Wednesday, July 17, 2024
HomeInstallHow To Hang Patio Lights

How To Hang Patio Lights

Build Your Own Supports

How to hang patio string lights

Our final method to hanging outdoor lights is to build your own supports. This is the most expensive and time-intensive option but it can be well worth the effort.

Although there are countless ways to build supports, my favorite method uses buckets and poles to ensure easy portability. In my opinion, this is far superior to a permanent method where you bury the pole in the actual ground.

My favorite method to build your own supports consists of placing support poles in two heavy-duty buckets and then adding in a heavy fill material.

I prefer wood poles but hollow metal poles and even PVC pipe also work well. I like to fill each bucket with gravel to hold the pole in place. However, for a somewhat more permanent design you can fill the buckets with concrete, like Quikrete.

Simply cut the poles to your desired height, place each in a bucket, fill the bucket with a heavy material, and hang your lights – voila, you’ve just completed one of my favorite patio lighting ideas!

How To Attach Light Strings With Clips

  • Measure The Perimeter-It is essential to measure the perimeter of the area that you want to decorate, so that you can get the right number of strings to comfortably cover the distance. Also, it will be helpful to know the color pattern you want to display, such as using only one color, randomly mixing colors, or alternating colors.
  • Get A Sufficient Number Of Clips-Purchase a large enough number of clips to cover the distance, with one clip every 6 to 8 inches it depends on the type of light you want to use. Bulb-type lights such as C7 use larger clips than mini lights or icicle lights.
  • Protect Clips With Adhesive-Use adhesive along the perimeter you want to decorate to secure the clips. It is advisable to follow the product instructions for applying the adhesive and allowing sufficient time for the adhesive to cure.
  • Test Light String-To ensure there are no burned-out or missing bulbs, test the light string by connecting the lights into an electrical outlet. Replace bulbs if necessary, and then unplug the lights and take them outside. Arrange the lights along the line of clips, place the cord in each clip as you go, and then plug the light string into an outdoor outlet, using an extension cord.

How To Hang Outdoor String Lights From Diy Posts: Secure Post With Tape

Place the planter on level ground and use a level on one side to make the post plumb. Add painter’s tape across the planter on all four sides of the post to hold it in position. Allow the concrete to harden according to the manufacturers instructions before proceeding.

Arrange the planters in a rectangle no more than 10′ apart.

Don’t Miss: Vintage Outdoor Furniture

How To Hang Small Christmas Lights On A Wall Without Using Nails And Making Holes

Related Articles

To drape your Christmas lights around the room the way you want them, you need to attach them to the walls in many places along the strands of wire. This can leave you with a series of small holes you need to patch at the end of the season and taking down the holiday decorations is sad enough without adding hours of extra work to the job. If your lights are small, the strands should be lightweight, which gives you several options for how to hang them without damaging the walls.

  • Stick a small adhesive decorating clip to the walls in each place you want to attach a strand of lights. To secure a vertical stretch of lights going straight up or down the wall, face the clips in alternating directions to make the arrangement more secure. In other words, attach the bottom clip facing left, the clip above it facing right, the third clip facing left and so on. Slide the strands of lights into the arrangement of clips to fasten them to the wall. This system works best on white plaster walls because adhesive decorating clips are most readily available in white.

  • Things You Will Need

    How Do You Hang Edison Lights Under Covered Patio Deck

    15 Best Ideas of Outdoor Hanging Lights for Patio

    To hang Edison lights under a covered patio, you’ll need to have hooks or screw eyes that are drilled underneath the ceiling of the covered patio or deck. Next, use silicon to do preventative shielding for water damage. Hang the string lights without the bulbs. Once the string lights are hung up, add the bulbs on along with an extension cord and automatic timer.

    Recommended Reading: How Do You Get Mildew Out Of Outdoor Cushions Without Bleach

    Tip : Invest In Decent

    This does not mean you need to drop hundreds of dollars on lights. It just means that you might not want to buy the cheapest option you can find. I spent an entire 2-hour Ramona nap one day browsing string lights and reading reviews.

    If you search outdoor string lights or outdoor globe lights on Google or Amazon, you get approximately 900 billion results to sort through. I quickly realized that the prices were much better on Amazon than they were through Target, so I started reading through Amazon reviews.

    I settled on the black globe string lights, way cheaper than the options at Target, from the Outdoor Lighting Store for a few reasons:

    • Reviews were great.
    • The lights came with extra bulbs.
    • Zip ties were included as well.
    • They claimed to have a warm glow instead of a bright white light.
    • Each strand could be connected to one another.
    • The company offered a two-year warranty and seemed to have pretty good customer service. You could also order new bulbs, which can be difficult with some string lights.

    How To Hang Patio String Lights & Considerations For Caf Lights

    Warm weather stirs us out of hibernation it’s only natural to find excuses to spend more time outside. Thoughts of summer nights inspire you to get crafty and start hanging up some cafĂ© style string lights. The only problem is that they just don’t quite look like you imagined. The string lights you purchased are either too short or too long. They just look wrong no matter how you arrange them. Even though this frustration doesn’t sound like a fun way to kick off the summer, your dreams for beautiful , patio, bistro or cafe string lights doesn’t have to end in tears.

    You May Like: How Many 50 Lb Bags Of Concrete In A Yard

    Hammock Or Hammock Chair

    The best backyard hammocks make your outdoor area even more relaxing. A comfortable hammock chair is yet another option. The Mock ONE is my personal favorite backyard hammock thanks to its built-in hammock stand, comfortable lay, and incredibly portability. Of course, normal patio furniture will also get the job done.

    Diy String Light Poles: The In

    How to hang string lights for your patio

    Our patio dining space is right next to the house, with no convenient trees nearby. So while we could hang them from hooks on the house side, we really needed some poles on the other side of the patio.

    We came up with this ultra-simple and inexpensive method for installing string light poles. The PVC stays in the ground year-round, but the poles themselves can be pulled out at the end of the season and stored in the garage. You can watch our quick video tutorial here:

    You May Like: Diy Patio Umbrella Lights

    Learn How To Hang Outdoor String Lights

    Learn how to use support cables to hang outdoor string lights over your patio or yard.

  • Make a plan

    See above for all the considerations . You will want to attach the cables at least 9 off the ground to allow for a bit of sag and for the lights to hang down. Once you have decided these details, measure the space, then order your lights and cable hanging materials.

  • Attach eye hooks perpendicular to the run of the cable

    There will be tension on the cable, obviously, so it is important that the eye hooks be installed securely. At least 9 off the ground, choose a position that will allow the eye hook to stick out perpendicular to the direction the cable will run. This will keep the pressure of the cable from trying to pull the screw hooks straight out of the tree. Use a hammer to tap the end of your eye hook into the tree. Once it is secure, begin screwing it in. You may have to repeat the tapping and screwing a few times as it makes its way through layers of bark. Eventually, though, it will catch and you can screw it in securely. To tighten the screw, using a screwdriver through the eye for leverage.

  • Run stainless steel cable

    Between each set of eye hooks, run stainless cable and secure using aluminum sleeves or other wire locks. Be sure to pull the cable tight before securing.

  • Finish

    Secure the end of your final strand to the last eye hook and enjoy!


    Do you have any other questions about hanging outdoor lights? Ask away! And dont forget to pin it.

    How To Hang String Lights If You Only Have A Patio

    The same ideas will apply! Instead of attaching the wood poles to a deck, I would suggest putting them into a planter and perhaps filling it with a small amount of cement to really weigh it down. Then fill the rest of the planter with some soil and succulents to make it pretty.

    You can also use command hooks to simple drape them across the side of your house, like we did!

    See how easy it is to hang string lights on a deck? We really love the effect these string lights have created on our deck and we’ve been spending so much more time outside enjoying our deck while the weather is still nice!

    P.S. Don’t forget to check out the full summer deck reveal!

    Don’t Miss: How To Add Drainage To Concrete Patio

    How To Hang String Lights: 10 Different Ways

    Outdoor string lights are wildly popular, and for good reason! They feel magical and bring a warm, intimate ambiance to any party or outdoor living space.

    Inexpensive, simple for the average person to DIY, relatively easy to put up and take down with the seasons, and the list goes on

    And if youre still not sure what kind of lighting is best for your outdoor living space, I walk through more backyard lighting options in this post.

    Remove Glass Bulbs Before Hanging

    How to Plan and Hang Patio Lights

    If you are using glass bulbs, its much easier to remove all of the glass bulbs before starting to hang. If youre just hanging one or two strands, you do not need to do this but if you are hanging multiple strings and criss-crossing, it is much easier to do this when youre not having to be careful of breaking the bulbs as you connect, drape, etc..

    Once you have all the strings hung and connectors secured, you just simply add the lights back in.

    Read Also: How To Clean Porch Cushions

    Coaxial Staples Work Best

    Coaxial staples are the best things to use if you are securing lights to wood like the side of your home or trees.

    As you can see above, the cord is secured by the staple opening.

    You can buy Coaxial staples at Home Depot, Lowes, etc.. in various sizes. Just check the size of your string light cord to get the right size.

    How We Hung Our Deck String Lights Privacy Screen And Artwork Outside

    Sharing how we hung our String Lights or rather our Deck Lights today. I am a accent lighting fanatic! We live in a 1950s home that really hasnt had any major updates to the exterior besides the small ascetic things we have done. So you arent going to find an outlet outside. If you are building a new home- this is where you make a mental note to add a plug in several spots outside. The plug issue wasnt going to stop me from having a glowing strand of String Lights off our back deck. Also added a privacy screen that I will share the details on this post too!

    Disclaimer- this is what WE did. It has worked really well for us but might not for you. Below is what we did and hopefully it will give you an idea that would work for you!

    **We went to Home Depot . We found some wood trim that we cut in half right there. Got home, spray painted them all. Installed them. Then realized they were too thin and not supportive enough. So we started over. That is when we used the 60 Wooden Garden Stake because they are thicker and taller. You could also use a plumbing pipe or a metal fence pole. We found that these worked just fine for our lights.

    In the above image you can see the Garden Stakes we used. How we spray painted them FIRST. Then attached mini hooks to the garden stake so we could loop the string lights around them.

    You May Like: How Many 80lb Bags Of Concrete In A Cubic Yard

    How To Hang Outdoor String Lights From Diy Posts: Paint Planters

    Wipe planters clean with a damp cloth. Place planters upside down on a drop cloth and cover completely with spray paint. Apply additional coats as necessary for full coverage. Turn planters over and paint the rim and inside the rim.

    Sam Henderson

    If desired, paint one end of the 2 x 2 x 8 posts with the same paint by masking off the last 5-6 with painters tape. Allow to dry completely before masking again at the end of the painted portion and 1 below that, leaving a 1 band to be painted.

    Purchasing Outdoor String Lights


    I purchased BrightTech Ambience Pro Outdoor String Lights. This string comes in a 45-foot string and uses vintage Edison bulbs with exposed filaments give off a warm, nostalgic glow. The Ambiance Pro light string is all black, has a hanger mounting hole and is a heavy duty cord, that is thicker than any other cords Ive seen. This string light is also dimmer compatible.

    The lights have 3 feet of spacing between each bulb and you can connect up to 8 strands end to end.

    Read Also: Charlie Bar For Sliding Door

    Attaching String Lights On A Stucco Wall With A Hot Glue Gun

    A. Measure the border you need to beautify with lights, such as your homes rooftop line, patio overhang, or around window outlines. Buy enough light strings to cover this separation serenely. Consider the shading design you intend to show, such as utilizing just one shading, exchanging two hues, or arbitrarily blending hues.

    B. Purchase an adequate number of clasps to cover this separation with one clasp each 6 to 8 inches, contingent upon the kind of lights you will utilize. Bulb-type lights, known as C7 or C9 bulbs, use bigger clasps than scaled downlights or icicle lights.

    Quick Tips For Hanging Outdoor String Lights

    Spring is here and beautiful summer nights are just around the corner! Today, I wanted to share some really easy quick tips and layout ideas for hanging outdoor string lights. Im also sharing my favorite sources for lights and things youll need to consider when purchasing outdoor string lights, bistro lights or cafe lights.

    Over the years, I have designed outdoor lighting layouts for outdoor events, client spaces and in my own outdoor space and it can be very challenging. I have learned so much over the years what works and what doesnt work and youll find all of my tips below.

    You May Like: Mold On Outdoor Furniture

    How To Hang Patio Lights Without Nails

    Summer has just come, and you have numerous plans, but your patio has not yet been revamped. This might make you get stressed, but there is no course for alarm! I have prepared for you numerous simple ideas which you can use to hang your patio lights without nails.

    5 Best-Selling Lights for Your Patio

    View Product

    Summer holidays are generally beautiful and full of life, and nothing beats a well light patio and their ability to improve the ambiance and general view of your space.

    Adding lights can transform your space from an ordinary backyard to a party-ready soft spot and cheer up dim pathways with inviting luminescence.

    Lets explore the various ways that can easily be implemented to hang your patio lights without nails.

    Image Source Deavita

    This technique is straightforward and leaves your walls undamaged. Estimate the gaps you want to maintain between each hanging light and stick the gutter hooks at these intervals.

    Hang in your string light and let them dropdown. The straight, bright lines slanting down your wall brings an ecstatic view to your outdoor space.

    You May Like: Do Yourself Patio Paver Kits

    Tips And Tricks For Hanging String Lights Under Covered Patio Deck

    How to Hang Patio String Lights

    Clean design. Initially, I had wanted the lights to be angled from one corner to the next. Since we had a fan installed, it would be too much for the space.For our space, I wanted to stay clear of a cluttered ceiling, so we opted for the perimeter to be lighted.

    However, if you have a fairly open space, I would recommend looking up various ways you can hang the lights .

    Measure Your Space. Before you even think about ordering your lights, measure your space and your design. It’s important to think about how you’ll get the light to the outlet, especially if you want to hang the long leading end. Measure your space and your initial design so that you get enough length.

    Anchor Ports. Make sure you have anchor ports for the light strands. In our space, since we were securing it around the perimeter, it wasn’t that big of a deal.

    Use hooks and silicone. If you plan on adding holes to the outside walks, I would recommend using caulking silicone around the hooks to keep the hole from wearing with the weather as well as keeping the bugs out.

    Keep the lights away from the wall. While the lights don’t emit that much power, we wanted to avoid any heat to the structures surrounding it as much as possible. As a hack, we added zip ties to the hooks and cut them. The zip ties effectively worked as spacers on the hooks to keep the lights away from the wall. It was cheap and worked.

    You May Like: How To Measure A Patio Door


    Most Popular