Friday, October 4, 2024
HomeFurnitureHow Heavy Should A Patio Umbrella Stand Be

How Heavy Should A Patio Umbrella Stand Be

To Choose The Right Umbrella Stand You Need To Review The Following Information:

Sunnyglade Outdoor Living Heavy Duty Round antiqued Patio Umbrella Base (Bronze) Review
  • What size is your umbrella ?The diameter of your umbrella width is important in determining how much weight will be necessary to hold the umbrella.
  • Is the umbrella positioned through a table, or is it free-standing?A table can add weight to help hold down your umbrella, however a freestanding umbrella requires a considerably heavier base.
  • What size or diameter is the umbrella pole?The most common umbrella pole size is 1.5 in diameter, but can range anywhere from 1-1/8 to 3 depending on the type and size you order. Be careful to order a base that is properly sized for your umbrella pole, as well as check the hole diameter in the patio table to make sure it will fit. As a last check, you should measure the height under any patio table leg supports to ensure that whatever base you purchase will fit beneath them.
Patio Umbrella Base Sizing Chart
Umbrella Canopy Width*

What Features Should I Look For In An Umbrella

From pulley systems to tilting mechanisms, many umbrellas include features designed to expand the functionality of the umbrella while also making it easier and less labor-intensive to operate. Let the size of umbrella youre shopping for and what you are willing to spend guide you in determining what features to look for. Generally, a larger umbrella should have more features, as these umbrellas are heavier and more difficult to maneuver, while a small umbrella may be better suited to a simple, straightforward design.

Lift Mechanisms

One of three mechanisms is used to open an umbrella: a push system, a pulley system, or a crank system. Once opened, umbrellas will either need to be secured in the open position with a pin, or feature an integrated design that keeps the umbrella open automatically.

Push-Up

A push-open system works by simply pushing the umbrella upwards and open from the hub. A push system requires the most physical effort.

Pulley

The pulley system uses a wheel and rope to raise the umbrella canopy more easily than a push mechanism.


Crank

Umbrellas with a crank system require that the crank be turned in one direction to open the umbrella, and the opposite direction to close the umbrella. Crank systems are ideal for larger umbrellas and require minimal physical exertion.

Tilt Mechanisms

Push Method

In a push tilt system, the umbrella is manually maneuvered to a tilted position.

Crank

Collar

Taking Care Of Your Umbrella

Umbrellas represent a sizable investment, and should be well-cared for and maintained to preserve their high quality of craftsmanship and appearance. Be sure to comply with all listed care instructions for your umbrella model, as these instructions will vary. Store your umbrella in a dry, dark place during extended periods of non-use or in the wintertime. Keep your umbrella closed and covered by a durable cover whenever not in use.

  • Company Info

Don’t Miss: How To Paint Wrought Iron Patio Furniture

Why You Should Trust Us

The original author of this guide, Kalee Thompson, lived for more than a decade in Los Angeles, where the near-constant sun fuels an equally constant quest for more and better shade. After moving into her home there in mid-2010, she went through three 9-foot backyard patio umbrellas, each purchased for less than $100. The first was never the same after an epic 2011 windstorm. Carelessly left up, that umbrella was lifted by the wind and converted into a dangerous projectile that stabbed into a neighbors hillside . The second and third umbrellas simply got shredded by some combination of temperamental Santa Ana winds and incessant UV damage, after a little more than two years of year-round use.


Kalee examined the umbrella inventory at local stores, including Costco, Home Depot, IKEA, Orchard Supply Hardware, and Walmart, and systematically examined the much more extensive online offerings from the same, as well as from Amazon, Armstrong Garden Centers, Crate & Barrel, Design Within Reach, Lowes, Overstock, Restoration Hardware, Target, Wayfair, and West Elm. And she looked at the models from upscale umbrella suppliers Tuuci and Santa Barbara Designs the latter company makes gorgeous umbrellasincluding some that look like flamenco skirts or a shade for a popsicle cartthat are so expensive the prices go unlisted in the companys printed catalog.

Can The Patio Umbrellas Pole Fit Into The Base

Patio Umbrella Stand Vintage Finish Outdoor Table Pole 30 ...

Before you choose your patio umbrellas stand, you must know exactly the center poles diameter. The sleeve of an umbrella stand must be slightly bigger than your patio umbrellas pole, yet it should not be too big.

At Least 1/16 to 1/8 inches bigger with a tightening capability, also, preferably with a broad compression area on the end of the tightening knobs.

Recommended Reading: How To Get Rid Of Patio Flies

Look For An Umbrella With Vents

Often the reason an umbrella falls over is that it catches too much wind in the fabric. To eliminate this, you can buy an umbrella that has vents in the material. These vents let the breeze through, but they keep the rain and sunlight out. Of course, if you live in an area with extreme winds, the vents will only help so much. Still, its something to consider the next time youre in the market for a new patio umbrella.


Must The Patio Umbrellas Stand Be Mounted Or Not

Depending on what you use your patio umbrella for, where you locate it, and how large it is, you might prefer to have your umbrella stand mounted. If your umbrella stand is mounted, it will provide a lot of support and stability, regardless of the canopy size.

The umbrella stand can be mounted in one of two ways:

  • In-ground: This is ideal if you have a larger patio umbrella requiring a lot of support and you do not wish to move the mount anywhere. An in-ground mount is permanently fixed, and, thus, they require installation in a concrete footing.
  • Surface mount: This is ideal if you have a huge patio umbrella or if your patio umbrella is subject to a lot of wind resistance. These mounts are only temporary . This is ideal if you wish to have both a great amount of support for your patio umbrella and the option of moving the mount at a later day .

prior to pavers

Also Check: How To Build Patio Steps Using Pavers

How Heavy Should A Base Be For A 9 Foot Umbrella

A good way to determine the minimum weight for your umbrella stand is to multiply the width of your umbrella canopy by 10. For example, for a 7.5umbrella we recommend using a 75 lb. umbrella stand a 9umbrella will require at least an 90 lb.

How much does a cantilever umbrella weigh?


After a great deal of research, we have determined that the best cantilever umbrella base weight is the EasyGoProducts 60 Liter Weighted Cantilever Umbrella Weight Base . This unit can supply up to 211 lbs of weight when filled with sand, or 135 lbs when filled with water.

Why Do Patio Umbrellas Blow Over

How to Assemble Universal Cast Stone Patio Umbrella Base (SKU: SDUS-08RD)

For most people, sitting outside under a patio umbrella when the wind is blowing hard is not what they are after. There are a number of Patio Umbrellas that have been tested in wind tunnels that show they are capable of withstanding 100Km/hr winds, when still up! For most of us, this is of limited benefit, as I have no intention of sitting outside in such conditions.

The main reason people are frustrated with there umbrella blowing over is when it happens due to an unexpected gust of wind, not when it is blowing a regular hurricane.

You May Like: How Many Pavers Do I Need For A 12×12 Patio

How Do I Keep My Umbrella From Flipping

  • Umbrellas.
  • Consider the weight and bulk of the umbrella.
  • Find an umbrella that is easy to open and close.
  • Think about the size of the umbrella hood when opened.
  • Get an umbrella that is weatherproof and windproof, meaning it wont rust and wont turn inside out in high winds.
  • Choose a Teflon-treated hood.
  • Leave Your Patio Umbrella Open When Its Not In Use

    A stylish and colorful patio umbrella can look so nice when its open that you may be tempted to keep it up all the time. Try to resist this habit. Your patio umbrella will stay in better shape for a longer period of time and will be much less likely to crack or fall over if you keep it closed and securely tied when its not in use.


    Also Check: Outdoor Furniture Vintage

    Check The Fit And Adjust If Necessary

    Open and Close the Umbrella, and see how the new umbrella cover replacement looks on your frame. If it is too small, obviously you shouldnt try to open the umbrella all the way, as it will rip. Return it, measure again, and order a different size.

    If it is a bit too big, you can consider picking up some Rubber Leg Tips from your local home improvement store, which will fit over the ends of the umbrella ribs and add a bit of distance to the ribs. These tips will extend the overall length of the umbrella a bit and may make it tauter.

    If the size is way too big, return and get a different umbrella canvas.

    How Do I Keep My Beach Umbrella From Flying Away

    Outdoor 4 Piece Cantilever Offset Patio Umbrella Stand ...

    Heres the best way to properly secure a beach umbrella:


  • Take your umbrella and bury it in the sand by using a rocking back and forth motion.
  • Once its sufficiently buried into the sand, open the umbrella and tilt into the wind so the wind pushes the umbrella into the sand, instead of lifting it out.
  • Also Check: How To Keep Dogs Off Outdoor Furniture

    No More Fighting For A Spot In The Shade

    The 12 x 12 Square Garden Pavilion Umbrella from Treasure Gardens.

    Its quite plausible to replace a gazebo with Treasure Gardens Square Garden Pavilion Umbrella. Youll still be able to enjoy evening dinners under a covered area with a few additional perks. For one, you can take this umbrella with you in the case that you have to move. Luxury drapes provide privacy and give you the VIP Cabana feeling for a fraction of the cost to build a gazebo.

    More Patio Furnishing Buying Guides

    Does My Umbrella Stand Need To Be Mounted

    Depending on the application or the size of your umbrella, a mounted umbrella stand may be a more suitable option. Mounted umbrella stands provide heavy-duty support and stability for your umbrella, no matter the canopy size. Umbrella stands can be mounted two ways: in-ground or surface mount.


    Surface mount stands are ideal for securing large umbrellas, as well as umbrellas in substantial wind or high traffic areas. Surface mount umbrella stands are semi-permanent, making them a great option for heavy-duty support with optional removal. Surface mount stands feature pre-drilled holes that allow for easy setup on wooden decks or concrete slabs. For deck mounts, these stands are bolted through the wood and are typically secured by a base plate underneath the deck surface. In concrete slab applications, the stand is bolted directly into the concrete.

    The in-ground mount umbrella stand offers a permanent solution for securing your umbrella. In-ground stands provide a stable base for any application that may require heavy-duty support. These umbrella stands require a concrete footing installation to anchor the stand in place.

    The supportive sleeves on both surface and in-ground mount umbrella stands can be removed and replaced with a base plate. This provides a safe, flush surface when your umbrella is not in use.

    You May Like: How To Remove Sliding Patio Door Panel

    Repair And Refresh With Replacement Umbrella Canopies

    When your patio umbrella has seen better days, look to AuthenTEAK for the best selection of patio umbrella replacement canopies. Why replace your patio umbrella canopy? Repeated exposure to the elements can take a toll on even the highest quality patio umbrellas. The result is often a faded, damaged patio umbrella canopy that detracts from your outdoor space. Fixing the problem is as simple as measuring and choosing the right replacement canopy.

    We carry a large assortment of Treasure Garden replacement umbrella canopies in premium weather-resistant outdoor fabrics including Sunbrella. Our replacement umbrella canopies are sized by their width. Just measure one rib arm from the center of your umbrella down to the outside edge and multiply by two to obtain the size needed for your replacement umbrella canopy. Give your umbrella a new lease on life shop patio umbrella replacement canopies from AuthenTEAK.

    You May Like: Paver Patio Slope Drainage

    What Accessories Should I Purchase For My Umbrella

    Making A Patio Umbrella Stand

    Accessories can add eye-catching flair to your umbrella and also help to protect your umbrella from damage and everyday wear.

    Umbrella Base

    Most umbrellas should be stabilized with a sturdy umbrella base to maximize safety in windy or inclement weather. Some freestanding umbrellas, including umbrellas designed to be used with a dining table, include a base in their design, and will not require additional support. To determine what weight of base your umbrella requires, consult our sizing chart below:

    Free Standing Use

    100 lbs.

    Umbrella Covers

    Umbrella covers protect your investment from wear, sun discoloration, and other damage when not in use.

    Lights

    Certain umbrellas may be accessorized with lighting fixtures along the ribs or surrounding the pole. Lighting can provide greater visibility and ambiance to your patio after dark.

    Replacement Parts

    PoleThe umbrella pole is the upright, central component of the umbrella, that extends vertically from the ground to the filial. The pole determines the height of the overall umbrella and lends support and strength to the structure of the umbrella design. Umbrella poles can consist of two components connected together, or one single rod.

    Don’t Miss: How To Install A Sliding Screen Door Track

    Patio Umbrella Basesoutdoor Umbrella Stand Guide

    Patio umbrella bases come are available in a variety of weights and material – from granite to plastic. They serve an important purpose of keeping your umbrella from being lifted up out of the hole or from tipping over from the wind. It’s not easy to find the heavier bases at your local home improvement stores.

    To determine the right outdoor umbrella stand for your pool umbrella you will need to know:

    1. The size of the umbrella canopy

    The most common umbrella sizes range from 6′ to 12′.

    2. Where the umbrella will be used

    Free standing umbrellas require a heavier stand than one that is resting inside a patio umbrella table. A table offers more stability from gusts of wind or windy days.

    3. The diameter of the umbrella pole.

    The most common umbrella pole size is 1.5 in diameter, but can range anywhere from 1 1/8″ to 3.

    How To Measure Patio Umbrellas

    First, open your umbrella and make certain its completely extended. Then measure from the top of the patio umbrella along one of the ribs or arms that extent from the center hub. Measure that distance from the center hub to end of the rib or arm. Then simply multiply that number by 2, that is the size of your umbrella.

    For example, if your umbrella has ribs that are 5 feet long, then you have a 10 foot patio umbrella. Remember patio umbrellas are measured by canopy width not overall height.

    Another important measurement to know is the Crank Height.

    This measurement is called the crank height. You may need to know this if you are buying an umbrella for a taller table, like a bar height table.

    The Crank Height is the distance from the base of the umbrella pole to the cranking mechanism, if it has one. The beautiful patio umbrella featured in our graphic, is the BambrellaLevante Center Pole, it doesnt not have a crank, but many center pole umbrellas from our Galtech collection do, so the Crank Height can be an important measurement. Why? Well consider if you are going to be using your umbrellas in a table, the height of your table needs to be shorter than your Crank Height.

    Read Also: Mold On Outdoor Cushions

    What Kind Of Umbrella Base Do I Need

    umbrellawantbasebaseshouldumbrellaHow to Measure a Patio Umbrella

  • Open the patio umbrella so that its shade canopy is fully extended.
  • Using a tape measure, measure along one of the rib arms on the top of the patio umbrella from the center to the outside edge.
  • Multiply that number by two and this will give you the correct size of the patio umbrella.
  • How to Measure a Patio Umbrella

  • Open the umbrella so that it is fully extended.
  • Measure the top of your umbrella along one of the rib arms. Use a tape measure to measure from the top center to the outside edge.
  • Multiply that number by two.
  • Take another measurement from the base of the umbrella pole to the crank mechanism.
  • Pound Cast Iron Umbrella Stand

    Patio Umbrella Stand Vintage Finish Outdoor Table Pole 30 ...

    A cast iron umbrella base provides a decorative and sturdy base for any patio umbrella. They are heavy, provide lots of weight and are long lasting.Many people like the look of a cast iron umbrella stand – including me. But I don’t like how quickly they rust and peel.

    Amazon carries a variety of cast iron umbrella stands that are often less expensive than buying them at a store. Or as in my case, I bought an outdoor umbrella on line and expected to buy an umbrella base at a local store. Would you believe that by the end of July all of the stores like Home Depot, Lowes, and Target were all out of umbrella stands?

    Amazon provides a great selection – much better than any local home improvement store. Many of them offer free shipping which is amazing. This cast iron base weighs 40 lbs.

    Also Check: How To Remove Mildew From Patio Furniture Cushions


    RELATED ARTICLES

    Most Popular