Saturday, March 23, 2024
HomeFurnitureHow To Build A Small Gazebo

How To Build A Small Gazebo

Concrete Slab Foundation Installation

DIY wooden Gazebo with deck using pallets | Patio Makeover 2020
  • Build the concrete slab frame: Using two-by-four lumber, build a wooden frame around the foundations desired area.
  • Dig: Excavate the area within the frame to the recommended depth of six inches.
  • Add gravel: Fill the excavation area with four inches of gravel or crushed rock.
  • Prepare the concrete: Mix the concrete according to the manufacturers guidelines.
  • Pour the concrete: Using recommended tools, pour the concrete into the gravel and then screed it to make it level and smooth.
  • Wait: Let the area dry within seven to ten days.
  • Is Wood Or Metal Better For My Gazebo

    Both metal and wood can be a long-lasting and durable material. Both can also corrode and decay quickly if you choose the wrong type. A wrought iron gazebo will be heavy, but sturdy and durable. At the same time, an aluminum one might get picked up in the wind. When building a wooden gazebo, it should be either hardwood or treated wood.

    More Must-Read Articles

    Prep Area And Build Base

    The first part of the structure that you will need to construct is the base of the gazebo. This will be made from a flat, smooth surface of concrete. Prepare the area and pour the slab to the desired size. If you want to add strength to the concrete flooring you may opt to add some metal rebar to the concrete slab.

    Next you will want to place the wood and metal supports into the concrete at a 90 degree angle. If there are any gaps between the metal and wooden portions of the support, use the tar and silicone to fill gaps to create a watertight seal.


    Repeat this step for all of the posts on your gazebo design. Typically this will be four, but if you choose a different design, you may be required to install more. After you fix all of your supports let the concrete dry and make sure they are sturdy and in place.

    Source: Instructables

    Don’t Miss: How To Remove Mildew From Concrete Patio

    How Do You Make A Gazebo Out Of Pvc Pipe

    How to Make a PVC Gazebo Purchase a cloth-covered octagonal gazebo top of your desired diameter. Assemble your gazebo top according to the manufacturers instructions. Assemble the top frame of your gazebo. Apply PVC cement to 1 inch of one end of each 10-foot long PVC pipe. Backfill each hole with flat sided gravel.

    Assemble The Tabletop And Shelf Frames

    Gazebos : Wooden Garden Shed Plans Compliments Of Build ...

    Cut the table frame ends and center braces to size . Use a square to mark a line on both posts up 41 in. from the slab. That will be the top of the frame. Install the ends 1 in. away from the outside edge of the inside post, and secure them with 3-in. exterior wood screws, two in each post. Measure and cut the table frame sides to size . Install the board with screws angled into the post. This keeps them from being visible after the top is installed.


    Measure the distance between the posts and cut the cedar 2×4 that will serve as the skirt nailer . Center it on the outside post, which leaves 1 in. on each side. This will make the skirt boards flush with the outside edge of the posts.

    Install the center braces 20 in. in from each post. Secure them by angling two screws into the side boards and one down into the skirt nailer .

    Cut the shelf frame ends and centers to size . Use a square to mark a line on both posts up 15 in. from the slab. That will be the top of the shelf frame. Install the end pieces so they overlap onto each post 1 in. Cut the shelf side boards . Secure them to the end boards with screws. No need to angle these screws because the outside screws will be covered with the skirt boards, and the inside ones are too low to notice. Install the shelf center boards, 20 in. in from both posts.

    You May Like: How To Remove Mold From Couch Cushions

    Item Have Been Added To Cart

    No one likes to deal with building permits, but they are usually required when building an outdoor structure. Building codes and regulations vary from one location to the next. In most places, a structure that is 100 square feet or less does not require a permit. However, check with the building permit office for local regulations in your area, to avoid getting a fine later.


    Before building any outdoor structure, contact your local utility company to check for underground utility lines. The number 811 is the federally designated “call before you dig” number. It’s there to help homeowners and professionals identify where underground lines are buried to avoid damage.

    Whether you have DIY gazebo plans or are assembling a pre-made kit, study your plans before you begin. A gazebo is a free-standing structure with open sides. It can be rectangular, round, oval but the traditional shape is octagonal. Some gazebo types include metal gazebos or wood gazebos.

    There are many sizes of gazebos to consider but the popular sizes are 10 x 10 gazebos or 10 x 12 gazebos. For more inspiration, take a look at Home Depot’s DIY gazebo kits for backyard gazebo ideas.

    Although gazebos vary in style, building one follows the same basic steps. Consult your plans to be sure of exact steps in building your gazebo.

    Install The Tabletop Shelf And Skirt Boards

    Cut the deck boards for the table top to fit between the posts at each end. Secure them with two 2-in. exterior-grade trim-head screws through each deck board. Keep the screws about 1 in. from the edges of the deck boards. Start with the table-top board closest to the inside, and line it up with the edge of the inside posts . Theres no need for a gap between the boards.


    Measure and cut the shelf boards to length. Rip two of them down to 4 in. Install the cut end flush with the outside edges of the shelf frame so theyre hidden by the skirt board.

    Cut the skirt boards to length. Center the first one between the posts and install it with two trim-head screws to the skirt nailer and shelf frame. Work your way in each direction, and trim down the last skirt boards to fit flush with the posts.

    Remove all the temporary braces and touch up all the cut ends of the boards with stain. All thats left is to slide your grill into place and invite the neighbors over for a party under your barbecue gazebo.

    Read Next

    You May Like: How To Remove Mold From Concrete Patio

    Wikihow`s Gazebo Versatile Construct

    WikiHow presents on their website a very simply gazebo frame that resembles a home, a really familiar and cozy structure worth considering.


    The super simple step by step tutorial invites you to personalize your setting as much as possible using the simple structure and after all, you ought to do that, you decide how you use your space, how much shade you need, how much you enjoy the wind in your hair.

    Gable Rectangular Gazebo Free Diy Plans

    Backyard Gazebo for $500 w/ Limited Tools

    This step by step woodworking project is about how to build a 10×8 rectangular pavilion free diy plans. This is a beautiful shelter that you can build for your grill or brick bbq. This gazebo features a sturdy structure that you can build with materials available in almost any lumberyard. The roof has a 8:12 pitch and it features 2×6 rafters every 16 on center. This structure is heavy duty, but please follow the building codes and hire a professional contractor if you dont have the right skills to undertake the project on your own. See all the gazebo plans HERE.

    We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pressure-treated lumber, cedar or redwood. If you use regular pine, I recommend you to apply the appropriate products to enhance its durability. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting.

    Recommended Reading:

    Read Also: How To Install A Sliding Glass Door In An Existing Wall


    Garden Gazebo Ideas For Creating Your Garden Refuge

    Gallery featuring pictures of 32 remarkable garden gazebo ideas that you can build or install right in your very own backyard.

    Welcome to our gallery featuring stunning gazebo garden ideas!

    Gazebos are a useful and pleasing addition to any yard. They provide a place to gather and a central focus point for your landscaping. They can act as a staging location for special events or simply a shelter away from the elements when you need one.

    There are many styles of gazebos made from many different materials, and there are many ways to incorporate them into your landscaping and yard design.

    A classic and timeless way to blend your gazebo seamlessly with your backyard space is to surround your gazebo with a garden. Incorporating your gazebo into your garden ties your plants and structures together.


    A garden gazebo can act as a gathering spot or as a place for you to go to admire the beauty and majesty of your garden and nature itself. They are ideal resting spots for relaxation as well as fantastic additional design elements to your garden and landscaping.

    Cut The 16 Corner Brackets

    • Cut the 16 corner brackets from 5/4 x 9-1/4 in. pine .
    • Pro tip:Note that there are eight left- and eight right-hand pieces.
  • Cut the corner braces from 5/4 pine.
  • After you cut the shape, bevel-cut one side with your circular saw set at 22-1/2 degrees.
  • Pro tip:Keep in mind that there’s a left and a right corner brace for each post.
  • Prime and paint these as well.
  • Nail the corner braces to the post and rail with 8d galvanized casing nails after you install the rails, lower balusters, upper pickets and all the cleats.
  • Use 4d galvanized casing nails to nail the cleats to the rails.
  • Also Check: How To Clean Plastic Furniture

    Enjoy Your New Gazebo On Your Preferred Gazebo Base

    At SOJAG, we have a variety of gazebos to suit your price point and construction preferences like soft top, hard top, wall-mounted, and barbecue gazebos. When you place one of our high-quality structures on a solid gazebo base, you can enjoy years of use. Whether you choose a wooden deck, sturdy concrete, patio stones, or concrete footings, your gazebo will be fully supported for years of functional use.

    Cut The Cupola Rafters

    How to build a gazebo?
    • Cut the rafters and the curved rafter tail buildups using the information in Fig. F.
    • Pro tip:Study Figs. A, E and F in the attachments at the beginning of this article.
  • Cut your lower rafters and screw curved rafter tail buildups to the ends of the lower rafter.
  • Cut the 1×2 inner and outer vertical rafter ties .
  • Notice that these 2×4 outer vertical rafter ties have slots cut in them to slip over the upper and lower rafters.
  • You can cut these slots with a table saw or circular saw, working from each end.
  • First cut one side with multiple passes and then flip the rafter tie over and cut multiple passes from the other side.
  • You’ll get an angled slope at the end of the slot from the roundness of the blade.
  • Recommended Reading: How To Keep Birds Away From Patio

    Lay Deck Boards From Outside In

    Lay the Decking

    To keep out insects, lay fiberglass screening over the base and staple it down. Lay deck boards from the outside in. Line up the outermost row of boards and screw the corners together. Walk around the base to make sure the deck boards overhang the rim joists evenly. Secure to the frame with 2-1/2″ deck screws. Lay down the next circle of boards and fasten them with screws. Continue this process with each circle of deck boards.

    Asemble The Spindle Walls

    Assemble the Walls

    Attach the 1″ x 4″ bottom brace into the dado with four screws. The kit will come with spacers that show you where to attach the spindles to the fillet. Attach the second fillet to the other end of the spindles. Stand it up and put the spindle section onto the 2″ x 4″ base, line it up and staple it down. Flip the spindle over and staple the rail cap to the other fillet. Assemble the upper baluster sections.

    Don’t Miss: How To Make A Paver Patio On A Slope

    How To Make A Summer Gazebo Yourself In The Country

    Some people prefer to build some kind of semblance in the gazebo summer kitchen, someone seeks to equip the place so that in the gazebo one can play chess or organize noisy gatherings and parties in good company. What your gazebo will be is completely up to you. But keep in mind that the less free space on your site, the neater and less it is to plan a summer gazebo. And to realize beautiful and original design can be quite easy. Then this will allow organizing the most pleasant atmosphere on the site due to the fact that everything here will be in harmony with each other.

    Back to the table of contents

    Attaching The Batten Boards

    Making a small gazebo – robot project

    Attach the Batten Boards

    Start at the bottom of the gazebo with the longest batten boards and work your way up. Assemble one pie wedge at a time, making sure the outside board is flush with the outside edge of the fascia board. Work your way around, securing the boards to both the main and middle rafters.

    Read Also: How To Remove Mildew From Patio Furniture Cushions

    Grill And Gazebo In One

    Why not just build a gazebo for relaxingwhile you can create one to house your grill? This is a clever use of space.The gazebo houses a grill and a backyard dining area as well. Built on a cementedarea in a yard or garden, the small gazebo has strong posts and ceilings andhas only two walls. Each of the walls was made to hold a small space to hold onto drinks, food and a few ornamental plants.

    Bar seats were in place on each outer faceof the wall where guests can sit and dine. The tall, triangular roofing of thisgazebo can shield the grill as well as the cook and diners from the sun andrain. The roof is made of decorative aluminum sheets so its verycost-efficient. This is an interesting and functional design that is quite aneasy project even for someone new to woodworking.

    How To Make A Small Cheap Backyard Gazebo

    A gazebo is a stylish landscape feature for backyards and gardens, providing a shaded peaceful retreat from the summer sun. Gazebos can shelter hot tubs, picnic or patio furniture or baskets of hanging plants and flowers. Homeowners can install large, elaborate screened gazebos or build small inexpensive backyard structures. With pre-cut wooden parts and some simple tools, you can build a cheap backyard gazebo to enjoy all summer long.

    Measure a 10-foot by 10-foot area and mark the corners.

    Video of the Day

    Dig a hole 2-½ feet deep at each corner with a post hole digger.

    Read Also: How To Stop A Patio Umbrella From Spinning

    How To Build Gazebo Railings

    How to build gazebo railings

    Building the balusters of the gazebo is an essential task of your project, therefore you have to tackle it with great care and attention. There are many design options to choose from, therefore you should choose the one that fits your tastes.

    In our example, we have used 2×2 balusters, placed every 3. The balusters should be 28-32 high, but you can adjust them according to your needs.

    How to build gazebo railings

    In order to build the balusters, you have to use proper techniques. The bottom and top railings should be secured with screws driven at angle, or locked with corner brackets.

    How to build gazebo frieze

    Use 2×4 boards to build the bottom and head rail of the frieze and 2×2 molding to build the balusters. In addition, make sure everything fits into place properly and has a neat look. In order to secure the balusters into place, drive nails through the bottom and top rail in the balusters.

    You can also toenail them, but it would take longer an the look wont be the same. The design of the frieze should match your house and garden.

    How to build a gazebo

    Fill the cracks and holes with wood putty and leave it to harden. Sand the wooden surfaces of the square gazebo with medium-grit sandpaper and protect the construction against water damage, by applying several coats of varnish.

    Diy Propane Fire Pit To Build For Your Backyard Or Patio

    25 Best of Small Gazebos For Decks

    Use these free gazebo plans to build an outdoor living area to relax and enjoy in outdoor shade structure. An outdoor gazebo is an easy and stylish way to add outdoor living space and value to your home. Unfortunately, many home owners overlook the valuable outdoor asset due to the stereotypical image of the backyard gazebo from yesteryear at their grandparents home and their desire to have a more modern and updated look for their landscape.

    The traditional octagon-shaped structure at the end of garden path or beside a landscaped pond can still be built and enjoyed, but there are many other gazebo ideas to choose from and one of them will fit perfectly into your landscape. The easy to build structures that provide outdoor shade dont even have to be built in the landscape, they can be incorporated into the design of a patio or deck.

    If youre considering adding a gazebo to your outdoor living space, look at these 33 DIY gazebo plans that will inspire you and provide you with the instructions on how to build it.

    Also check out pergola plans, carport plans and outdoor bench plans.

    Don’t Miss: How To Build A Patio Cover Attached To House


    RELATED ARTICLES

    Most Popular