Anchor A Gazebo With Planters: With Diy Planter Box Plans
Home » Anchor a Gazebo with Planters: With DIY Planter Box Plans
Sharing is caring!
Learn how we built four easy DIY flower boxes to go around our gazebo posts to help weigh the gazebo down. Get the DIY Planter Box Plans!
Last summer we decided to have some hardscaping added to our backyard. Wed like to add a deck eventually, but that was well over our budget. It made sense to add a smaller patio area, then eventually attach the deck and patio with more hardscaping. It will be AWESOME when the whole thing is finished.
In the meantime, we finally got the gazebo set up on the new patio but this brought up an IMPORTANT question
Diy Square Gazebo Plans
With this video guide, you are going to be making a square gazebo with a full building plan that is available in the video guide link description. With that building plan, there is a step-by-step instruction that will guide you on the high-quality tools to use and materials that will be perfect for that gazebo build.
Mark The Posts For Cutting And Trim To Length
The length of the posts is determined based on the offsets measured in the previous step. Begin by marking each post “A” through “D”, and then measure from the bottom of the post the offset length you previously recorded for each. Use a square to transfer this line across the width of the post.
Next, start with the longest measured offset – let’s say 10″ for instance. The posts are 8 feet long, so the “leftover” length is = 7′-2″. Measure the “leftover” 7′-2″ from the offset marks you previously made on each post, and mark these at the top ends. Use a square to transfer this mark all around the posts so that you have a cut line wrapping around the post.
Using a circular saw, cut along this line on each post, then flip the posts to cut the opposite face from the first cut. Use a reciprocating saw to finish the cut, assuming that your circular saw doesn’t cut all the way through with the first two passes.
You May Like: How To Paint Wrought Iron Patio Furniture
Will A Gazebo Add Value To My Home
Most of the time, any addition you make to your home will increase its value. Adding a unique gazebo creates something your home has that other homes in your neighborhood might lack. This exclusive feature will stand out to potential buyers and fetch higher value offers. It may also make it easier to sell your home in general.
People like to spend time outdoors while maintaining privacy, so a gazebo is a nice bonus if you are looking to sell your home. Just how much your gazebo will increase the value of your home depends on factors like demand, the materials used, its appearance, upkeep and how many other homes in your area have one.
Nail The Roof Decking
- Nail the roof decking to the rafters with 8d nails.
- Be sure to screw the steel strap to the lower roof boards for extra support.
- The strap ties the narrower boards together to prevent sagging.
- Cut your lower fascia from 1×10 cedar. Hold it 7/8-in. above the ends of the rafters so your roof decking will be flush with the fascia.
- Rip 5-1/2-in. decking in half for the first seven courses so they’ll be able to bend around the lower curved section.
- Cut each end of the decking at 22-1/2 degrees for the first course and change the angle slightly until you finally reach about 16 degrees for the rest of the full-width courses.
Recommended Reading: How To Remove Mildew From Patio Furniture Cushions
Place Traverses On The Wooden Supports
The next thing that you need to do is to fix a wooden traverse on the two supports. It should run from one support to another support along the shorter side. Also, the wooden traverse should be placed on the wooden supports in a strategic manner the sides of the transverse should hang from the support at an equal distance.
Once you finish fixing the traverse on the right positions, fasten it to the wooden columns using screws. Make sure that the screws are long enough to hold different pieces of timber. You can also use corner brackets
How To Anchor A Gazebo To Pavers
Gazebos need to be properly secured to the ground in order to avoid accidents. There are basically three ways in which you can anchor a gazebo to pavers: drilling them directly into the pavers, driving concrete footers between pavers, or using weights.
Gazebos are often the centerpiece of a hardscape design, and is not unusual to see even an entire project based on one. So it is extremely important that this piece is properly secured and stable.
This stability is harder to achieve on pavers, since they are not strongly attached to the ground, but it is for sure doable. Were going to guide you through three ways in which you can provide this security and safely anchor your gazebo on a paver surface.
Also Check: How To Fix Hairline Cracks In Concrete Patio
Made In The Shade Gazebo
This gazebo adds insanely practicality and comfort to the household and naturally every homeowner wants to construct one in their yard. This can occupies a huge space in one`s garden, space traded for plenty of room to place furniture that will boost comfort, you are building another room in which you can soothe your nerves at the end of the day. People can have fun with the family in these settings, all seasons can be actually enjoyed comfortably sitting in this gazebo if you close its sides.
Notice how the gazebo is in a direct relation with the brick deck.
Washing Machine Turned Fire Pit Blueprint
This creative builder made a simple fire pit out of an old washing machine and mattress frame. He removed the drum and bought some steel rods, flat bars, and spray protective enamel. Then he cleaned the drum and sanded it down.
The bed frame was cut into pieces that would become the legs, and he welded these to the drum before painting it. He even twisted the steel rods to spell out his familys initials and mounted that to the shaft.
Read Also: How To Make A Paver Patio On A Slope
Building The Patio Cover
I realized, too late, of course, that I didnt take a good before picture for this project, but the above step 1 shot will do the trick, I think. You can clearly see the concrete pad we had to work with it measures about 12 feet deep , and about 24 feet long. It was also slanted, in order to guide water away from the house, but I did not realize how slanted it was! Chels said she had always noticed the dramatic slant , but upon measuring it, I found it dropped a full four inches from the house to the grass! Four inches over twelve feet was much more than I bargained for when I was drawing this project up on my notepad, and I knew that compensating for it was going to be a fair amount of work
The first part was relatively simple. Before erecting the 4×4s, I cut the ones closest to the house down about four inches so that the tops of the posts would be level front to back. I attached plastic post anchors to the bottoms of the 4×4s, and then secured the plastic post anchors to to the concrete using my hammer drill and nail-in concrete anchors. The plastic posts do a couple of things for you first, they make it easy to mount, erect, straighten, and level the 4×4 posts. Secondly, they keep the post itself elevated off the concrete just slightly, so the post base will never be sitting in water as time goes on.
Cut The Posts To Length
- Bolt posts to the steel strap anchors. Here’s how to do it:
- Make the anchors by cutting 12-in. lengths of 1/8-in. x 1-1/8 in. steel and boring 7/16-in. dia. holes into them as shown in Fig. B.
- Pro tip:You can find steel stock next to the threaded rod at your home center.
Recommended Reading: How To Build Patio Steps Using Pavers
Creative Diy Backyard Fire Pits
The Spruce / Christopher Lee Foto
Nothing says cozy and comfortable like flames crackling in a backyard fire pit. Imagine gathering with friends and family sipping wine, roasting hot dogs, and making smores around your own fire pit during cool summer nights. Relax and have fun knowing that you spent very little on the DIY project, because you made it using inexpensive materials.
Nearly every fire pit in this gallery costs between $50 and $150. The secret to these super-low costs is the basic building materials used to form the fire pits, such as bricks, pavers, concrete, and retaining wall blocks. Other types of fire pits can be made using repurposed materials such as metal planters, flower pots, and even glass.
Read Also: Repairing Patio Umbrellas
Tis The Season To Get Outside
This is the time of year it starts feeling like summer, even though officially its still spring. Which means its time to get outside before it gets too hot to enjoy it! I cant wait to share this post with you today as part of Remodelaholics Get Out! Outdoor DIY Challenge.
We havent done much to our backyard since moving in two years ago, but this summer thats all about to change. As much as I love interior decor, I also love to get outside and enjoy the amazing Albuquerque weather as often as possible. When you get about 300 days of sunshine a year and almost no bugs, you should take advantage of outdoor living!
Don’t Miss: How Many 60# Bags Of Concrete In A Yard
Assemble The Rafter Sections Before Hauling Them To The Roof
- Lay out the rafter parts on a large flat area like a garage floor or a driveway .
- Fasten the upper and lower rafter to the 1×2 with 2-in. screws.
- These rafters run parallel, with a 14-1/2-in. space between them.
- Next screw part P into the sides of the upper and lower rafter so that it’s parallel to part L.
- Build the rest of the assemblies and then mount a pair to the center hub .
- Follow steps 10 through 12 to mount the rafter assemblies to the top plates.
Attach Two Opposite Rafters:
- Attach two opposite rafters to the center hub.
- Then grab a partner and carefully walk the assembly up to position.
Anchoring Aluminum Pergola To Paver Patio
Id like to install an aluminum 16 x 12 pergola on my existing paver patio and Im wondering the best way to anchor it.
It comes with brackets to bolt the posts into concrete, with the bolt holes in a square pattern . For each post Im thinking to use a 12 diameter sonotube with fast setting concrete, set 36 deep .
Im not sure whether the top of the concrete column should be level with the ground beneath the pavers, or level with the top of the pavers. Im leaning towards the top of the concrete being beneath the pavers, so the molding that goes around the bottom of the post sits on the pavers for a clean look, rather than seeing a concrete circle under each post, and challenging myself to not mess up cutting an arc in my paver stones to fit around the concrete column.
If I do this, Im also thinking to recess the concrete a little below the ground under the pavers to leave some extra space for the concrete bolts that will be sticking up, otherwise those bolts would elevate the paver stones above it to be higher than the rest.
If I do this, can I just put down a layer of sand above the concrete to have a flat surface for the pavers above it?
This is my first time doing something like this, so Im mainly looking for someone to confirm my plan is sound, or offer any suggestions of a better way.
Zncmrr Canopy Water Weight Bag
Made from 500D PVC these water-filled weight bags are guaranteed not to rip, enabling a leak-free experience. Each bag can contain up to 10L of water which equates to 20lbs of weight.
The ZNCMRR Canopy bags are easy to use, just fill with water and attach to your pole using the hook-and-loop straps.
When empty the water weight bags flatten to a handy space-saving size ready to be stowed away to be used again another time.
The bags can also be filled with sand if water is not an option.
Insulated Fire Pit Barrier
These fire pit barriers are available in both square and octagonal forms.
The barrier consists of a vented metal tray raised about half an inch off the ground by five rubber/plastic feet. The tray is made of heat-resistant natural and synthetic fibers, and it will hold the fire pit.
These are not the most visually appealing fire pit barrier solutions available, but the reviews are typically positive. When looking for deck protection, the Trex endorsement should be taken into account.
Unlike the previously mentioned all-metal platform option, there are various sizes available to accommodate most sizes and types of fire pits, with extra space on the perimeter to permit some unintentional/intentional movement of the fire pit without the tip-over risk.
Read Also: Build Steps With Pavers
You May Like: Diy Deck Boxes
Measure Out The Surface Area
Using a measuring tape, measure out the area that will be covered by the gazebo. You will need these dimensions to create a foundation of sorts and to lay weed barrier. It also helps you envision the yard with gazebo.
Level the ground
A level foundation ensures stability and is pleasing to the eye. You will want help for this. Using shovel, dig the dirt from the high spots and use it to fill any low spots.
If installing a wooden floor, where do you want that floor to sit? You can dig about five inches down into the earth and level that area. It is useful to also compact the area if you can.
How To Build A Pergola Over A Concrete Patio
One of the best things you can do is build a solid pergola in your backyard. This can provide additional shade and ambiance to your house or a good attachment.
If youre looking for the right instructions on how to build a pergola over a concrete patio, Ill show you how. However, we know youll need a few covers and tools to begin.
Read Also: Flagstone With Grass In Between
Free Rectangular Gazebo Plans
It is a truly fantastic idea, to build your own gazebo with your loved ones. Not only does a gazebo fit perfectly to your backyard and make it unique. But knowing that you built the gazebo, makes it even more special. If you do decide to build a gazebo, then check it is done right. It is better to put a bit of extra effort in and spend a bit of more money. Building a gazebo, should be a special project for you and your family. When you construct your gazebo ,then everyone is going to see it . And if it doesnt come out the way you expected because of free gazebo building plans. You need to ensure that your very own gazebo turns out perfectly.
There are plenty of people who want to know how to make a gazebo. These small buildings fit right in to a very beautiful garden. Building a gazebo yourself brings you satisfaction and a place to hang out. Often people have happy memories from their childhood of gazebos. If you have happy memories with gazebos as a child playing and having fun. And they want to experience something similar again and why not? Building a summerhouse can be somewhat expensive for some folks. If there was a possibility to have free gazebo building blueprints online, then why not? But if you want free gazebo building blueprints, then there are some downfalls to that.
Constructing the gazebo floor
The gazebo plans most of all need to be detailed
There are so many different varieties of wooden gazebos
How To Anchor A Gazebo To Concrete Pavers Or On Grass To Secure Your Gazebo From Wind
Worried about your brand new gazebo flying away? You dont have to anymore!
Simply follow my step-by-step tutorials on how to secure a gazebo from wind, and you will get the best results ever! See for yourself!
Building a safe and protected home has always been my number one priority. This includes securing a gazebo to a stable surface to keep it from blowing away. Trust me, that innocent gazebo of yours can quickly turn into a health hazard if not anchored properly.
This prompted me to write a complete guide for securing a gazebo on concrete, pavers, and grass. With the help of my tutorials, you can now turn your gazebo into a safe shelter that youve always dreamed of having. Take a look!
Recommended Reading: How To Take Patio Screen Door Off