Thursday, March 28, 2024
HomeFurnitureHow To Fix Patio Chair Seats

How To Fix Patio Chair Seats

How To Fix Sagging Patio Chairs Made Of Mesh Sling

DIY Patio Chair Repair

This group of outdoor chairs comes with mesh fabric that can get pretty slack from use over time. If you have these, you may have to repair them from time to time if you want to get the most out of them.

To fix the loose seat, here are the steps you need to follow.

Step 1: Start by measuring the chair for its width, length, and curvature.

Step 2: Get yourself a new sling based on the measurements. You can order these slings online on Amazon or acquire one from a patio fabric shop near you.


Step 3: Once you have your new sling handy, cut it according to the measurements you just took.

Step 4: Remove the old sling from the chair, ideally by sliding half of the chairs sling from the rail after removing the bolts and freeing the rail. Also, locate the spreader bar and remove it as well.

If you wish to repaint any part of the chair, consider doing it now before proceeding to the next steps. You may also want to repair the spreader bar at this point if it needs repairing.

Step 5: Separate the rail from the patio furniture and insert the nylon rod of the sling in the other rail. Ensure the slings hem side faces the rear of the chair.

Step 6: Slide the rail you removed back into its place and connect the rod that you detached from the opposite side of the frame. Next, return the spreader bar into its place, bending it slightly for better fitting if necessary.


Step 7: Finally, cut any excess rod to fit your chair using a wire cutter, and cover the rods with the end caps.

What Do You Put Under Couch Cushions

The following are things you can put under your couch cushions to prevent them from sagging or sinking:

i. Plywood It is a simple trick that doesnt require much. Just get plywood and place it under your cushion.

ii. Sagging sofa cushion supports Youll need to purchase these from furniture stores or online.

iii. New foam inserts Replace the old cushion foam with new ones.

iv. New springs for cushions that make use of springs.

v. Polyester fiberfill Open the cushion cover and stuff it with the fiber.

Dont Throw It Away Let Our Patio Chair Repair Company Fix It

Repair, dont replace your beautiful, high quality patio furniture. The Southern Company can add years or even decades to your furnitures usefulness through refinishing. Whether the legs have gotten a little bit wobbly, or the sling isnt providing the support it used to, or youd just like to update your look, now is the best time for your patio chair repair.

Contact The Southern Company today and let us breathe new life into your premium patio furniture. Our skilled technicians will make your furniture look and feel just like new for a fraction of what it would cost you to replace it.

Also Check: Hurricane Proof Outdoor Furniture


Screw The Slats In Place

Having removed the old sling and starting at the bottom, I began screwing the slats in place. I left a gap between each slat equal to a paint stir stick. This allows for expansion of the wood. There is nothing magic about this distance and I later thought I could of used a 1/4″ gap or more.I made an attempt to keep the slats level and learned I needed to try harder, or be content with imperfection–because I didn’t succeed at keeping them level, I guess I chose less than perfection is ok. The screw length is critical to this process. I made sure I had enough length to penetrate into the chair frame. On concave radius bends, a longer screw is needed. After I was done I decided to remove the first slat at the bottom. I remembered how shorter people complained at how the bottom slat pressed against their leg when sitting in an Adirondack chair I made.

Can Sling Patio Chairs Be Repaired

See how to save a ton of money with DIY patio chair repair ...

When its time to get those patio sling chairs out again, theres nothing worse than realising the fabric slings are sagging loose and need replacing. What about that BBQ party you had planned this weekend?

The slings on patio chairs can be repaired quite easily using a screwdriver, a razor knife and pliers. The best fabrics to use are Phifertex® and Sunbrella®, which are durable, water resistant, fade and mold resistant. They come in a variety of colors and are easy to clean with soapy water.

In this article well consider how to repair sling patio chairs in more detail, what fabrics to use and how to measure up your chair for the new fabric.

Read Also: How To Identify Vintage Wrought Iron Patio Furniture


S On Repairing Swivel Patio Chair

Step One: Unscrew the broken part of the chair from the remaining parts. Use a screwdriver or pliers to do this, as it will be difficult if not impossible without them!

The swivel chair is made up of two pieces that usually attach near one end and another at its bottom. Unscrew the screws that hold these two pieces together and then pull them apart.

Step Two: Put in a new screw to replace the broken one. If you are replacing one of the top screws, put it into place with your fingers at first. Then tighten it using pliers or another wrench tool. Repeat this for any other loose screws!

Step Three: Put the two pieces of your swivel chair back together, using the same technique as when you took them apart.

Step Four: Put all screws into place to ensure that they are not loose or jiggling around. You should also check how securely it is attached at either end before you use it again!


Tips for a more successful repair job include wearing some work gloves and making sure there isnt too much excess glue on any part of the piece where it was broken off from.

If this doesnt solve your problem then take a look at how to fix patio chairs with missing parts instead!

How Do You Fix A Rusty Swivel Chair

Step 1. First, find the screws that hold your chair together. They are usually located on the underside of the frame or in a hole near one of the legs. If you dont see any, look for them around the seat and back support area to be sure theyre present but not visible from an outside view.

Step 2. Take those screws out with either a screwdriver or socket wrench . There might also be another set inside holes opposite where you just removed some screwstaking these off will take less time than if they were left alone! Be careful when removing as this could cause more rusting because it pushes air into crevices. Use gloves if possible, too!

Once all bolts have been taken out, remove the seat from where its mounted. Lift on one end of the chair while sliding out a long metal bar that runs underneathyou should see how this is done because there will be two screws holding onto each side, and they need to come off as well.


Keep in mind how it was assembled before taking it apart so you can put it back together again without frustration! If all else fails, refer to your original instructions or call customer service for further assistance.

Step 3. Youll now want to take these bars and slide them through any other holes present near the frame . They might not have been in use yet depending on how rusty your item has becomecheck around for loose ones with this design.

Don’t Miss: Plastic Lawn Chair Webbing

Choosing New Sling Chair Fabric

The Southern Company carries over 100 replacement fabrics that can be used on any of the premium patio furniture brands. Having this range of quality fabrics available for reslinging means you get a virtually new patio set once weve done our job.

Consider the feel that youd like to create with your furniture this time around. Maybe you chose a neutral fabric when you bought your furniture , and now youd like to try something flashier. Do you need your new fabrics to fit in with existing design elements, or are you ready for a complete makeover? Is your patio furniture used mainly by adults, or are children and grandchildren regularly in the mix? All of these factors will have an impact on the fabric you ultimately choose.


Once a few designs have been picked out, take some time to actually imagine your furniture refinished in the new fabric. Will you still be loving that royal blue four years from now? Is the striped fabric elegant enough for your space? Is the neutral gray-brown shade tasteful or just boring? Ask for feedback from others before you commit.

How To Replace Fabric On Patio Chairs

Patio Furniture Repair – How to Reinforce Couch Seat to Support Cushions – by DIYNate

As we get ready for summer, its an excellent time to consider upgrading to luxury patio furniture brands sold by All American Outdoor Living. But if you have a sling-back chair that has seen better days, you can use this DIY guide to save you money and refresh your chairs.

1. Remove the old plastic end caps on the patio sling rail

First and foremost, you need to disassemble your patio sling chair to install the new sling fabric. Remove the plastic end caps from both ends of the sling rails with a flat head screwdriver or pliers. When removing your old end caps, be careful because they are often dry, brittle, and easy to crack. Take care not to damage them . Matching plastic caps can be difficult to locate depending on the manufacturer and color of your frames.

2. Remove the old sling material and spreader bars

It can be challenging to get the slings out of the rails at times. If the old slings are very old and have spent a lot of time in the sun, the plastic splines will be very brittle and rigid and will possibly break in chunks when you attempt to slide the old sling out of the rail. Youll find that the new slings and splines are a breeze to install, particularly when compared to removing the old ones.

The rusty, filthy fabric can easily slip out the sling rails bottom end. Grasp the sling with your hands or pliers and pull it away from the sling rail. Someone can keep the patio sling chair in place while someone else removes the old fabric from the rail.

Read Also: How To Build Wood Patio

Cushion Upholstery And Custom Custom Cushion Covers

Faded cushions can get a makeover with a simple change of material. This is far more economical than replacing the entire set. Our repair experts can reupholster your cushions in-house, and you can choose from hundreds of colors and patterns. One of our best outdoor fabric choices is Sunbrella upholstery fabric. Sunbrella is known as the industry gold standard when it comes to outdoor furniture fabric that will resist fading. It has the longest lifespan of anything on the market. It is specifically built to withstand the sun, rain, and wind.

Recommended Reading: Concrete Slab Without Rebar

Measure Out How Much Fabric You Need

Its going to save you time and headache if you measure out how much fabric you need before you start. It always helps to have everything you need handy.

To measure, you need to remove the old fabric from the patio furniture so you get an accurate measurement. Add to your measurement to account for seams.

Always measure twice before you cut anything. Its a golden rule.

You May Like: Hanging Lights On Patio Umbrella

Replacing Patio Chair Spline

Were going to replace the seat cord with new. But I am using a slightly larger cord this time around since the original cord clearly was able to pull right through the track. You can get this vinyl patio spline HERE.

Use the old cord that you remove to get the right length for the replacement cord.

Feed the new vinyl cord back into the opening for the patio chair seat.

Next, feed the mesh seat back into the track for the patio chair frame.

The cord will sit on the inside of the opening while the mesh seat on the outside.

Once you feed the entire mesh seat back into the track you can line up the seat with the chair frame.

Considering your repaired patio chair seat should be nice and tight or taught, whichever you prefer this may take a little muscle to get the seat in place.

Once in place, you can now resecure with the bolts that you removed earlier.

Your once broken patio chair can now be used allowing you to spend your money on things like BBQing and enjoying time with loved ones instead of new outdoor furniture.

Bright Blue Bar Cart With Cocktail Supplies

How to Save Yourself Money with DIY Patio Chair Repair

A bar cart always looks best with some yummy beverages on it! Using both shelves of the cart is great for parties you can store extra glasses and mixers on the bottom shelf and leave the top for drink prep and little snacks. Now lets party!

How to maintain it: Cast iron can be cleaned like most other outdoor furniture: apply a mixture of soapy water, then rinse clean. Many newer metal outdoor materials are made to be rust-resistant, but if yours isnt, use paste wax or naval jelly to add an extra layer of protection. Check for any cracked paint and address it before the metal becomes exposed to the elements. Both iron and other metal furniture can be left outdoors year-round.

How to fix it: Cast iron and metal furniture present a challenge other outdoor furniture materials dont: rust. If you spot a rust spot on your outdoor furniture, dont let it fester. If you dont address it when it is a minor issue, the metal will continue to oxidize around the original spot, and the rust will spread and become a more serious problem, eventually resulting in weak spots and holes that will ruin the piece.

How to Paint Metal Outdoor Patio Furniture01:57

Also Check: How To Level The Ground For Pavers

Can You Paint Vinyl Straps

Yes, however you need a specific kind of paint for flexible vinyl. You would need a specific paint for flexible vinyl because its flexibility would crack ordinary paint. Also, paint normally does not adhere well with vinyl.

If you wish to paint your vinyl, make sure its compatible first. Also, ensure that you apply it properly, otherwise sagging will occur.

Research whether your spray paint needs a base primer. If it does, coat your straps with acrylic latex primer.

Maintain appropriate distance about eight inches between the straps and the spray nozzle as you apply. After drying the straps, apply bonding primer, if your spray paint needs it. Otherwise, proceed to painting your patio chair straps, and then youre done!

Wed like to warn you, however, that painting your patio chair straps is challenging and you would need to consider a multitude of factors.

How To Repair Sagging Chair Seats

If your rear end sinks into your chair a bit more than you would like, it might not be because you weigh too much. It could also mean that the support in the chair has seen better days. Any type of chair supported by springs loses tension over time. The stiff, steel springs stretched from side to side on the framework stretch and the chair sags in the middle. You can reinforce those springs by adding some additional wire bracing to help the springs work together again. Take note that this type of spring isn’t coiled it lies flat.

1

Remove the cushion from the chair to reveal the springs. If the cushion won’t come out of the chair, it probably has a plywood bottom that’s cut out in the middle. If this is the case, tip the chair upside down and remove four screws penetrating upward through the chair’s framework into the plywood, using a drill/driver. Pop the plywood chair bottom out to reveal the springs.

2

Remove the light fabric covering the springs by pulling the staples around the perimeter, using a staple puller. Pull on the springs with your fingers. If you notice that some of the staples or brackets securing the springs to the framework are loose, tap them back in tightly, using a hammer.

3

4

5

Tips

Warnings

  • Wear safety glasses and be careful when working around springs. Some of them can have sharp ends where they are cut.

Writer Bio

Recommended Reading: Diy Concrete Slab Patio

Replacing The Worn Sling

Weather got to my patio chair slings. A few web sites were around $37 for a single replacement sling . Or $148+ total for 4 chairs and my labor. I checked out a few web sites and a great YouTube video by Sling Masters . After seeing what all is involved, like measuring, ordering, waiting, installing, I decided to resurface mine with wood slats. If you would rather replace with fabric slings, an Internet search will give several hits like these. http://www.patiodirectonline.com/Replacement_Slings.htmhttp://www.patioslingsite.com/products-page/chair-replacement-slings/replacement-chair-sling-1pc/If you want to do what I did, then for each chair you will need approximately :1″x3″, I bought 20 for $1.92 ea. 1-1/4 self drill screw, 1lb box for $5.37. 1-3/4″ or so length screw, 4. Paint or stain. I bought 1 gal. exterior for $39.98. All supplies came from Home Depot and totaled about $100. If you already have paint or stain, you can do 4 chairs for about $60. I like the savings, the weather resistant wood and I got to paint them with my wife’s favorite color. That last one buys benefits well worth the $100 spent. Ok, if I convinced you then let’s move on.


RELATED ARTICLES

Most Popular