to find. If you want to keep your lawn chair with the webbing design, you can think out of the box and look for cheap yet stylish alternatives. Instead of selling your chair, replace the damaged webbing, and you’ll be good to go.


The right size of webbing also contributes to the level of difficulty your re-webbing session will be. These may also come in rolls, so be sure to buy enough to avoid having excess webbings. If you do get extras, you can use them for future repairs, but they might not be enough.

 

Renew Worn Patio Chairs With Webbing Or Covers

Privacy Policy

Aluminum-frame lawn furniture with plastic webbing remains popular because of its relatively low cost, but the plastic parts often deteriorate in a few years from the effects of sun and moisture.


The furniture usually can be repaired or even improved with do-it-yourself materials sold by many outdoor-furniture dealers, home centers and hardware stores.

Tapelike webbing woven in crisscross fashion and narrow tubular webbing are among the most common lawn-furniture treatments. Either type of webbing can be replaced with similar material, though colors might be hard to match if only part of the webbing is being replaced.

An alternative to rewebbing is to replace the webbing with a one-piece, fabric-type cover. A typical one-piece replacement cover, called Better Bottom, makes it possible to renew a chaise or chair for less than $10 and end with a piece of furniture that is frequently better looking and will last longer than the original.

Better Bottom covers of plastic netting, made by Phifer Wire Products of Tuscaloosa, Ala., have a five-year warranty against disintegration, rotting or cracking. Conventional webbing often breaks or rots after only two or three years.

To install a one-piece cover, remove all old webbing and fasteners. Screws can be reused, but it’s a good idea to buy extra screws with the cover. Additional screws are definitely needed if the chair has tubular webbing, which usually requires only a few fasteners.


Patio Furniture Frame Refinishing

Once you’ve decided to replace the webbing, slings, or cushions on your premium patio furniture, it also makes sense to consider investing in a brand-new finish for the frames. Imagine if you were able to customize and restore to new condition the bench from the Winston Marseille Manor collection, or an aluminum dining table from the Brown Jordan Swim collection that is starting to show signs of age or perhaps no longer matches your outdoor color scheme. Well, you can! There is no need to replace the furniture when the frame can be refinished for a fraction of the cost.

The frame refinishing process begins with a careful inspection of the frame and any needed repairs, like seized bolts or broken welds. Next, the frame is sandblasted so that the new finish can adhere to a clean, blank canvas which results in a final finish that is very smooth. A powder coat finish is applied electrostatically and then cured in a 400°F oven. The powder coating used is on average 3 to 4 times more durable than an equivalent wet coat, and the result is a gorgeous, unbelievably durable finish.

Did you know The Southern Company provides on-site pickup and delivery to the mid-Atlantic region? Find out if your state is in our service area!

Patio Chair Webbing Replacement Easy How To Guide

Patio chair webbing will naturally fade and get damaged over time, with use, exposure to the elements, and exposure to the sun. You could always throw your pieces away and buy new ones, but does that make sense? Replacing the webbing on your existing patio chairs is often much cheaper than purchasing a whole new chair, and it is surprisingly easy. In this article, we have produced a quick guide to patio chair webbing replacement, and we look at several options for patio webbing materials and colors.

Replacing your furniture webbing is an easy, fun task you can accomplish in about an hour per chair. You can make all of your chairs match with a similar fabric, or go wild with multi colors.

Use your imagination and don’t be afraid to be daring!

Contents

  • 4 Conclusion: Lawn Chairs Like New
  • What Materials Should You Prepare

     

    Flathead screwdriver

    Choose a screwdriver that will work well with the screw that you have. Prepare these materials before repairing your lawn chairs to avoid a hassle in looking for them.

     

    Scissors

    Use scissors that are strong enough to cut through the webbing. Make sure that you are snipping on the right part to avoid having the wrong measurement of webbing.

     

    Knife

    You may use this as an alternative to the scissor when you get to a particular piece that’s a bit hard to cut using scissors. Make sure to always practice safety, and always point the knife away from you.

     

    Webbing strips

    Choose the webbing strip that satisfies you, from the color, size, and design. Generally speaking, 33 feet of webbing will be enough for one lawn chair, but this may still vary.

     

    Replacement screws

    These screws will secure your webbing to the chair tube. To determine the number of screws that you need, count how many straps you have, both vertical and horizontal, and multiply those by two.

     

    Clips

    Securing your webbing to avoid them from fraying needs clips. Individual vertical and horizontal webbing strips will be needing two of these clips, so multiply those by two to get the number of replacement clips you will need.

     

    Repairing Lawn Chair Webbing

    Lawn chairs do not give a lot of trouble except for their webbing, which can give away due to persistent and prolonged usage. The durability of the webbing also depends on quality of the material. If the chair has been a victim of prolonged use, it is possible to repair it at home. All you need is a bit of persistence and the interest to repair the webbing.

    Step 1: A broken piece of webbing does not render the chair useless. In such cases, you can purchase a new vinyl or nylon webbing, matching your chair.

    Step 2: The next step involves the removal of the broken strap. Usually, the straps are affixed by a plastic insert or a screw and nut. So you need to take them off for removing the broken strap.

    Step 3: Cut a piece of the new webbing to match the old one you removed. It should be long enough depending on the requisite measurements, so that it has a margin for being folded. Then stretch the webbing across the base of the chair tightly. If you want it to be more secure, add around 3½ inches for folding the end in a triangle.

    Step 4: Follow step 3 by matching the end fold. Most chairs fold end over end or fold in a triangular shape. When they fold in a triangular shape, it involves a ‘V’, by folding the sides in. Look at the pattern of the chair and imitate it. Punch holes in thick areas, followed by the replacement of screws or plastic push pins.

    Like it? Share it!

    Patio Chair Webbing Replacement Screws

    Use these screws to attach the lawn chair replacement webbing to your furniture tube. These screws are a must, and should fit any tubular aluminum patio furniture frame.

    Each package contains 20 screws, and for most chair models, you’ll need one screw per strap end.

    Count the number of straps, vertical and horizontal, and multiply by two to determine the total number of screws you’ll need per chair.

    If you don’t plan on using webbing replacement clips, use a washer to help take the load off of the screws, and to slow down the fraying process.

    • Screws for Lawn Chair Re-Webbing Furniture
    • Works on Tubular or Wood Furniture
    • Rust and Fade resistant

    How Do You Fix Webbing On Patio Chairs

  • Step 1: Remove the old strap. Pull off the old, broken strap until you have the frame with the empty holes underneath.
  • Step 2: Measure strap size. Hold your tape measure around the edge of one hole.
  • Step 3: Make the straps.
  • Step 4: Install the straps.
  • Additionally, how do you measure a vinyl strap? How To Measure Vinyl Straps

  • Step 1: Measure Width. Measure the width of the strap in the middle , not on the ends where it is attached to the frame.
  • Step 2A: Measure Length for Single-Wrap Method. Place the tape measure at one hole and measure over the frame to the hole on the opposite bar following the placement of the strap. (
  • Step 2B:
  • We Have Been The Original Manufacturer Of Many If Not All The Repair And Replacement Slings You See Online For Patio Sets Chair Chaise Lounge Ottoman Love Seat Etc For Any Outdoor Patio Pool Garden Furniture Sets You See On The Market Today Including The Top Selling Companys You See On Your Search Engine All Our Patio Furniture Repair Replacement Slings Are Made Right Here In Our Factory Leaving You With The Top Of The Line Service And Quality As Well As The Fastest Response Time On Your Order To Get Your Patio Sets Back In Brand New Shape With The Newest 2014 Fabric Selection Faster Than Anyone Guaranteed

    How to Save Yourself Money with DIY Patio Chair Repair ...

    Proudly specializing in custom outdoor patio furniture guaranteeing the highest quality products and satisfying customers for over 28 years!

    Helpful Hints for Replacement Slings

    There are no cancellations of orders on custom replacement slings that have already been cut. Please follow the old adage … “Measure Twice — Cut Once”.

    Depending on the original manufacturer of  furniture and the age of the old slings , installing new slings can be a couple hour job or as little as several minutes — to 4 or 5 hour job for 4 chairs.   Very old slings often are ripped, frayed or mildewed and the old plastic splines can be extremely brittle. Step 1:  Measure for the new sling.

    To measure for new slings — we recommend taking the width measurement while the old slings are still on — and by measuring from Outside channel to outside channel of the two rails to the nearest 1/4″.  The length can usually be taken off the old sling.  We rarely use the width measurement by only measuring old slings once they are removed — as we have found that the old slings have typically stretched quite a bit or are torn — and if new slings are this same width as the removed sling — they are too loose.  When you order your slings from Patio Direct, always provide your width first — then the length

    Step 2:  Remove the sling rail end caps .

    Step 3:  Remove the old sling and Spreader Bars.

    Step 4:  Install the new splines into the sling.

    Step 5:  Install the new sling.

    How To Replace Fabric On A Patio Sling Chair

    Sling chairs are a popular choice for outdoor seating. They’re great for dining or lounging and are comfortable, weather resistant and low maintenance. If your sling chairs are looking faded, saggy or ripped, replacing the fabric is an easy DIY project that will give your chairs new life. We’ll show you how to replace that old fabric step-by-step in our how-to video.

    Before you get to work on your chairs, you’ll need to decide on a new sling fabric to use. We stock two different brands of sling fabric here at Sailrite®: Phifertex® and Sunbrella® Sling. Both fabrics have been designed with sling chair applications in mind, are sturdy, and come in a variety of colors and styles. You can read our helpful guide “Selecting Patio Sling Chair Replacement Fabric” for a more in-depth look at the pros and cons of each brand.

    Once you have your fabric picked out, use the Sailrite Fabric Calculator to determine how much yardage you need. The Fabric Calculator is an incredibly useful tool that we offer to our customers to help you estimate how much fabric you need for a project. We also show you a rendering with measurements so you know how to lay out and cut your fabric panels. We have a Fabric Calculator for pillows and cushions, awnings, canopies, shade sails, window treatments, sling chairs and more. At the bottom of any webpage in the blue bar, select “Fabric Calculator” under the “Resources” section.

    Sling Replacement For Your Patio Chairs

    Patio chair slings last about half as long as the paint on the frame, even on the highest quality patio furniture. That’s why patio chair repair for your slings is important when your furniture is beginning to show its age. It might be that it’s lost some of its elasticity, or perhaps it’s become discolored from use and exposure to the weather. When you have a gorgeous piece like a high back dining chair from the Winton Mayfair Sling collection or an ottoman from the Telescope Belle Isle Sling collection, you can protect your investment simply by replacing the sling.

    We approach sling replacement with an inspection of your piece or pieces as above. The old sling is then removed, and a new sling is cut out of the fabric of your choice – we have over 125 different colors and patterns to choose from. We use only the most durable fabrics for sling replacements. Then our skilled craftsmen sew the sling using weather-, chemical-, and age-resistant GORE TENERA thread, making sure that double-hems are used for added ruggedness. Once this process is complete, the slings are carefully fitted on your existing furniture frame under precise tension. Your furniture is then returned to you in like-new – if not better than new – condition.

    Lawn Chair Webbing: Repair Replacement And Myriad Other Tips

    Lawn chairs are used to laze around in garden or on decks. You can just slump into a lawn chair and relax. However, these chairs are not without flaw and need regular maintenance in order to keep a check on the chair’s webbing, which are susceptible to tearing/fraying.

    General Gardening

    Lawn chairs are used to laze around in garden or on decks. You can just slump into a lawn chair and relax. However, these chairs are not without flaw and need regular maintenance in order to keep a check on the chair’s webbing, which are susceptible to tearing/fraying.

    The very thought of lawn chairs makes you visualize a nice, adequately sunny day, and you idling around in your property. These chairs are fantastic patio furniture for relaxing, especially if you want to take a proper nap in your patio. But what will happen if you realize one day that your lawn chair webbing is in a state of disarray? Here are a few tips and tricks to repair it.

    Patio Chair Webbing Replacement Process

    Courtesy of www.brownjordan.com

    We will determine the type and size of the vinyl webbing. Each manufacturer uses slightly different specs. Some brands, such as or Brown Jordan, use a continuous weave of either 5/8” or 1” lacing for the webbing. Brown Jordan also uses 2” straps and other furniture lines may use individual vinyl straps with a width of 2” or 1 ½”.

    The next step involves removing the rivets that hold the existing straps in place and creating the new straps, which must be carefully measured and cut to size. Holes will need to be drilled into the ends of the straps at precise positions. Once the new straps are ready, it’s time to install them to the frame.

    Installing the straps is a tricky process because they must be at a proper level of tension, and that tension must hold up even when the hot sun is beaming down on your furniture – with you in it. The webbing must be attached in a symmetrical, repeating pattern. Some chairs have a simple pattern of single straps, while others have a more complex basket-weave pattern where a minor flaw in the installation process can throw off the entire design.

    Did you know The Southern Company provides on-site pickup and delivery to the mid-Atlantic region? Find out if your state is in our service area!

    How To Replace Webbing On Outdoor Furniture

    Outdoor Space

    Patio chair webbings take a lot of beating from the elements, so it’s pretty normal for them to crack and fade over time. There are two things you could do as a user – buy a new chair with new webbing or spruce up the old chair by replacing the webbing. If you’re here, then you’ve likely chosen the cheaper route. Now that you’re set and ready, the next thing to figure out is – how to replace webbing on outdoor furniture.

    To replace webbing on any furniture piece, you need to remove the old or damaged webbing and replace it with a new one. This usually involves loosening the screws or rivets holding the old webbing, removing the webbing itself, and swapping in the new webbing with new screws or fasteners. It sounds pretty easy.

    Rewebbing a chair is a far better deal as opposed to replacing the whole furniture. Yes, you will save money, but you will also get more use for your furniture. In this article, we will see how to properly replace the webbing on your outdoor furniture. Don’t worry; it’s easier than you think.  

    Table of Contents

    How To Repair The Webbing On Lounge Chairs

    Whether made from vinyl, nylon or other material, the webbing on outdoor chairs eventually breaks down. Exposure to sunlight and weather as well as day-to-day wear frays nylon and stretches vinyl. Since chair framework typically remains solid, repairs involve removing the old webbing and replacing it with fresh material. Purchase replacement supplies from hardware stores or home centers.

    Patio Chair Webbing Replacement By The Experts

    It’s summertime again, and that means family and friends will be spending more time with you outside, where your patio furniture should be the star of the show! But even the highest quality outdoor furniture will eventually begin to show signs of wear. If you own webbed or strapped patio furniture, the good news is that patio chair webbing replacement is an option. Replacing the vinyl straps allows you to keep your favorite patio furniture by refurbishing it with afresh, new look.

    Weave The Webbing From The Back

    Installing Vinyl Webbing In Patio Furniture

    Now we can weave the replacement webbing into place. 

    Lay the newly cut webbing across the seat starting out from the back. Next, fasten it to the frame bottom with the screws. Make sure you fold the ends under before you drive in the screws and washer.

    Do this continuously until you cover the entire length of the chair you measured. Avoid pulling the webbing too tight so it won’t warp the frame. Keep it firm but gentle!

    Where Can I Get A Webbing That Is Durable

    There is more than one place to find webbing that is durable. A good place to start is hardware stores nearby. You can also check at home improvement stores. Webbings are readily available in these places, especially if it’s a big store. 

    If you also know any nursery around or garden center, you might be able to get a good deal there too. 

    For online purchases, I highly recommend Amazon. In fact, I recommend buying your webbing online if you want a better guarantee of quality. You can read reviews left by other customers to determine whether or not the product is durable or not. 

    Evidently, fixing webbing on outdoor chairs is very easy and may even be fun for some people. It is a lot less cheap than buying the whole furniture. 

    So if you have any webbed chair that needs an upgrade, consider replacing the webbing as described above. It might be the simplest and quickest DIY project you’ve ever embarked on. I bet even a beginner can reweb one chair in just an hour. 

    Rewebbing will not only save you money but will also get your chairs looking new again. And in terms of color and design, there’s no limit to how far you can go. You can go “wild” with different color blends, or you can choose something simple that suits your existing decor. 

    It’s all in your imagination!

    Sling Clearance Chair Replacement Sale

     

    >Click Here For Sling Pricing<

    Offering the LOWEST PRICE GUARANTEED on Patio Replacement Slings for your Outdoor Sling Chairs, Ottomans, Patio Sling Love Seat and any other Patio Replacement Sling or Outdoor Replacement Sling you can provide us measurements with to get your Sling Patio Set back in style! Patio Direct offers the HIGHEST QUALITY Outdoor Custom Replacement Slings to repair or replace your outdoor patio furniture slings on your chairs, chaise lounges, ottomans, love seats or ANY other sling you would like to replace —  with all of our slings custom made for you personally, from the highest quality outdoor furniture fabric, also having the largest selection of quality durable sling fabrics as of this year to give you the best selection to bring your outdoor furniture sling seating surface back to new — or even if your old slings are still in “good condition”, you can achieve a BRAND NEW look for your outdoor patio, pool, lawn. patio etc. sling furniture sets. Your replacement sling may also be sometimes called “mesh” or “webbing” or “seating surface” or “cloth”.



    RELATED ARTICLES

    Most Popular