Sunday, May 26, 2024
HomeBuildHow To Build A Patio Storage Box

How To Build A Patio Storage Box

How To Waterproof A Wooden Box

Table of Contents

Wooden boxes have a wide range of uses; they can be used for storage purposes especially if you have old belongings that you dont want to throw away. They can also be used to plant a wide range of flowers and other exotic plants.

The reason wooden boxes are used as a planters box is that they blend well with nature due to its natural appearance. Wood is permeable, which means it soaks up water. When this happens, it rots and compromises the structure of wood, which weakens it. Water is not the only element that contributes to wood damage. Ultraviolet rays from the sun are known to be harmful not only to human skin but also to wood.

To protect the structure and integrity of a wooden box, you need to waterproof it. The process is not difficult, and you can accomplish the steps using a few supplies which can be found in your garage. Other items can be bought at a hardware or home improvement store.

Diy Outdoor Bench With Hidden Storage

Start enjoying daydreaming by sitting on the calming DIY outdoor bench. It will provide hidden storage for kids toys and also for your reading books. It enchants with the white skirt lining and also with the white-painted edged top. Get busy with 2x4s, 1x4s, and 1×4  cedar fence pickets to build this bench.

Diy Mudroom Bench And Storage

Willing to stylishly organize a mudroom? Then do get here the most amazing IKEA hack for it. Combine the IKEA Hemmes TV Unit with wall shelves to get this mudroom storage bench. The DIY bench seat comes with 2 drawers and with slim cubbies to hold the shoe pairs nicely. Add custom storage and hanging options more just above the bench for an amazingly functional mudroom.

Build A Diy Outdoor Storage Box

Note: This tutorial contains affiliate links, but all opinions are 100% my own. 

Create a stylish way to store outdoor décor with this slatted deck box. While creating the louvered look may seem complicated, Im here to tell you, its as simple as tilting the slats. Even better, assembly requires little more than a saw, drill, and a Kreg Jig. I recently just switched from the Kreg Jig R3 to the K4 , but you can use either.

GIVEAWAY ALERT: Im teaming up with Kreg Jig to give a Kreg Jig K4 Masters System to one lucky Build Basic Subscriber! Contest ends June 11th, 2015. Click  to learn more!! GIVEAWAY UPDATE: This Contest Has Ended.


1. Cut the Parts


2. Prep the Slats

Tip: Check out my new tutorial on How to use Kreg Jigs K4 featured in this tutorial.

3. Position the First Slat

4. Attach the First Slat

5. Continue Attaching the Slats


6. Measure and Cut the Divider


7. Attach the Divider


8. Assemble the Panels


9. Prep the Rails


10. Install the Rails


11. Attach the Rail to the Divider


12. Double-up the Top Rail


13. Add the Cleat


14. Add the Side Rails and Slats


15. Assemble and Add the Back Panels


16. Attach the Sides to the Back


17. Double the Side Rails


18. Insert the Floor Boards


19. Position the Floor Boards


20. Layout the Lid Pieces


21. Assemble the First Pieces


22. Assemble the Lid Boards


23. Attach the Lid



Easy To Build Diy Storage Bench Plans For Beginners

May be better if it weren

Build a storage bench for your mudroom, foyer, hallway, or outdoor using these 25 free DIY storage bench plans, providing hidden storage to stash your extra stuff. They are an ideal choice of benches when bringing a big functional character to a space in demand. These DIY benches with storage are not specified to narrower or short-spaced interiors. They will be a cool addition to spacious interiors, too, where an elegant style of living is to follow. Whether you need to redesign your mudroom or willing to add hidden storage space to your patio, these 25 free DIY storage bench plans will help you build a variety of storage-benches suiting your custom needs.

Moreover, to build each of these DIY storage benches like a pro, you will get free diagrams, picture tutorials, and step-by-step instructions. This not end here; you will grab the free cut lists and hardware guides too as a big bonus.

These DIY bench designs start from a simple box to a super functional L-shape corner storage bench. Most of the designs come with hinged bench seats, and some come with removable tops to reveal the secrete built-in stashes. Use all leftover, recycled, and new wood to do these bench constructions, which will enhance your woodworking experience. Finally, you will get the upholstering guides too to upholster the bench seats for a maximized sitting comfort.

Diy Backpack Storage Bench Plan

This backpack storage bench plan will rock for both indoor and outdoor spaces. It comes with hinged lids and also with fine built-in storage compartments. Build this bench using 1×10, 1×3, and with 3/4 plywood. Use 72 piano hinges for the tops. The finished bench is 74 long, 18 wide and 19 1/5 tall.

How To Make A Shoe Storage Bench

Bring a great functional character and style to your mudroom with this one-of-a-kind shoe storage bench. Build this bench using 2x10x8 and go with the 1/2 x 10 copper pipes to build underside shoe storage shelves. Provide weather protection to wood gain by giving a polyurethane finish. diy dunnlum

Diy Storage Bench With Leather Cushion

Build the bottom box of this small bench with storage using 2x4s and 2x8s boards. Use a piece of plywood to build the evenly flat top lid of the bench that will be your seat too. Also, upholster the plywood seat using leather and foam and enjoy a DIY bench seat with hidden storage under the seat. Details of storage bench plan here

How To Build Waterproof Pool Deck Boxes For Storage

Waterproof pool deck boxes offer a great place to store things while ensuring they dont become wet, either from the pool or the weather. You can buy them, but its easy and a great deal cheaper to make your own. You dont need extensive carpentry experience to make the box look good, and the construction process is easy.

Step 1 – Decide on Position and Size

Begin by deciding where you want to put the boxes and the sizes you want them to be. Next, put concrete blocks at these locations to be both the bases for the boxes and the corners underneath them.

Step 2 – Cut the Pieces

You will need to cut the wood down to size for your boxes, so measure out the dimensions on the plywood, make marks with a pencil, and use the saw to cut out the pieces. You want all the sides as well as the top and bottom.

Step 3 – Assemble the Box Walls

Start putting together the walls of the box with waterproof glue on the ends of the long pieces. Attach these to the shorter pieces, press in place, and then use nails to secure even further. Wipe up any excess glue. You need to make sure that all the corners are square and that the sides are even. A carpenter’s square and a level across the top of the sides will make sure of this.

Step 4 – Add the Box Bottom

Step 5 – Reinforce the Corners with Braces

Step 6 – Attach the Lid

Once the project is fully assembled, paint it or finish it with a waterproof sealer. Then,

Prep And Cut The Outside Cladding

I love using cedar fence pickets for projects like this. They’re an inexpensive way to enclose a box or space with weather-resistant lumber. Dig through the pile to find the best pieces with minimal knots and flaws. I’ve unearthed some beautiful cedar from those giant stacks!

If you don’t have a table saw to rip these boards to the different widths, you can buy 5 1/2″ and 3 1/2″ fence pickets to get a similar look. You’ll just have one narrow strip in the middle instead of two. I’ve used this pattern in lots of other outdoor projects , and it’s become my signature look!

Cut the cedar fence pickets to roughly the length of the sides of the box. You’ll be trimming them all to fit later, but the shorter lengths are easier to handle. I just stack them up and chop ’em all at the same time!

Sand down all the boards to remove the rough, splintered surface. I went one step further and used my and to flatten the boards and reveal the gorgeous grain underneath.

Next, cut the pieces to the desired width. The pattern I used has 5″ strips on the top and bottom, with two 2″ strips in the middle.

I ripped them down to size on the table saw, using a to hold those small pieces tight against the fence.

Those rough fence pickets clean up nice! I picked out the best ones to be installed on the front and left side of the storage box where they’ll be seen from the street.

Repurposed Wood Storage Bench

Last, from Twig Decor, they used an old door and headboard to repurpose into a DIY outdoor bench with storage. Ok, could this have looked any more amazing? I would love to see it still as a headboard too!

So create a more organized outdoor space with these DIY outdoor storage benches! Be sure to Pin your favorites so you can find the tutorials later when you need them! We think you will also love our posts on DIY Outdoor Dining Tables and Super Easy DIY Firewood Racks! Also see our posts on Small Storage Shed Ideas and DIY Mudroom Ideas  over at OhMeOhMy

Step 1 Prepare The Boards

  • Make the cuts per the cut list in the .  You can easily modify the plans to change the size of the box if needed.
  • Sand the boards smooth.I like using my orbital sander with 150 grit sandpaper. You can also use a sanding block. The advantage of using redwood is that if you pick the boards carefully, they are already pretty smooth and good to go.
  • This is also a good time to stain the boards because the slatted design will make it hard to get into the tight spaces later.

If you plan to paint, do not paint it because wood glue doesnt work through the paint.

Step 5 Attach The Bottom

Top 10 Types of Outdoor Deck Storage Boxes

Attach the bottom to the box using exterior 2-½ wood screws. Make sure the pocket holes for the bottom face outside so the inside can smooth.

This is also a good time to attach the casters.  are totally optional, but I like having the option of rolling the box to wherever it is needed. Of course, be sure to pick casters with brakes!

Storage Bench Plan With An Aztec Inspired Design 20

This modern bench plan will fancy up any space, and it impresses with the Aztec inspired design pattern. Get busy with the 1×12 and 2×12 in your woodworking shop to achieve this very enchanting modern storage bench. It stands on accent metallic furniture feet and will help tidy up space with built-in storage drawers. Free plans here

Make A Bench With Built

Update and organize your mudroom by adding lots of sitting and storage space that this single bench will provide. It comes with built-in storage and can quickly be made using 3/4 thick 4×8 hardwood ply and 1/8 DPI board having 4 x 8 size. The built-in storage compartments come with sliding doors. Details here

Cutting List Deck Storage Bench Diy

  • 1/2-inch plywood sides 16 x 18 inches.
  • 1/2-inch plywood front and back 16 x 47 inches.
  • 3/4-inch plywood top measure for final size.
  • 1/2-inch plywood bottom, 18 x 47 inches.
  • Frame stiles 1 x 2 x 12 1/2 inches.
  • T1-11 cedar siding measure for final sizes.
  • Frame rails 1 x 2 x 17 inches.
  • Frame rails 1 x 2 x 44 1/2 inches.
  • Bench feet 2 x 2 x 18 inches.
  • Backrest supports 2 x 6 x 29 1/2 inches.
  • Backrest 1 x 4 x 48 inches.
  • Top trim 1 x 2 cedar
  • Corner trim cut from 2 x 2 cedar.

Part 2 Of 3:assembling The Garden Box

  • 1Lay out your lumber flat on the ground in the shape of the box. Use 2 4 ft long and 2 8 ft long 2 in by 12 in pieces of lumber for the sides of a standard 4 ft by 8 ft garden box. Lay them out flat in the shape of the box with the corners touching.XResearch source
  • You can do this either over the prepared site for the box, or off to the side if you have the space. Keep in mind that the frame will be quite heavy after you assemble it.
  • If you are making a garden box of a different size, just adjust the lengths of the lumber for the sides accordingly. 12 in is the ideal height for raised garden beds so that the plants have plenty of room for their root systems.
  • Use a natural wood that will endure the elements well, like cedar, if you want your garden box to last a long time. If cedar is too expensive, then you can use cheaper pressure-treated lumber that will withstand the elements for many years.
  • Warning: Dont use old railroad ties or any other lumber that has been treated with creosote, which is toxic.

  • 2Screw the sides together 1 corner at a time. Pick a corner to start in and turn the pieces of lumber on their sides so they are sitting against each other, with the end of 1 piece square against the inside corner of the other piece. Use a drill to put a 3 in screw every 4 in through the outside piece into the end of the inside piece to hold them together.XResearch source
  • Fill Up Your New Diy Outdoor Storage Box

    I cleared out most of the junk from the old box, so we’re just left with a few umbrellas and my son’s play swords.

    Now there’s plenty of room for packages, which are hidden from view from the street.

    From the front, you can’t tell that there’s anything inside.

    Our front porch looks so much better now! The planter and the storage box tie in with the doormat and my newly built screen door perfectly, so the whole space feels more cohesive.

    So what are you waiting for? Download the woodworking plans for this DIY outdoor storage box and get building!

    Check out these other outdoor projects!

    Outdoor Storage Box Plans


    This step by step diy woodworking project is about outdoor storage box plans. Building a storage bench for your backyard is easy, as you just have to follow proper instructions. First of all, we recommend you to take into account the alternatives and to choose the one that best fits your needs and tastes. Dont forget that you could also adjust the size of the storage box, but still use the instructions as a reference.

    It is necessary to use weather-resistant lumber, especially if you want to place the box in your backyard. Pine, cedar or redwood are excellent choices, as they are durable and they will add character to your project with their exquisite look. From our experience, we strongly recommend you to use a pocket holes system, as to get rigid joints and to hide the head of the wood screws.


    Diy Storage Bench Beginners Plan

    You need the beginner skills to build this storage bench, and it will take only a few hours to be right in your backyard. The bench looks like a bigger box with a hinged lid. Make it using 1×4, 4×4, and hardware cloth fencing and opt for durable hinges for easy opening of the heavyweight top. Details here

    Pine Storage Bench With Four Cubby Holes

    Garden Storage Boxes

    If looking for the super functional DIY storage bench seat that will help in the interior organization too, then look no further and build this pine storage bench with 4 cubby holes. It also provides hidden storage under the seat, and the seat lid is hinged in place. Stuff the weaving baskets in the built-in square cubbies for dust-free built-in storage.

    Part 3 Of 3:adding Soil To The Garden Bed

  • 1Cover the bottom of the bed with a layer of landscape fabric. Use weed-suppressing landscape fabric to cover the whole bottom of the garden box from side to side. Make sure the fabric extends right to each side of the the wooden frame.XResearch source
  • For example, for a standard 4 ft by 8 ft garden bed, you need to get a piece of landscape fabric that is at least that big.
  • Landscape fabric usually comes in rolls that are at least 3 ft wide, and you should be able to get the amount you need cut to size at a garden center so that you don’t need to buy a whole roll.
  • This will keep weeds from sprouting up from the ground soil and into your garden.
  • 2Fill the bed with a 50/50 mix of planting soil and compost. Use about 3-4 2 sq ft bags each of compost and planting soil. Pour it all into the garden bed and mix it together with a garden fork or spade.XResearch source
  • You can get planting soil and compost in bags or in bulk at a garden center. Buying in bulk is usually cheaper.
  • 3Rake the soil smooth and spray it with a hose to settle it. Use a rake to even out the top of the soil so it is more or less flat and either flush or just below the top edge of the garden box frame. Lightly spray the whole top layer of soil with water from your garden hose to tamp down the soil.XResearch source
  • Your garden box is now ready for you to plant your vegetables!
  • Corner Bench With Storage And Seating

    Update your mudroom and any outdoor area like a porch, deck, or balcony space with this corner bench. It provides storage-in the seats. Build this sturdy L-shape bench using 2x6s and 2x4s and garnish the sides with 20 x 20 x 20 square planters. Cushion this bench and let it be around an outdoor fire pit too.

    Rustic Storage Bench With Plywood

    Rock your indoor spaces with this stylish wooden storage bench, will be a smart rustic addition to any of your indoor. Build it entirely with the 3/4 plywood, and it will allow storage in the seat that is hinged in place. Paint it or leave blank in the gorgeous blank wood appeal. Cut list and storage bench plan here

    Cut And Attach The Bottom Of The Box

    The inside of the box isn’t quite wide enough for three full fence pickets. I cut the first two down to size, then measured the gap in between. I wanted a bit of space between the slats to make it easier to clean out the bottom , so I subtracted 1/2″ from the gap measurement to allow for 1/4″ spacing on either side.

    Attach the bottom slats with brad nails along the supports.

    Functional Kids Room Storage Bench

    This corner L-shaped bench comes with a built-in storage compartments underside. Stuff the storage compartments with well-fitting weave baskets to get the most secured type of storage in the bench. Build the bench using 2 sheets of 4 x 8 MDF board and with 1 sheet of 4 x 8 OSB sheathing. Finish the seats with foam you can adhere in place using a spray adhesive.

    Prepare The Wooden Box

    A majority of wooden boxes are built with pressure-treated or untreated lumber. To prepare the box for waterproofing, you need to set it on a flat surface in a room. Let it rest for two to three weeks, especially if it has recently been assembled. This is done to allow the wood to dry properly and not seal in moisture. The waiting period also helps prevent the need for sealing joints in case they were to expand.

    Treated wood is known to last longer, but it contains chemical preservatives, so you will need to take more care when cutting. If you are going to use the wood as a planter box, drill 4 to 6 holes at the bottom of the box, especially the central plank. They should be ¼ in diameter. This allows any excess water to drain from the soil of your plant.

    Charming Diy Outdoor Storage Ideas

    Outdoor storage, it seems like it is always an issue. Storage in general seems like it is always an issue. Either there is never enough of it or there is no good way to store your tools, cushions, outdoor cookware, pink lawn flamingoes, etc. It is an ongoing problem with hundreds of solutions, but how do you know which ones are the best?

    The customizable ones of course! Here we have found some unique and creative ways to tackle a multitude of outdoor storage situations. Even better, every one of them is a DIY project that could be tackled in a single weekend and customized to fit whatever your needs may be!

    We have scoured the internet for an array of outdoor storage solutions and we have compiled 10 of the best affordable, easy-to-follow DIY storage projects we came across. From ingenious bike storage, to simple sheds, and even a hanging outdoor mini bar, there is a little bit of something for everyone here. We even included a few purchasable options for the less handy of us out there.

    Hopefully you will find something here to inspire your next outdoor project. We know we did!

    Diy Mudroom Storage Bench

    How to Build an Outdoor Storage Bench (DIY)

    This farmhouse style will be an excellent addition to a modern or farmhouse mudroom. It comes with built-in basket storage and is an easy woodworking project. Build this DIY bench using 3/4 plywood, 1x2s pine boards, pine corbels 9.5 x 9.5, MDF crown molding, and lattice. Finish the storage-friendly bottom with primer and stain the top for a dark choco appeal.

    Attach The Cladding To The Frame

    Start with the short ends of the storage box first. I stood the frame upright to make it easier to work on.

    Mark the exact width of the top slat from underneath with a pencil, then cut it to fit. It should be flush with the outside edges of the frame.

    Apply wood glue on both ends where it will come into contact with the frame. Make sure you use waterproof wood glue like , or your box will start to come apart after the first rainstorm!

    Use a clamp to hold the slat aligned with the top and sides of the frame while you nail it into place.

    The slats are 1/4″ apart, so I used a scrap of 1/4″ plywood as a spacer. Place the next slat tight against the spacer, mark the ends, and trim them to fit.

    Repeat the process down the side of the box. The bottom slat should be at or slightly below the bottom of the frame. Then flip the frame over and complete the other short end.

    The longer sides cover the cut ends of the shorter cladding pieces. These fence pickets can vary slightly in thickness, so it’s always better to cut them to fit rather than all at the same time beforehand! Line up one side flush with the end first.

    Mark the other end from underneath like before. Cut the slat to fit, then attach it to the frame with exterior wood glue and brad nails.

    You don’t have to use the spacer for these long pieces. Just line up the edges with the side pieces!

    Now it’s starting to look like a storage box!

    Assemble Front And Back

    Use 1″ pocket hole screws and a drill with screwdriver head to assemble the four sides and the lid of the storage box. The front side is assembled by attaching twelve 15″ slats to one of the 51 3/4″ boards. Use a piece of scrap 1×4 to space the slats 3/4″ apart, beginning at one end of a 51 3/4″ board with a space, then a slat. Repeat until all twelve slats are attached, then attach the other ends of the attached slats to a second 51 3/4″ board to finish the front side. Repeat to assemble the back side.


    Most Popular