Measure New Straps And Slings Accurately
Replacing straps or slings requires accurate measuring. When attaching new straps, the pieces must be precisely cut and then softened in near-boiling water for 15 minutes so they can be stretched over the frame.
The worst mistake people make is not doing a test strap or two before cutting all the replacement straps. Do one or two test straps and attach them to make sure your measuring is accurate, Mattingly says.
Wicker, engineered for open-air applications, is treated with a plastic resin, protecting it from nearly everything but wear and tear. It will eventually break down and generally cant be repaired.
Melissa Hammer, a senior category manager at CSNStores.com, says resin wicker is much less prone to damage than indoor wicker, but it does get dirty. It can be cleaned with a mixture of mild detergent and water.
Cleaning is important to prolong the life of all types of patio furniture, and not just wicker. Patio pieces should be cleaned once a week, Mattingly says. Furniture would last much longer if people would just clean it more than they do, he says. Just clean it.
Related Links:
Leave It To Brown Jordan Vinyl Repair Experts
First of all, in order for the chair to be completely restored prior to restrapping, the frame will most likely need some rehab work as well. To properly restore it to mint condition, the frame should be sandblasted down to the metal, cleaned, and a powder coat applied in the color of your choice. Finally, the coating must be heat-cured. Not exactly an easy part of the project to do yourself!
After this process, the vinyl straps can be replaced. However, important to the restrapping process is making sure that the straps are applied with the proper tension. This is difficult to accomplish if you do it yourself. Because the vinyl straps will start to stretch and loosen after the chairs have been in the hot sun, it is critical that the straps are relaced to the chair at the proper temperature. Otherwise, after you restrap, chances are that the straps will loosen and sag after a few months of use and need to be repaired again.
Professional restrapping patio furniture services such as The Southern Company prevent this problem by repairing furniture in a hot room where the temperature is set to at least 95°. This allows the professional making the repairs to tighten the straps to the proper tension so that even when you are using them on the hottest days, the straps will not loosen.
To get a better idea about the restrapping patio furniture process, take a look at this video:
How To Get Patio Chairs Restrapped
Q. Can you recommend a local company to replace the strapping on my Brown Jordan patio chairs? The straps on mine have permanently discolored over 15 years outside. Id like to have them redone before spring.
Bethesda
A. Youre smart to plan ahead.
Urban Country, a Brown Jordan dealer in Bethesda, recommends having the chairs restrapped by Criterion Lawn Furniture Repair . The company is based in Keyser, W.Va., but picks up and delivers throughout the Washington area, including in Bethesda. The transportation fee, which covers both round trips, is $150. Restrapping typically costs $85 to $90 per chair. If you also want the chairs refinished, the total price might be $170 to $185 per chair.
Q. How can I clean the slate tiles in my bathroom? They are sealed with some compound and show many splatters of paint as well as scrapes accumulated over the years.
Washington
A. company that specializes in stone care can remove the sealer by applying a floor finish stripper. Potomac Stone Care uses the Hurricane stripper made by Daycon. The stripper will also take off whatever is on top, such as the paint spatters. Stripping may leave the slate slightly chalky, says Steve Kivinski, a stone technician for Potomac Stone Care, but the company then treats the stone to restore the color and bring back the luster. The complete treatment is typically a one-day job. The cost ranges from $450 to $1,500, depending on the size of the room.
Recommended Reading: How Much Paver Base Do I Need
How To Fix Sagging Patio Chairs Made Of Mesh Sling
This group of outdoor chairs comes with mesh fabric that can get pretty slack from use over time. If you have these, you may have to repair them from time to time if you want to get the most out of them.;
To fix the loose seat, here are the steps you need to follow.;
Step 1: Start by measuring the chair for its width, length, and curvature.
Step 2: Get yourself a new sling based on the measurements. You can order these slings online on Amazon or acquire one from a patio fabric shop near you.
Step 3: Once you have your new sling handy, cut it according to the measurements you just took.;
Step 4: Remove the old sling from the chair, ideally by sliding half of the chairs sling from the rail after removing the bolts and freeing the rail. Also, locate the spreader bar and remove it as well.;
If you wish to repaint any part of the chair, consider doing it now before proceeding to the next steps. You may also want to repair the spreader bar at this point if it needs repairing.;
Step 5: Separate the rail from the patio furniture and insert the nylon rod of the sling in the other rail. Ensure the slings hem side faces the rear of the chair.
Step 6: Slide the rail you removed back into its place and connect the rod that you detached from the opposite side of the frame. Next, return the spreader bar into its place, bending it slightly for better fitting if necessary.
Step 7: Finally, cut any excess rod to fit your chair using a wire cutter, and cover the rods with the end caps.;
How Do You Fix Patio Furniture Straps
What is a double wrap vinyl strap?
. Beside this, can you paint vinyl straps on patio furniture?
Vinyl strapping is used as part of some exterior chairs. If you would like to paint vinyl strapping, you must combat a pair of problematic issues. Vinyl is poorly suited for paint adhesion. In addition, because vinyl strapping is flexible, it will cause ordinary paints to crack.
One may also ask, how many feet of webbing do you need for a lawn chair? 39 feet
Secondly, how do you measure a vinyl strap?
How To Measure Vinyl Straps
What can I do with old patio furniture?
Yes! Aluminum patio furniture is easily recyclable, but you can‘t place it in your curbside bin. To recycle your patio furniture, you’ll have to either take it to a local scrap yard or have it hauled away by an eco-friendly junk removal service like LoadUp.
Also Check: How Many Bags Of Concrete For Patio
Diy: How To Replace Vinyl Straps On Your Patio Chairs
October 17, 2017 by Sgentino
1. ;Order New Straps
Measure the frame: For a single-wrap strap , measure across the frame from hole to hole with a cloth tape measure wrapping around the outside of the frame. A double-wrap strap covers the fasteners. Start at one hole, loop the tape measures fully around the frame, then pull to the opposite hole and repeat.
Order parts: Buy enough straps and pegs to redo the entire piece. The supplier will cut each strap to length and punch a hole for pegs or attach edge clips on both ends.
Slice through all the old straps;with a utility knife and pop the pegs or clips out of the frame with a screwdriver. This is the best time to retouch or repaint your frame. Go to Frame Touch-Up Techniquesfor how-to and tips.
2. ;Attach the Strap
Make the straps flexible by soaking them in hot water; never use a hair dryer or heat gun. Attach the strap end by pushing a peg through its hole and into the hole on the back of the frame.
3. Wrap the Strap Around the Frame
With the peg seated firmly, wrap the strap all the way around the frame, covering the peg.
4. Stretch the Strap to the Other Side
Grab the strap near its middle and stretch it to the opposite side of the frame. Hold it tight against this side with one hand; use the other to loosely wrap the strap’s free end around the frame 1½ times.
5. Secure the Strap
A Revived Outdoor Space Awaits You
We are experts at restrapping patio furniture. In the end, if what you want is your vinyl patio chairs looking and feeling brand new this summer, then let The Southern Company do the work for you. Our professional and experienced staff will repair, restrap, and refinish your furniture so that it is looking as good or even better than the day you first brought it home. Relaxing and entertaining in your outdoor space will be exciting and fun again!
Don’t Miss: How To Remove Mold From Pavers
Wrought Iron Patio Furniture Repair
Wrought iron outdoor furniture, such as the stunning vintage Molla collections, can also be restored to new life. The process includes careful sandblasting to remove every last speck of the old paint. Next, a powder primer is electrostatically applied, followed by the final powder coat. The furniture is then cured in a 400°F oven, resulting in a beautiful, durable finish that makes your wrought iron patio furniture look brand new again.
How To Fix A Mesh
Next, we tell you how to fix a mesh-sling patio chair. Although some of their designs may vary slightly, the process for fixing them is almost always the same. Notably, mesh-sling patio chairs consist of just two main components: the frame and the mesh sling. As such, the only reason for it to sag is if the mesh sling is old and has seen its fair share of wear and tear.
You can ditch the old mesh sling, replace it with a new one, and your problem will be as good as solved. For this, start by taking chair measurements before you even set a date for the repair project. This is because you need a new mesh sling, and if you order from Amazon, it should take a few days to arrive at your doorstep.
Measure both the width and the length. For the former, start at the rail center on one end of the chair and stretch the tape measure to the other rail center. Also, note that some options dont feature equal width at the top and the bottom of the chair. Consequently, measuring the width independently for both these sections is highly encouraged.
Lengthwise, start at either the top or bottom of the mesh sling and measure to the opposite end. Be sure to account for the curvature of the chair while doing this; otherwise, youll order a smaller mesh sling than you need. A pro tip is that you should always order slightly larger mesh slings, so you have extra material to work with.
Recommended Reading: How To Get Rid Of Patio Flies
How To Order The Right Size Replacement Slings
Click on the appropriate chair from the replacement sling page and have your measurements to hand.
Now select the correct sizes from our drop-down menus.;
Select the rod size, then choose your desired fabric. We custom make your replacement sling from over 50 different designs: from cane wicker fabric to solid block colors, to fetching stripes and stylish patterns. View the swatches here.
Delivery is free for orders over $150. Slings ship within two weeks and because they are custom-made are non-refundable and non-returnable once the order has been processed so it’s doubly important you get the measurements correct by following the steps above.
How To Replace Single Wrap Vinyl Straps
wikiHow is a wiki, similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 15 people, some anonymous, worked to edit and improve it over time. This article has been viewed 57,480 times.Learn more…
Many types of outdoor furniture use vinyl strapping stretched over a frame to provide comfortable support for the seat and back. These straps become brittle and discolored over time, and may need to be replaced. This is an easy operation and will make your furniture look like new.
Recommended Reading: How To Remove Mold From Concrete Patio
How To Repair The Vinyl Strapping On A Lawn Chair
Lawn furniture is generally left out in the sun and elements for several months of the year. This can cause dry rotting, especially in vinyl furniture. If the vinyl straps break or weaken, save money by replacing the straps rather than replacing the entire lawn chair.
Remove the old strapping with a sharp knife and clean the excess strapping out of the 1-inch grooves on the frame of the chair.
Apply a thin layer of petroleum jelly over the holes where the strapping is intended to fit. Use about a dime-sized bead on the strap slots on the aluminum frame of the chair. The lubrication will make it easier to install the replacement strapping.
When holding the strap, you will notice a little tab cut into each end of the vinyl. Use the screwdriver to push the tab of the strapping into the gap on the chair frame. Wrap the strapping over the chair frame. Apply petroleum jelly to the hole on the other side of the frame, and use the screwdriver to push the second tab into place.
References
The Problem: Damaged Wood
Want to make scratches in your wood furniture less evident? There are kits that come with retouching crayons, which fill in and disguise scratches. Rockler has a Repair, Renovate, Revive kit. You can also use it on your indoor furniture to repair scratches, clean, fill nail holes, and more. You could also purchase a set of furniture markers like the ones at Harriet Carter. Find your perfect match and fill in the scratches. Normally the way the crayons work is by applying them with a putty knife, sanding them down, and then applying a top coat to blend everything together and effectively disguise the scratch or ding. For best results, consult the manufacturer’s directions.
Don’t Miss: Black Spots On Outdoor Cushions
Sling Replacement For Your Patio Chairs
Patio chair slings last about half as long as the paint on the frame, even on the highest quality patio furniture. Thats why patio chair repair for your slings is important when your furniture is beginning to show its age. It might be that its lost some of its elasticity, or perhaps its become discolored from use and exposure to the weather. When you have a gorgeous piece like a high back dining chair from the Winton Mayfair Sling collection or an ottoman from the Telescope Belle Isle Sling collection, you can protect your investment simply by replacing the sling.
We approach sling replacement with an inspection of your piece or pieces as above. The old sling is then removed, and a new sling is cut out of the fabric of your choice we have over 125 different colors and patterns to choose from. We use only the most durable fabrics for sling replacements. Then our skilled craftsmen sew the sling using weather-, chemical-, and age-resistant GORE TENERA thread, making sure that double-hems are used for added ruggedness. Once this process is complete, the slings are carefully fitted on your existing furniture frame under precise tension. Your furniture is then returned to you in like-new if not better than new condition.
The Problem: The Umbrella
Sometimes only a part of your patio umbrella gets damaged or too worn to use anymore. In that case, you can purchase bits and pieces at A Good Strapping. You can get a kit that includes all the pieces except your old cover if you just need the base of the umbrella. That means the overall look to your outdoor furniture set isn’t compromised, but you have a functional, sturdy umbrella to enjoy again. You can also get bottom poles and clips. However, if you need to have your umbrella re-stringed, you’ll have to send it in.
There are also patch kits that allow you to iron on sections of material in order to repair your umbrella. This is a good choice for those with good umbrella frames but a damaged cover. You could also stitch a tear with a simple sewing kit or even glue, depending on the size and severity of the tear.
Also Check: Can You Dye A Faded Patio Umbrella
The Problem: Worn Or Faded Cushions
Unless you’ve got a minor tear, you might be hard-pressed to find a kit designed to fix problem patio cushions. However, you may be able to use that sewing kit to make some new ones or at least stitch the covers back together once you cut new foam for them. If your cushions sag and are uncomfortable but your covers look fine, you could just replace that. If your cushions are still comfortable but the covers have seen way too much UV light and too many rainy days, you can remove the fabric and use your needle and thread to cover them with something new.